A
- access control
- SNMP MIB, MIB and view-based MIB access control
- SNMP view-based MIB, MIB and view-based MIB access control
- accessing
- NTP access control, NTP access control
- NTP access control rights, Configuring access control rights
- SNMP access control mode, Access control modes
- ACS
- CWMP ACS-CPE autoconnect, Autoconnect between ACS and CPE
- action
- Event MIB notification, Event actions
- Event MIB notification action configuration, Configuring a notification action for an event
- Event MIB set, Event actions
- Event MIB set action configuration, Configuring a set action for an event
- address
- ping address reachability determination, Ping example
- agent
- Puppet, Puppet agent
- sFlow agent+collector information configuration, Configuring the sFlow agent and sFlow collector information
- alarm
- RMON alarm configuration, Configuring the RMON alarm function, Alarm function configuration example
- RMON alarm group sample types, Sample types for the alarm group and the private alarm group
- RMON configuration, Configuring RMON
- RMON group, Alarm group
- RMON private group, Private alarm group
- Appendix A
- NETCONF supported operations, Appendix A Supported NETCONF operations
- applying
- flow mirroring QoS policy, Applying a QoS policy
- flow mirroring QoS policy (control plane), Applying a QoS policy to the control plane
- flow mirroring QoS policy (global), Applying a QoS policy globally
- flow mirroring QoS policy (interface), Applying a QoS policy to an interface
- flow mirroring QoS policy (VLAN), Applying a QoS policy to a VLAN
- architecture
- NTP, NTP architecture
- arithmetic
- packet capture filter configuration (expr relop expr expression), The expr relop expr expression
- packet capture filter configuration (proto [ exprsize ] expression), The proto [ expr:size ] expression
- packet capture filter operator, Capture filter operators
- packet capture operator, Filter elements
- assigning
- CWMP ACS attribute (preferred)(CLI), Configuring the preferred ACS attributes from the CLI
- CWMP ACS attribute (preferred)(DHCP server), Assigning ACS attributes from the DHCP server
- port mirroring monitor port to remote probe VLAN, Assigning the monitor port to the remote probe VLAN
- associating
- IPv6 NTP client/server association mode, IPv6 NTP client/server mode configuration example
- IPv6 NTP multicast association mode (on switch), IPv6 NTP multicast mode configuration example
- IPv6 NTP symmetric active/passive association mode, IPv6 NTP symmetric active/passive mode configuration example
- NTP association mode, Configuring NTP association mode
- NTP broadcast association mode, Association modes, Configuring NTP in broadcast mode
- NTP broadcast association mode (on switch), NTP broadcast mode configuration example
- NTP broadcast association mode+authentication (on switch), Configuration example for NTP broadcast mode with authentication
- NTP client/server association mode, Association modes, Configuring NTP in client/server mode, NTP client/server mode configuration example
- NTP client/server association mode+authentication, Configuration example for NTP client/server mode with authentication
- NTP multicast association mode, Association modes, Configuring NTP in multicast mode
- NTP multicast association mode (on switch), NTP multicast mode configuration example
- NTP symmetric active/passive association mode, Association modes, Configuring NTP in symmetric active/passive mode, NTP symmetric active/passive mode configuration example
- authenticating
- CWMP CPE ACS authentication, Configuring ACS authentication parameters
- NTP, NTP authentication
- NTP broadcast authentication, Configuring NTP authentication in broadcast mode
- NTP broadcast mode+authentication (on switch), Configuration example for NTP broadcast mode with authentication
- NTP client/server mode authentication, Configuring NTP authentication in client/server mode
- NTP client/server mode+authentication, Configuration example for NTP client/server mode with authentication
- NTP configuration, Configuring NTP authentication
- NTP multicast authentication, Configuring NTP authentication in multicast mode
- NTP security, NTP security
- NTP symmetric active/passive mode authentication, Configuring NTP authentication in symmetric active/passive mode
- SNMP silence, SNMP silence
- SNTP authentication, Configuring SNTP authentication
- auto
- CWMP ACS-CPE autoconnect, Autoconnect between ACS and CPE
- autoconfiguration server (ACS)
- CWMP, CWMP network framework
- CWMP ACS authentication parameters, Configuring ACS authentication parameters
- CWMP attribute configuration, Configuring ACS attributes
- CWMP attribute type (default)(CLI), Configuring the default ACS attributes from the CLI
- CWMP attributes (preferred), Configuring the preferred ACS attributes
- CWMP autoconnect parameters, Configuring autoconnect parameters
- CWMP CPE ACS provision code, Configuring the provision code
- CWMP CPE connection interface, Configuring the CWMP connection interface
- HTTPS SSL client policy, Specifying an SSL client policy for HTTPS connection to ACS
- automated deployment
- VCF fabric, Automated VCF fabric provisioning and deployment
- automated overlay network deployment
- guidelines, Configuration restrictions and guidelines
- restrictions, Configuration restrictions and guidelines
- automated provisioning
- VCF fabric, Automated VCF fabric provisioning and deployment
- automated underlay network provisioning
- guidelines, Configuration restrictions and guidelines
- restrictions, Configuration restrictions and guidelines
- automated VCF fabric provisioning and deployment
- configuration, Automated VCF fabric configuration example
- automtaed underlay network provisioning
- template file, Template file
B
- bidirectional
- port mirroring, Mirroring direction
- Boolean
- Event MIB trigger test, Boolean test
- Event MIB trigger test configuration, Configuring a Boolean trigger test, Boolean trigger test configuration example
- broadcast
- NTP association mode (on switch), NTP broadcast mode configuration example
- NTP broadcast association mode, Association modes, Configuring NTP in broadcast mode, Configuring NTP authentication in broadcast mode
- NTP broadcast association mode+authentication (on switch), Configuration example for NTP broadcast mode with authentication
- NTP broadcast client configuration, Configuring a broadcast client
- NTP broadcast mode dynamic associations max, Configuring the maximum number of dynamic associations
- NTP broadcast server configuration, Configuring the broadcast server
- buffer
- information center log buffer, Outputting logs to the log buffer
- building
- packet capture display filter, Building a display filter
- packet capture filter, Building a capture filter
C
- capturing
- packet capture configuration, Configuring the packet capture, Packet capture configuration examples
- packet capture configuration (remote), Remote packet capture configuration example
- packet capture file save, Saving captured packets to a file configuration example
- packet capture filtered data display, Filtering packet data to display configuration example
- packet configuration, Packet capture configuration task list
- changing
- NETCONF parameter value, Example for changing the value of a parameter
- Chef. See
- aget, Chef network framework
- Chef resources, Chef resources
- client, Chef client
- configuration, Configuring Chef, Configuring Chef, Starting Chef, Shutting down Chef, Chef configuration example
- configuration file, Chef configuration file
- master, Chef network framework
- network framework, Chef network framework, Chef server, Workstation, Chef client
- resources, Chef resources
- server, Chef server
- shutting down Chef, Shutting down Chef
