fip-snooping port-mode

Use fip-snooping port-mode to configure the mode of an Ethernet interface.

Use undo fip-snooping port-mode to restore the default.

Syntax

fip-snooping port-mode { enode | fcf }

undo fip-snooping port-mode

Default

An Ethernet interface operates in ENode mode.

Views

Layer 2 Ethernet interface view, Layer 2 aggregate interface view

Predefined user roles

network-admin

mdc-admin

Parameters

enode: Specifies the ENode mode.

fcf: Specifies the FCF mode.

Usage guidelines

Ethernet interfaces on a Transit switch can operate in ENode mode or FCF mode.

• An Ethernet interface connected to an ENode must be configured to operate in ENode mode.

• An Ethernet interface connected to an FCF switch must be configured to operate in FCF mode.

Examples

# Configure interface FortyGigE 1/0/2 to operate in FCF mode.

<Sysname> system-view
[Sysname] interface fortygige 1/0/2
[Sysname-FortyGigE1/0/2] fip-snooping port-mode fcf