display telnet client
Use display telnet client to display the source IPv4 address or source line configured for the device to use for outgoing Telnet packets when serving as a Telnet client.
Syntax
display telnet client
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# Display the Telnet client configuration of the device when it serves as a Telnet client.
<Sysname> display telnet client The source IP address is 1.1.1.1.
The output shows that the device uses the source IPv4 address 1.1.1.1 for outgoing Telnet packets when it serves as a Telnet client.
Related commands
telnet client source