- starting up Chef, Starting Chef, Configuring the Chef server, Configuring a workstation, Configuring a Chef client
- workstation, Workstation
- classifying
- port mirroring classification, Port mirroring classification and implementation
- CLI
- EAA configuration, Configuring EAA, EAA configuration examples
- EAA event monitor policy configuration, CLI event monitor policy configuration example
- EAA monitor policy configuration, Configuring a monitor policy from the CLI
- EAA monitor policy configuration (CLI-defined+environment variables), CLI-defined policy with EAA environment variables configuration example
- NETCONF CLI operations, Performing CLI operations through NETCONF, CLI operation example
- NETCONF device management, How to use NETCONF
- NETCONF return to CLI, Returning to the CLI
- client
- Chef, Chef client
- NQA client history record save, Configuring the saving of NQA history records
- NQA client operation (DHCP), Configuring the DHCP operation
- NQA client operation (DLSw), Configuring the DLSw operation
- NQA client operation (DNS), Configuring the DNS operation
- NQA client operation (FTP), Configuring the FTP operation
- NQA client operation (HTTP), Configuring the HTTP operation
- NQA client operation (ICMP echo), Configuring the ICMP echo operation
- NQA client operation (ICMP jitter), Configuring the ICMP jitter operation
- NQA client operation (path jitter), Configuring the path jitter operation
- NQA client operation (SNMP), Configuring the SNMP operation
- NQA client operation (TCP), Configuring the TCP operation
- NQA client operation (UDP echo), Configuring the UDP echo operation
- NQA client operation (UDP jitter), Configuring the UDP jitter operation
- NQA client operation (UDP tracert), Configuring the UDP tracert operation
- NQA client operation (voice), Configuring the voice operation
- NQA client operation scheduling, Scheduling the NQA operation on the NQA client
- NQA client statistics collection, Configuring the NQA statistics collection feature
- NQA client template, Configuring NQA templates on the NQA client
- NQA client template (DNS), Configuring the DNS template
- NQA client template (FTP), Configuring the FTP template
- NQA client template (HTTP), Configuring the HTTP template
- NQA client template (HTTPS), Configuring the HTTPS template
- NQA client template (ICMP), Configuring the ICMP template
- NQA client template (RADIUS), Configuring the RADIUS template
- NQA client template (SSL), Configuring the SSL template
- NQA client template (TCP half open), Configuring the TCP half open template
- NQA client template (TCP), Configuring the TCP template
- NQA client template (UDP), Configuring the UDP template
- NQA client template optional parameters, Configuring optional parameters for the NQA template
- NQA client threshold monitoring, Threshold monitoring, Configuring threshold monitoring
- NQA client+Track collaboration, Configuring the collaboration feature
- NQA collaboration configuration (on switch), NQA collaboration configuration example
- NQA enable, Enabling the NQA client
- NQA operation, Configuring NQA operations on the NQA client
- NQA operation configuration (DHCP)(on switch), DHCP operation configuration example
- NQA operation configuration (DLSw), DLSw operation configuration example
- NQA operation configuration (DNS), DNS operation configuration example
- NQA operation configuration (FTP), FTP operation configuration example
- NQA operation configuration (HTTP), HTTP operation configuration example
- NQA operation configuration (ICMP echo), ICMP echo operation configuration example
- NQA operation configuration (ICMP jitter), ICMP jitter operation configuration example
- NQA operation configuration (path jitter), Path jitter operation configuration example
- NQA operation configuration (SNMP), SNMP operation configuration example
- NQA operation configuration (TCP), TCP operation configuration example
- NQA operation configuration (UDP echo), UDP echo operation configuration example
- NQA operation configuration (UDP jitter), UDP jitter operation configuration example
- NQA operation configuration (UDP tracert), UDP tracert operation configuration example
- NQA operation configuration (voice), Voice operation configuration example
- NTP broadcast client configuration, Configuring a broadcast client
- NTP multicast client configuration, Configuring a multicast client
- SNTP configuration, Configuration task list, Configuring SNTP, Configuration task list, SNTP configuration example
- client/server
- IPv6 NTP client/server association mode, IPv6 NTP client/server mode configuration example
- NTP association mode, Association modes, Configuring NTP in client/server mode
- NTP client/server association mode, Configuring NTP authentication in client/server mode, NTP client/server mode configuration example
- NTP client/server association mode+authentication, Configuration example for NTP client/server mode with authentication
- NTP client/server mode dynamic associations max, Configuring the maximum number of dynamic associations
- clock
- NTP local clock as reference source, Configuring the local clock as a reference source
- close-wait timer (CWMP ACS), Setting the close-wait timer
- collaborating
- NQA client+Track function, Configuring the collaboration feature
- NQA+Track collaboration, Collaboration
- collecting
- sFlow agent+collector information configuration, Configuring the sFlow agent and sFlow collector information
- troubleshooting sFlow remote collector cannot receive packets, The remote sFlow collector cannot receive sFlow packets
- common
- information center common logs, Log types
- comparing
- packet capture display filter operator, Display filter operators
- packet capture filter operator, Capture filter operators
- conditional match
- NETCONF data filtering, Example for filtering data by conditional match
- NETCONF data filtering (column-based), Conditional match filtering
- configuration file
- Chef, Chef configuration file
- configuring
- automated overlay network deployment, Configuring automated overlay network deployment
- automated underlay network provisioning, Configuring automated underlay network provisioning
- automated VCF fabric provisioning and deployment, Automated VCF fabric configuration example
- Chef, Configuring Chef, Configuring Chef, Chef configuration example
- Chef client, Configuring a Chef client
- Chef server, Configuring the Chef server
- CWMP, Configuring CWMP, Configuration task list, CWMP configuration example
- CWMP ACS attribute, Configuring ACS attributes
- CWMP ACS attribute (default)(CLI), Configuring the default ACS attributes from the CLI
- CWMP ACS attribute (preferred), Configuring the preferred ACS attributes
- CWMP ACS autoconnect parameters, Configuring autoconnect parameters
- CWMP ACS close-wait timer, Setting the close-wait timer
- CWMP ACS connection retry max number, Setting the maximum number of connection retries
- CWMP ACS periodic Inform feature, Configuring the periodic Inform feature
- CWMP CPE ACS authentication parameters, Configuring ACS authentication parameters
- CWMP CPE ACS connection interface, Configuring the CWMP connection interface
- CWMP CPE ACS provision code, Configuring the provision code
- CWMP CPE attribute, Configuring CPE attributes
- CWMP CPE NAT traversal, Enabling NAT traversal for the CPE
- EAA, Configuring EAA, EAA configuration examples
- EAA environment variable (user-defined), Configuring a user-defined EAA environment variable
- EAA event monitor policy (CLI), CLI event monitor policy configuration example
- EAA event monitor policy (Track), Track event monitor policy configuration example
- EAA monitor policy, Configuring a monitor policy
- EAA monitor policy (CLI), Configuring a monitor policy from the CLI
