evi flooding enable
Use evi flooding enable to enable EVI flooding for all destination-unknown frames.
Use undo evi flooding enable to restore the default.
Syntax
evi flooding enable
undo evi flooding enable
Default
EVI flooding is disabled. The device floods unknown unicast and multicast frames only to internal interfaces.
Views
Tunnel interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
EVI flooding enables the device to flood all destination-unknown frames to an EVI tunnel interface.
If selective flooding is also configured for a MAC address, the device floods the frames destined for the MAC address regardless of the VLAN settings configured by using the evi selective-flooding mac-address command.
As a best practice, do not configure both the evi flooding enable command and the evi selective-flooding mac-address command to ensure correct EVI flooding.
Examples
# Enable EVI flooding on Tunnel 101.
<Sysname> system-view [Sysname] interface tunnel 101 mode evi [Sysname-tunnel101] evi flooding enable
Related commands
evi selective-flooding mac-address