display buffer usage
Use display buffer usage to display buffer usage.
Syntax
display buffer usage [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID (slot number). If you do not specify an IRF member device, this command displays buffer usage for all IRF member devices.
Examples
# Display buffer usage.
<Sysname> display buffer usage
Egress total-shared cell buffer usage on slot 1 :
XPE 0
Total: 4033 KB
Used: 0 KB
Free: 4033 KB
XPE 1
Total: 4033 KB
Used: 0 KB
Free: 4033 KB
XPE 2
Total: 4033 KB
Used: 0 KB
Free: 4033 KB
XPE 3
Total: 4033 KB
Used: 0 KB
Free: 4033 KB
5sec 1min 5min
------------------------------------------------------------------
HGE1/0/1 XPE 0 0% 0% 0%
XPE 1 -- -- --
XPE 2 0% 0% 0%
XPE 3 -- -- --
…
Table 51: Command output
Field | Description |
|---|---|
Egress total-shared cell buffer usage on slot | Usage of cell resources in the shared area on an IRF member device. |
XPE | Model of the data buffer. |
Total | Total size of the data buffer. |
Used | Size of used data buffer. |
Free | Size of free data buffer. |
5sec | Percentage of the buffer that the port uses for the last 5 seconds. |
1min | Percentage of the buffer that the port uses for the last 1 minute. |
5min | Percentage of the buffer that the port uses for the last 5 minutes. |