- EAA monitor policy (CLI-defined+environment variables), CLI-defined policy with EAA environment variables configuration example
- EAA monitor policy (Tcl), Configuring a monitor policy by using Tcl
- EAA monitor policy (Tcl-defined), Tcl-defined policy configuration example
- Event MIB, Configuring the Event MIB, Event MIB configuration task list
- Event MIB notification action, Configuring a notification action for an event
- Event MIB object list, Configuring Event MIB object lists
- Event MIB sampling, Configuring Event MIB sampling
- Event MIB set action, Configuring a set action for an event
- Event MIB trigger test, Configuring a trigger
- Event MIB trigger test (Boolean), Configuring a Boolean trigger test, Boolean trigger test configuration example
- Event MIB trigger test (existence), Configuring an existence trigger test, Existence trigger test configuration example
- Event MIB trigger test (threshold), Configuring a threshold trigger test, Threshold trigger test configuration example
- feature image-based packet capture, Configuring feature image-based packet capture
- flow mirroring, Configuring flow mirroring, Flow mirroring configuration task list, Flow mirroring configuration example
- flow mirroring match criteria, Configuring match criteria
- flow mirroring QoS policy, Configuring a QoS policy
- flow mirroring traffic behavior, Configuring a traffic behavior
- information center, Configuring the information center, Information center configuration task list, Information center configuration examples
- information center log output (console), Configuration example for outputting logs to the console
- information center log output (Linux log host), Configuration example for outputting logs to a Linux log host
- information center log output (UNIX log host), Configuration example for outputting logs to a UNIX log host
- information center log suppression, Configuring log suppression for a module
- information center trace log file max size, Configuring the maximum size of the trace log file
- IPv6 NTP client/server association mode, IPv6 NTP client/server mode configuration example
- IPv6 NTP multicast association mode (on switch), IPv6 NTP multicast mode configuration example
- IPv6 NTP symmetric active/passive association mode, IPv6 NTP symmetric active/passive mode configuration example
- Layer 2 remote port mirroring, Configuring Layer 2 remote port mirroring
- Layer 2 remote port mirroring (egress port), Layer 2 remote port mirroring with egress port configuration task list, Layer 2 remote port mirroring configuration example (with egress port)
- Layer 2 remote port mirroring (reflector port), Layer 2 remote port mirroring with reflector port configuration task list, Layer 2 remote port mirroring configuration example (reflector port)
- Layer 3 remote port mirroring, Configuring Layer 3 remote port mirroring, Layer 3 remote port mirroring configuration example
- Layer 3 remote port mirroring local group, Configuring local mirroring groups
- Layer 3 remote port mirroring local group monitor port, Configuring the monitor port for a local mirroring group
- Layer 3 remote port mirroring local group monitor port (interface view), Configuring the monitor port in interface view
- Layer 3 remote port mirroring local group monitor port (system view), Configuring the monitor port in system view
- Layer 3 remote port mirroring local group source CPU, Configuring source CPUs for a local mirroring group
- Layer 3 remote port mirroring local group source ports, Configuring source ports for a local mirroring group
- Layer 3 remote port mirroring local group source ports (interface view), Configuring source ports in interface view
- Layer 3 remote port mirroring local group source ports (system view), Configuring source ports in system view
- local packet capture, Configuring local packet capture
- local port mirroring, Configuring local port mirroring
- local port mirroring (source CPU mode), Local port mirroring configuration example (in source CPU mode)
- local port mirroring (source port mode), Local port mirroring configuration example (in source port mode)
- local port mirroring group monitor port, Configuring the monitor port for the local mirroring group
- local port mirroring group monitor port (interface view), Configuring the monitor port in interface view
- local port mirroring group monitor port (system view), Configuring the monitor port in system view
- local port mirroring group source CPU, Configuring source CPUs for the local mirroring group
- local port mirroring group source ports, Configuring source ports for the local mirroring group
- local port mirroring group source ports (interface view), Configuring source ports in interface view
- local port mirroring group source ports (system view), Configuring source ports in system view
- NETCONF, Configuring NETCONF, NETCONF configuration task list
- NETCONF over SOAP, Configuring NETCONF over SOAP
- NQA, Configuring NQA, NQA configuration task list, NQA configuration examples
- NQA client history record save, Configuring the saving of NQA history records
- NQA client operation, Configuring NQA operations on the NQA client
- NQA client operation (DHCP), Configuring the DHCP operation
- NQA client operation (DLSw), Configuring the DLSw operation
- NQA client operation (DNS), Configuring the DNS operation
- NQA client operation (FTP), Configuring the FTP operation
- NQA client operation (HTTP), Configuring the HTTP operation
- NQA client operation (ICMP echo), Configuring the ICMP echo operation
- NQA client operation (ICMP jitter), Configuring the ICMP jitter operation
- NQA client operation (path jitter), Configuring the path jitter operation
- NQA client operation (SNMP), Configuring the SNMP operation
- NQA client operation (TCP), Configuring the TCP operation
- NQA client operation (UDP echo), Configuring the UDP echo operation
- NQA client operation (UDP jitter), Configuring the UDP jitter operation
- NQA client operation (UDP tracert), Configuring the UDP tracert operation
- NQA client operation (voice), Configuring the voice operation
- NQA client operation optional parameters, Configuring optional parameters for the NQA operation
- NQA client statistics collection, Configuring the NQA statistics collection feature
- NQA client template, Configuring NQA templates on the NQA client
- NQA client template (DNS), Configuring the DNS template
- NQA client template (FTP), Configuring the FTP template
- NQA client template (HTTP), Configuring the HTTP template
- NQA client template (HTTPS), Configuring the HTTPS template
- NQA client template (ICMP), Configuring the ICMP template
- NQA client template (RADIUS), Configuring the RADIUS template
- NQA client template (SSL), Configuring the SSL template
- NQA client template (TCP half open), Configuring the TCP half open template
- NQA client template (TCP), Configuring the TCP template
- NQA client template (UDP), Configuring the UDP template
- NQA client template optional parameters, Configuring optional parameters for the NQA template
- NQA client threshold monitoring, Configuring threshold monitoring
- NQA client+Track collaboration, Configuring the collaboration feature
- NQA collaboration (on switch), NQA collaboration configuration example
- NQA operation (DHCP)(on switch), DHCP operation configuration example
- NQA operation (DLSw), DLSw operation configuration example
- NQA operation (DNS), DNS operation configuration example
- NQA operation (FTP), FTP operation configuration example
- NQA operation (HTTP), HTTP operation configuration example
- NQA operation (ICMP echo), ICMP echo operation configuration example
- NQA operation (ICMP jitter), ICMP jitter operation configuration example
- NQA operation (path jitter), Path jitter operation configuration example
