display evi isis brief
Use display evi isis brief to display brief information about EVI IS-IS processes.
Syntax
display evi isis brief [ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
process-id: Specifies an EVI IS-IS process ID in the range of 0 to 65535. If you do not specify a process, this command displays brief information about all EVI IS-IS processes.
Examples
# Display brief information about an EVI IS-IS process.
<Sysname> display evi isis brief Site ID: 10 Isolation Count: 0 Process ID: 0 Network-entity: 00.0011.2200.0001.00 LSP-length receive: 16384 LSP-length originate: 1400 Timers: LSP-max-age: 1200s LSP-refresh: 900s
Table 2: Command output
Field | Description |
---|---|
Network-entity | Network entity name of the EVI IS-IS process. |
Site ID | Local site ID. |
Isolation Count | Number of remote sites that have isolated the device because of site ID conflict.
|
LSP-length receive | Maximum length of incoming LSPs. |
LSP-length originate | Maximum length of LSPs that the EVI IS-IS process can generate. |
Timers | LSP-max-age—Maximum lifetime for the LSPs generated by the EVI IS-IS process. LSP-refresh—Interval at which the EVI IS-IS process sends LSPs to refresh remote LSDBs. |