buffer apply
Use buffer apply to apply manually configured data buffer settings.
Use undo buffer apply to restore the default.
Syntax
buffer apply
undo buffer apply
Views
System view
Predefined user roles
network-admin
Usage guidelines
For data buffer settings to take effect, you must execute this command after configuring data buffer settings.
After applying manually configured data buffer settings, you cannot directly modify the applied settings. To modify them, you must cancel the application, reconfigure data buffer settings, and reapply the new settings.
This command might cause the PFC function to be on longer in effect or to operate incorrectly. For information about PFC configuration commands, see Layer 2—LAN Switching Command Reference.
Examples
# Apply manually configured data buffer settings.
<Sysname> system-view [Sysname] buffer apply