- NQA operation (SNMP), SNMP operation configuration example
- NQA operation (TCP), TCP operation configuration example
- NQA operation (UDP echo), UDP echo operation configuration example
- NQA operation (UDP jitter), UDP jitter operation configuration example
- NQA operation (UDP tracert), UDP tracert operation configuration example
- NQA operation (voice), Voice operation configuration example
- NQA server, Configuring the NQA server
- NQA template (DNS), DNS template configuration example
- NQA template (FTP), FTP template configuration example
- NQA template (HTTP), HTTP template configuration example
- NQA template (HTTPS), HTTPS template configuration example
- NQA template (ICMP), ICMP template configuration example
- NQA template (RADIUS), RADIUS template configuration example
- NQA template (SSL), SSL template configuration example
- NQA template (TCP half open), TCP half open template configuration example
- NQA template (TCP), TCP template configuration example
- NQA template (UDP), UDP template configuration example
- NTP, Configuring NTP, Configuration task list, NTP configuration examples
- NTP access control rights, Configuring access control rights
- NTP association mode, Configuring NTP association mode
- NTP broadcast association mode, Configuring NTP in broadcast mode
- NTP broadcast association mode (on switch), NTP broadcast mode configuration example
- NTP broadcast client, Configuring a broadcast client
- NTP broadcast mode authentication, Configuring NTP authentication in broadcast mode
- NTP broadcast mode+authentication (on switch), Configuration example for NTP broadcast mode with authentication
- NTP broadcast server, Configuring the broadcast server
- NTP client/server association mode, Configuring NTP in client/server mode, NTP client/server mode configuration example
- NTP client/server mode authentication, Configuring NTP authentication in client/server mode
- NTP client/server mode+authentication, Configuration example for NTP client/server mode with authentication
- NTP dynamic associations max, Configuring the maximum number of dynamic associations
- NTP local clock as reference source, Configuring the local clock as a reference source
- NTP multicast association mode, Configuring NTP in multicast mode
- NTP multicast association mode (on switch), NTP multicast mode configuration example
- NTP multicast client, Configuring a multicast client
- NTP multicast mode authentication, Configuring NTP authentication in multicast mode
- NTP multicast server, Configuring the multicast server
- NTP optional parameters, Configuring NTP optional parameters
- NTP symmetric active/passive association mode, Configuring NTP in symmetric active/passive mode, NTP symmetric active/passive mode configuration example
- NTP symmetric active/passive mode authentication, Configuring NTP authentication in symmetric active/passive mode
- packet capture, Configuring the packet capture, Packet capture configuration task list, Packet capture configuration examples
- packet capture (remote), Remote packet capture configuration example
- packet capture file save, Saving captured packets to a file configuration example
- packet capture filtered data display, Filtering packet data to display configuration example
- PMM kernel thread deadloop detection, Configuring kernel thread deadloop detection
- PMM kernel thread starvation detection, Configuring kernel thread starvation detection
- port mirroring, Port mirroring configuration examples
- port mirroring remote destination group monitor port, Configuring the monitor port for a remote destination group
- port mirroring remote destination group remote probe VLAN, Configuring the remote probe VLAN for a remote destination group
- Puppet, Configuring Puppet, Configuring Puppet, Puppet configuration example
- remote packet capture, Configuring remote packet capture
- remote port mirroring destination group, Configuring a remote destination group on the destination device
- remote port mirroring source group, Configuring a remote source group on the source device
- remote port mirroring source group egress port, Configuring the egress port for a remote source group
- remote port mirroring source group reflector port, Configuring the reflector port for a remote source group
- remote port mirroring source group remote probe VLAN, Configuring the remote probe VLAN for a remote source group
- remote port mirroring source group source CPU, Configuring source CPUs for a remote source group
- remote port mirroring source group source ports, Configuring source ports for a remote source group
- RMON, Configuring RMON
- RMON alarm, Configuring the RMON alarm function, Alarm function configuration example
- RMON Ethernet statistics group, Ethernet statistics group configuration example
- RMON history group, History group configuration example
- RMON statistics, Configuring the RMON statistics function
- sFlow, Configuring sFlow, sFlow configuration task list, sFlow configuration example
- sFlow agent+collector information, Configuring the sFlow agent and sFlow collector information
- sFlow counter sampling, Configuring counter sampling
- sFlow flow sampling, Configuring flow sampling
- shutting down Chef, Shutting down Chef
- shutting down Puppet, Shutting down Puppet on the device
- SNMP, Configuring SNMP
- SNMP basics, Configuring SNMP basic parameters
- SNMP logging, Configuring SNMP logging
- SNMP notification, Configuring SNMP notifications
- SNMPv1, SNMPv1/SNMPv2c configuration example
- SNMPv1 basics, Configuring SNMPv1 or SNMPv2c basic parameters
- SNMPv1 notification send parameters, Configuring the SNMP agent to send notifications to a host
- SNMPv2c, SNMPv1/SNMPv2c configuration example
- SNMPv2c basics, Configuring SNMPv1 or SNMPv2c basic parameters
- SNMPv2c notification send parameters, Configuring the SNMP agent to send notifications to a host
- SNMPv3 basics, Configuring SNMPv3 basic parameters
- SNMPv3 notification send parameters, Configuring the SNMP agent to send notifications to a host
- SNTP, Configuration task list, Configuring SNTP, Configuration task list, SNTP configuration example
- SNTP authentication, Configuring SNTP authentication
- starting up Chef, Starting Chef
- starting up Puppet, Starting Puppet
- VCF fabric, VCF fabric configuration task list
- workstation, Configuring a workstation
- connecting
- CWMP ACS connection initiation, Scheduling a connection initiation
- CWMP ACS connection retry max number, Setting the maximum number of connection retries
- CWMP CPE ACS connection interface, Configuring the CWMP connection interface
- console
- information center log output, Outputting logs to the console
- information center log output configuration, Configuration example for outputting logs to the console
- content
- packet file content display, Displaying the contents in a packet file
- control plane
- flow mirroring QoS policy application, Applying a QoS policy to the control plane
- controlling
- NTP access control rights, Configuring access control rights
- RMON history control entry, Creating an RMON history control entry
- CPE
- CWMP ACS-CPE autoconnect, Autoconnect between ACS and CPE
- CPE WAN Management Protocol. Use
- CPU
- flow mirroring configuration, Configuring flow mirroring, Flow mirroring configuration task list, Flow mirroring configuration example
- Layer 3 remote port mirroring local group source CPU, Configuring source CPUs for a local mirroring group
- local port mirroring (source CPU mode), Local port mirroring configuration example (in source CPU mode)
- creating
- Event MIB event, Creating an event
- local port mirroring group, Creating a local mirroring group
- port mirroring remote destination group, Creating a remote destination group
