packet-filter continuous enable

Use packet-filter continuous enable to enable the continuous mode for packet filtering.

Use undo packet-filter continuous enable to disable the continuous mode for packet filtering.

Syntax

packet-filter continuous enable

undo packet-filter continuous enable

Default

The continuous mode is enabled for packet filtering.

Views

System view

Predefined user roles

network-admin

Usage guidelines

The continuous mode takes effect only on packet filtering configured in system view and interface view.

After the continuous mode is enabled, packet filtering on the list of VLAN interfaces goes invalid.

After the continuous mode is disabled, modifying, deleting, or adding a rule in the ACL of a packet filter causes the packet filter to be invalid for a short time.

If you enable the continuous mode before configuring packet filtering, the continuous mode takes effect immediately.

If you enable or disable the continuous mode after configuring packet filtering, you must reboot the device for the continuous mode configuration to take effect.

Examples

# Enable the continuous mode for packet filtering.

<Sysname> system-view
[Sysname] packet-filter continuous enable
Enable the continuous mode for packet filter? [Y/N]:y
For the continuous mode to take effect, save the configuration, and then reboot the device.