evi neighbor-discovery server enable

Use evi neighbor-discovery server enable to enable ENDS on an EVI tunnel interface.

Use undo evi neighbor-discovery server enable to disable ENDS on an EVI tunnel interface.

Syntax

evi neighbor-discovery server enable

undo evi neighbor-discovery server enable

Default

ENDS is disabled.

Views

Tunnel interface view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

When you enable ENDS on an EVI tunnel interface, an ENDC is automatically enabled, with the source address of the EVI tunnel as the ENDS address. You can use the evi neighbor-discovery client register-interval command to modify the interval at which the ENDC registers with the ENDS.

Examples

# Enable ENDS.

<Sysname> system
[Sysname] interface tunnel 0 mode evi
[Sysname-Tunnel0] evi neighbor-discovery server enable

Related commands

display evi neighbor-discovery server summary