- port mirroring remote source group, Creating a remote source group
- RMON Ethernet statistics entry, Creating an RMON Ethernet statistics entry
- RMON history control entry, Creating an RMON history control entry
- customer premise equipment (CPE)
- attribute type, Configuring CPE attributes
- CWMP, CWMP network framework
- CWMP ACS authentication parameters, Configuring ACS authentication parameters
- CWMP ACS autoconnect parameters, Configuring autoconnect parameters
- CWMP ACS connection interface, Configuring the CWMP connection interface
- CWMP ACS provision code, Configuring the provision code
- NAT traversal, Enabling NAT traversal for the CPE
- CWMP
- ACS attribute (default)(CLI), Configuring the default ACS attributes from the CLI
- ACS attribute (preferred), Configuring the preferred ACS attributes
- ACS attribute configuration, Configuring ACS attributes
- ACS autoconnect parameters, Configuring autoconnect parameters
- ACS HTTPS SSL client policy, Specifying an SSL client policy for HTTPS connection to ACS
- ACS-CPE autoconnect, Autoconnect between ACS and CPE
- autoconfiguration server (ACS), CWMP network framework
- basic functions, Basic CWMP functions
- configuration, Configuring CWMP, Configuration task list, CWMP configuration example
- connection establishment, CWMP connection establishment
- CPE ACS authentication parameters, Configuring ACS authentication parameters
- CPE ACS connection interface, Configuring the CWMP connection interface
- CPE ACS provision code, Configuring the provision code
- CPE attribute configuration, Configuring CPE attributes
- CPE NAT traversal, Enabling NAT traversal for the CPE
- customer premise equpment (CPE), CWMP network framework
- DHCP server, CWMP network framework
- DNS server, CWMP network framework
- enable, Enabling CWMP from the CLI
- how it works, How CWMP works
- network framework, CWMP network framework
- RPC methods, RPC methods
- settings display, Displaying and maintaining CWMP
D
- data
- feature image-based packet capture data display filter, Filtering packet data to display
- NETCONF configuration data retrieval (all modules), All-module configuration data retrieval example
- NETCONF configuration data retrieval (Syslog module), Syslog configuration data retrieval example
- NETCONF data entry retrieval (interface table), Example for retrieving a data entry for the interface table
- NETCONF filtering (column-based), Column-based filtering
- NETCONF filtering (column-based) (conditional match), Conditional match filtering
- NETCONF filtering (column-based) (full match), Full match filtering
- NETCONF filtering (column-based) (regex match), Regular expression match filtering
- NETCONF filtering (conditional match), Example for filtering data by conditional match
- NETCONF filtering (regex match), Example for filtering data with regular expression match
- NETCONF filtering (table-based), Table-based filtering
- packet capture filtered data display, Filtering packet data to display configuration example
- deadloop detection (Linux kernel PMM), Configuring kernel thread deadloop detection
- debugging
- feature module, Debugging a feature module
- system, System debugging
- system maintenance, Using ping, tracert, and system debugging
- default
- information center log default output rules, Default output rules for logs
- system information default output rules (diagnostic log), Default output rules for diagnostic logs
- system information default output rules (hidden log), Default output rules for hidden logs
- system information default output rules (security log), Default output rules for security logs
- system information default output rules (trace log), Default output rules for trace logs
- destination
- information center system logs, Log destinations
- port mirroring, Mirroring destination
- port mirroring destination device, Destination device
- detecting
- PMM kernel thread deadloop detection, Configuring kernel thread deadloop detection
- PMM kernel thread starvation detection, Configuring kernel thread starvation detection
- determining
- ping address reachability, Ping example
- device
- Chef configuration, Configuring Chef, Configuring Chef, Chef configuration example
- Chef configuration file, Chef configuration file
- Chef resources, Chef resources, Chef resources
- CWMP configuration, Configuring CWMP, Configuration task list, CWMP configuration example
- feature image-based packet capture configuration, Configuring feature image-based packet capture
- feature image-based packet capture file save, Saving captured packets to a file
- information center configuration, Configuring the information center, Information center configuration task list, Information center configuration examples
- information center log output configuration (console), Configuration example for outputting logs to the console, Configuration example for outputting logs to the console
- information center log output configuration (Linux log host), Configuration example for outputting logs to a Linux log host
- information center log output configuration (UNIX log host), Configuration example for outputting logs to a UNIX log host
- information center system log types, Log types
- IPv6 NTP multicast association mode (on switch), IPv6 NTP multicast mode configuration example
- Layer 2 remote port mirroring (egress port), Layer 2 remote port mirroring with egress port configuration task list, Layer 2 remote port mirroring configuration example (with egress port)
- Layer 2 remote port mirroring (reflector port), Layer 2 remote port mirroring with reflector port configuration task list, Layer 2 remote port mirroring configuration example (reflector port)
- Layer 2 remote port mirroring configuration, Configuring Layer 2 remote port mirroring
- Layer 3 remote port mirroring configuration, Configuring Layer 3 remote port mirroring, Layer 3 remote port mirroring configuration example
- Layer 3 remote port mirroring local group, Configuring local mirroring groups
- Layer 3 remote port mirroring local group monitor port, Configuring the monitor port for a local mirroring group
- Layer 3 remote port mirroring local group source CPU, Configuring source CPUs for a local mirroring group
- Layer 3 remote port mirroring local group source port, Configuring source ports for a local mirroring group
- local packet capture configuration, Configuring local packet capture
- local port mirroring (source CPU mode), Local port mirroring configuration example (in source CPU mode)
- local port mirroring (source port mode), Local port mirroring configuration example (in source port mode)
- local port mirroring configuration, Configuring local port mirroring
- local port mirroring group monitor port, Configuring the monitor port for the local mirroring group
- local port mirroring group source CPU, Configuring source CPUs for the local mirroring group
- NETCONF capability exchange, Exchanging capabilities
- NETCONF CLI operations, Performing CLI operations through NETCONF, CLI operation example
- NETCONF configuration, Configuring NETCONF, NETCONF configuration task list
- NETCONF configuration lock/unlock, Locking/unlocking the configuration, Example for locking the configuration
- NETCONF device management, How to use NETCONF
- NETCONF edit-config operation, Performing the <edit-config> operation
- NETCONF get/get-bulk operation, Performing the <get>/<get-bulk> operation
- NETCONF get-config/get-bulk-config operation, Performing the <get-config>/<get-bulk-config> operation
- NETCONF information retrieval, Retrieving NETCONF information
- NETCONF save-point/begin operation, Performing the <save-point/begin> operation
- NETCONF save-point/commit operation, Performing the <save-point/commit> operation
- NETCONF save-point/end operation, Performing the <save-point/end> operation
- NETCONF save-point/get-commit-information operation, Performing the <save-point/get-commit-information> operation
- NETCONF save-point/get-commits operation, Performing the <save-point/get-commits> operation
- NETCONF save-point/rollback operation, Performing the <save-point/rollback> operation
- NETCONF service operations, Performing service operations
- NETCONF session information retrieval, Retrieving NETCONF session information
- NETCONF session termination, Terminating another NETCONF session
- NETCONF YANG file content retrieval, Retrieving YANG file content
- NQA client operation, Configuring NQA operations on the NQA client
- NQA collaboration configuration (on switch), NQA collaboration configuration example
- NQA operation configuration (DHCP)(on switch), DHCP operation configuration example
- NQA operation configuration (DNS), DNS operation configuration example
- NQA server, Configuring the NQA server
- NTP architecture, NTP architecture
- NTP broadcast association mode (on switch), NTP broadcast mode configuration example
- NTP broadcast mode+authentication (on switch), Configuration example for NTP broadcast mode with authentication
- NTP multicast association mode (on switch), NTP multicast mode configuration example
- packet capture configuration (remote), Remote packet capture configuration example
- packet capture filtered data display, Filtering packet data to display configuration example
- port mirroring configuration, Configuring port mirroring, Port mirroring configuration examples
- port mirroring remote destination group, Configuring a remote destination group on the destination device
- port mirroring remote source group, Configuring a remote source group on the source device
- port mirroring remote source group egress port, Configuring the egress port for a remote source group
- port mirroring remote source group reflector port, Configuring the reflector port for a remote source group
- port mirroring remote source group remote probe VLAN, Configuring the remote probe VLAN for a remote source group
- port mirroring remote source group source CPU, Configuring source CPUs for a remote source group
- port mirroring remote source group source ports, Configuring source ports for a remote source group
- port mirroring source device, Mirroring destination
- Puppet configuration, Configuring Puppet, Configuring Puppet, Puppet configuration example
- Puppet resources, Puppet resources, Puppet resources
- remote packet capture configuration, Configuring remote packet capture
- SNMP basics configuration, Configuring SNMP basic parameters
- SNMP configuration, Configuring SNMP
- SNMP MIB, MIB and view-based MIB access control
- SNMP notification, Configuring SNMP notifications
- SNMP view-based MIB access control, MIB and view-based MIB access control
- SNMPv1 basics configuration, Configuring SNMPv1 or SNMPv2c basic parameters
- SNMPv1 configuration, SNMPv1/SNMPv2c configuration example
- SNMPv2c basics configuration, Configuring SNMPv1 or SNMPv2c basic parameters
- SNMPv2c configuration, SNMPv1/SNMPv2c configuration example
- SNMPv3 basics configuration, Configuring SNMPv3 basic parameters
- DHCP
- CWMP DHCP server, CWMP network framework
- NQA client operation, Configuring the DHCP operation
- NQA operation configuration (on switch), DHCP operation configuration example
- diagnosing
- information center diagnostic log, Log types
- information center diagnostic log save (log file), Saving diagnostic logs to the diagnostic log file
- direction
- port mirroring (bidirectional), Mirroring direction
- port mirroring (inbound), Mirroring direction
- port mirroring (outbound), Mirroring direction
- disabling
- information center interface link up/link down log generation, Disabling an interface from generating link up or link down logs
- NTP message receiving, Disabling an interface from receiving NTP messages
- displaying
- CWMP settings, Displaying and maintaining CWMP
- EAA settings, Displaying and maintaining EAA settings
- Event MIB, Displaying and maintaining the Event MIB
- feature image-based packet capture data display filter, Filtering packet data to display
- information center, Displaying and maintaining information center
- NQA, Displaying and maintaining NQA
- NTP, Displaying and maintaining NTP
- packet capture, Displaying and maintaining packet capture
- packet capture display filter configuration, Building a display filter
- packet file content, Displaying the contents in a packet file
- PMM, Displaying and maintaining processes
- PMM kernel threads, Displaying and maintaining kernel threads
- port mirroring, Displaying and maintaining port mirroring
- RMON settings, Displaying and maintaining RMON settings
- sFlow, Displaying and maintaining sFlow
- SNMP settings, Displaying the SNMP settings
- SNTP, Displaying and maintaining SNTP
- user PMM, Displaying and maintaining user processes
- VCF fabric, Displaying and maintaining VCF fabric
- DLSw
- NQA client operation, Configuring the DLSw operation
- NQA operation configuration, DLSw operation configuration example
- DNS
- CWMP DNS server, CWMP network framework
- NQA client operation, Configuring the DNS operation
- NQA client template, Configuring the DNS template
- NQA operation configuration, DNS operation configuration example
- NQA template configuration, DNS template configuration example
- domain
- name system. Use
- DSCP
- NTP packet value setting, Setting a DSCP value for NTP packets
- DSL network
- CWMP configuration, Configuring CWMP, Configuration task list
- duplicate log suppression, Enabling duplicate log suppression
- dynamic
- NTP dynamic associations max, Configuring the maximum number of dynamic associations
- Dynamic Host Configuration Protocol. Use
E
- EAA
- configuration, Configuring EAA, EAA configuration examples
- environment variable configuration (user-defined), Configuring a user-defined EAA environment variable
- event monitor, Event monitors
- event monitor policy action, Action
- event monitor policy configuration (CLI), CLI event monitor policy configuration example
- event monitor policy configuration (Track), Track event monitor policy configuration example
- event monitor policy element, Elements in a monitor policy
- event monitor policy environment variable, EAA environment variables
- event monitor policy runtime, Runtime
- event monitor policy user role, User role
- event source, Event sources
- how it works, EAA framework
- monitor policy, EAA monitor policies
- monitor policy configuration, Configuring a monitor policy
- monitor policy configuration (CLI), Configuring a monitor policy from the CLI
- monitor policy configuration (CLI-defined+environment variables), CLI-defined policy with EAA environment variables configuration example
- monitor policy configuration (Tcl), Configuring a monitor policy by using Tcl
- monitor policy configuration (Tcl-defined), Tcl-defined policy configuration example
- monitor policy configuration restrictions, Configuration restrictions and guidelines
- monitor policy suspension, Suspending monitor policies
- RTM, RTM
- settings display, Displaying and maintaining EAA settings
- echo
- NQA client operation (ICMP echo), Configuring the ICMP echo operation
- NQA operation configuration (ICMP echo), ICMP echo operation configuration example
- egress port
- Layer 2 remote port mirroring, Reflector port, egress port, and remote probe VLAN, Layer 2 remote port mirroring with egress port configuration task list
- Layer 2 remote port mirroring (egress port), Layer 2 remote port mirroring configuration example (with egress port)
- port mirroring remote source group egress port, Configuring the egress port for a remote source group
- Embedded Automation Architecture. Use
- enabling
- CWMP, Enabling CWMP from the CLI
- Event MIB SNMP notification, Enabling SNMP notifications for Event MIB
- information center duplicate log suppression, Enabling duplicate log suppression
- information center synchronous output, Enabling synchronous information output
- information center system log SNMP notification, Enabling SNMP notifications for system logs
- NETCONF logging, Enabling NETCONF logging
- NETCONF over SSH, Enabling NETCONF over SSH
- NQA client, Enabling the NQA client
- NTP, Enabling the NTP service
- SNMP notification, Enabling SNMP notifications
- SNTP, Enabling the SNTP service
- VCF fabric topology discovery, Enabling VCF fabric topology discovery
- entering
- NETCONF XML view, Entering XML view
- environment
- EAA environment variable configuration (user-defined), Configuring a user-defined EAA environment variable
- EAA event monitor policy environment variable, EAA environment variables
- establishing
- NETCONF session, Establishing a NETCONF session
- Ethernet
- Chef configuration, Configuring Chef, Configuring Chef, Chef configuration example
- Chef resources, Chef resources
- CWMP configuration, Configuring CWMP, Configuration task list, CWMP configuration example
- Layer 2 remote port mirroring configuration, Configuring Layer 2 remote port mirroring
- Layer 3 remote port mirroring configuration, Configuring Layer 3 remote port mirroring
- port mirroring configuration, Configuring port mirroring, Port mirroring configuration examples
- Puppet configuration, Configuring Puppet, Configuring Puppet, Puppet configuration example
- Puppet resources, Puppet resources
- RMON Ethernet statistics entry, Creating an RMON Ethernet statistics entry
- RMON Ethernet statistics group configuration, Ethernet statistics group configuration example
- RMON statistics configuration, Configuring the RMON statistics function
- RMON statistics group, Statistics group
- sFlow configuration, Configuring sFlow, sFlow configuration task list, sFlow configuration example
- event
- EAA configuration, Configuring EAA, EAA configuration examples
- EAA environment variable configuration (user-defined), Configuring a user-defined EAA environment variable
- EAA event monitor, Event monitors
- EAA event monitor policy element, Elements in a monitor policy
- EAA event monitor policy environment variable, EAA environment variables
- EAA event source, Event sources
- EAA monitor policy, EAA monitor policies
- NETCONF event notification subscription, Subscribing to event notifications, Example for subscribing to event notifications
- NETCONF module report event subscription, Subscribing to module report events
- NETCONF monitoring event subscription, Subscribing to monitoring events
- NETCONF syslog event subscription, Subscribing to syslog events
- RMON event group, Event group
- Event Management Information Base. See
- Event MIB
- configuration, Configuring the Event MIB, Event MIB configuration task list
- display, Displaying and maintaining the Event MIB
- event actions, Event actions
- event creation, Creating an event
- monitored object, Monitored objects
- notification action configuration, Configuring a notification action for an event
- object list, Configuring Event MIB object lists
- object owner, Object owner
- sampling configuration, Configuring Event MIB sampling
- set action configuration, Configuring a set action for an event
- SNMP notification enable, Enabling SNMP notifications for Event MIB
- trigger test, Trigger test
- trigger test configuration, Configuring a trigger
- trigger test configuration (Boolean), Configuring a Boolean trigger test, Boolean trigger test configuration example
- trigger test configuration (existence), Configuring an existence trigger test, Existence trigger test configuration example
- trigger test configuration (threshold), Configuring a threshold trigger test, Threshold trigger test configuration example
- exchanging
- NETCONF capabilities, Exchanging capabilities
- existence
- Event MIB trigger test, Existence test
- Event MIB trigger test configuration, Configuring an existence trigger test, Existence trigger test configuration example
F
- field
- packet capture display filter keyword, Display filter keywords
- file
- information center diagnostic log output destination, Saving diagnostic logs to the diagnostic log file
- information center log save (log file), Saving logs to the log file
- information center security log file management, Managing the security log file
- information center security log save (log file), Saving security logs to the security log file
- NETCONF YANG file content retrieval, Retrieving YANG file content
- packet capture file save, Saving captured packets to a file configuration example
- packet file content display, Displaying the contents in a packet file
- filtering
- column-based filtering, Filtering data
- feature image-based packet capture data display, Filtering packet data to display
- NETCONF data (conditional match), Example for filtering data by conditional match
- NETCONF data (regex match), Example for filtering data with regular expression match
- NETCONF data filtering (column-based), Column-based filtering
- NETCONF data filtering (table-based), Table-based filtering
- packet capture display filter configuration, Building a display filter
- packet capture filter configuration, Building a capture filter
- table-based filtering, Filtering data
- FIPS compliance
- information center, FIPS compliance
- NETCONF, FIPS compliance
- SNMP, FIPS compliance
- flow
- mirroring. See
- Sampled Flow. Use
- sFlow configuration, sFlow configuration task list
- flow mirroring
- configuration, Configuring flow mirroring, Flow mirroring configuration task list, Flow mirroring configuration example
- match criteria configuration, Configuring match criteria
- QoS policy application, Applying a QoS policy
- QoS policy application (control plane), Applying a QoS policy to the control plane
- QoS policy application (global), Applying a QoS policy globally
- QoS policy application (interface), Applying a QoS policy to an interface
- QoS policy application (VLAN), Applying a QoS policy to a VLAN
- QoS policy configuration, Configuring a QoS policy
- traffic behavior configuration, Configuring a traffic behavior
- format
- information center system logs, Log formats
- NETCONF message, NETCONF message format
- FTP
- NQA client operation, Configuring the FTP operation
- NQA client template, Configuring the FTP template
- NQA operation configuration, FTP operation configuration example
- NQA template configuration, FTP template configuration example
- full match
- NETCONF data filtering (column-based), Full match filtering
G
- generating
- information center interface link up/link down log generation, Disabling an interface from generating link up or link down logs
- get operation
- NETCONF get/get-bulk, Performing the <get>/<get-bulk> operation
- NETCONF get-config/get-bulk-config, Performing the <get-config>/<get-bulk-config> operation
- SNMP, SNMP operations
- SNMP logging, Configuring SNMP logging
- group
- Layer 3 remote port mirroring local group, Configuring local mirroring groups
- Layer 3 remote port mirroring local group monitor port, Configuring the monitor port for a local mirroring group
- Layer 3 remote port mirroring local group source port, Configuring source ports for a local mirroring group
- local port mirroring group monitor port, Configuring the monitor port for the local mirroring group
- local port mirroring group source CPU, Configuring source CPUs for the local mirroring group
- local port mirroring group source port, Configuring source ports for the local mirroring group
- port mirroring group, Mirroring group
- RMON, RMON groups
- RMON alarm, Alarm group
- RMON Ethernet statistics, Statistics group
- RMON event, Event group
- RMON history, History group
- RMON private alarm, Private alarm group
- guidelines
- VCF fabric configuraiton, Configuration restrictions and guidelines
H
- hidden log (information center), Log types
- history
- NQA client history record save, Configuring the saving of NQA history records
- RMON group, History group
- RMON history control entry, Creating an RMON history control entry
- RMON history group configuration, History group configuration example
- host
- information center log output (log host), Outputting logs to log hosts
- HTTP
- NETCONF over SOAP (HTTP-based), Configuring NETCONF over SOAP
- NQA client operation, Configuring the HTTP operation
- NQA client template, Configuring the HTTP template
- NQA operation configuration, HTTP operation configuration example
- NQA template configuration, HTTP template configuration example
- HTTPS
- CWMP ACS HTTPS SSL client policy, Specifying an SSL client policy for HTTPS connection to ACS
- NETCONF over SOAP (HTTPS-based), Configuring NETCONF over SOAP
- NQA client template, Configuring the HTTPS template
- NQA template configuration, HTTPS template configuration example
I
- ICMP
- NQA client operation (ICMP echo), Configuring the ICMP echo operation
- NQA client operation (ICMP jitter), Configuring the ICMP jitter operation
- NQA client template, Configuring the ICMP template
- NQA collaboration configuration (on switch), NQA collaboration configuration example
- NQA operation configuration (ICMP echo), ICMP echo operation configuration example
- NQA operation configuration (ICMP jitter), ICMP jitter operation configuration example
- NQA template configuration, ICMP template configuration example
- ping command, Ping
- identifying
- tracert node failure, Using a tracert command to identify failed or all nodes in a path, Tracert example
- image
- packet capture feature image-based configuration, Configuring feature image-based packet capture
- packet capture feature image-based mode, Packet capture modes
- implementing
- local port mirroring, Local port mirroring
- port mirroring, Port mirroring classification and implementation
- remote port mirroring, Remote port mirroring
- inbound
- port mirroring, Mirroring direction
- information center
- configuration, Configuring the information center, Information center configuration task list, Information center configuration examples
- default output rules (diagnostic log), Default output rules for diagnostic logs
- default output rules (hidden log), Default output rules for hidden logs
- default output rules (security log), Default output rules for security logs
- default output rules (trace log), Default output rules for trace logs
- diagnostic log save (log file), Saving diagnostic logs to the diagnostic log file
- display, Displaying and maintaining information center
- duplicate log suppression, Enabling duplicate log suppression
- FIPS compliance, FIPS compliance
- interface link up/link down log generation, Disabling an interface from generating link up or link down logs
- log default output rules, Default output rules for logs
- log output (console), Outputting logs to the console
- log output (log buffer), Outputting logs to the log buffer
- log output (log host), Outputting logs to log hosts
- log output (monitor terminal), Outputting logs to the monitor terminal
- log output configuration (console), Configuration example for outputting logs to the console
- log output configuration (Linux log host), Configuration example for outputting logs to a Linux log host
- log output configuration (UNIX log host), Configuration example for outputting logs to a UNIX log host
- log save (log file), Saving logs to the log file
- log storage period, Setting the minimum storage period for logs
- log suppression, Configuring log suppression for a module
- maintain, Displaying and maintaining information center
- security log file management, Managing the security log file
- security log management, Managing security logs
- security log save (log file), Saving security logs to the security log file
- synchronous log output, Enabling synchronous information output
- system information log types, Log types
- system log destinations, Log destinations
- system log formats, Log formats
- system log levels, Log levels
- system log SNMP notification, Enabling SNMP notifications for system logs
- trace log file max size, Configuring the maximum size of the trace log file
- initiating
- CWMP ACS connection initiation, Scheduling a connection initiation
- Internet
- NQA configuration, Configuring NQA, NQA configuration task list, NQA configuration examples
- SNMP basics configuration, Configuring SNMP basic parameters
- SNMP configuration, Configuring SNMP
- SNMP MIB, MIB and view-based MIB access control
- SNMPv1 basics configuration, Configuring SNMPv1 or SNMPv2c basic parameters
- SNMPv2c basics configuration, Configuring SNMPv1 or SNMPv2c basic parameters
- SNMPv3 basics configuration, Configuring SNMPv3 basic parameters
- interval
- CWMP ACS periodic Inform feature, Configuring the periodic Inform feature
- IP addressing
- tracert, Tracert
- tracert node failure identification, Using a tracert command to identify failed or all nodes in a path, Tracert example
- IP services
- NQA client history record save, Configuring the saving of NQA history records
- NQA client operation (DHCP), Configuring the DHCP operation
- NQA client operation (DLSw), Configuring the DLSw operation
- NQA client operation (DNS), Configuring the DNS operation
- NQA client operation (FTP), Configuring the FTP operation
- NQA client operation (HTTP), Configuring the HTTP operation
- NQA client operation (ICMP echo), Configuring the ICMP echo operation
- NQA client operation (ICMP jitter), Configuring the ICMP jitter operation
- NQA client operation (path jitter), Configuring the path jitter operation
- NQA client operation (SNMP), Configuring the SNMP operation
- NQA client operation (TCP), Configuring the TCP operation
- NQA client operation (UDP echo), Configuring the UDP echo operation
- NQA client operation (UDP jitter), Configuring the UDP jitter operation
- NQA client operation (UDP tracert), Configuring the UDP tracert operation
- NQA client operation (voice), Configuring the voice operation
- NQA client operation optional parameters, Configuring optional parameters for the NQA operation
- NQA client operation scheduling, Scheduling the NQA operation on the NQA client
- NQA client statistics collection, Configuring the NQA statistics collection feature
- NQA client template (DNS), Configuring the DNS template
- NQA client template (FTP), Configuring the FTP template
- NQA client template (HTTP), Configuring the HTTP template
- NQA client template (HTTPS), Configuring the HTTPS template
- NQA client template (ICMP), Configuring the ICMP template
- NQA client template (RADIUS), Configuring the RADIUS template
- NQA client template (SSL), Configuring the SSL template
- NQA client template (TCP half open), Configuring the TCP half open template
- NQA client template (TCP), Configuring the TCP template
- NQA client template (UDP), Configuring the UDP template
- NQA client template optional parameters, Configuring optional parameters for the NQA template
- NQA client threshold monitoring, Configuring threshold monitoring
- NQA client+Track collaboration, Configuring the collaboration feature
- NQA collaboration configuration (on switch), NQA collaboration configuration example
- NQA configuration, Configuring NQA, NQA configuration task list, NQA configuration examples
- NQA operation configuration (DHCP)(on switch), DHCP operation configuration example
- NQA operation configuration (DLSw), DLSw operation configuration example
- NQA operation configuration (DNS), DNS operation configuration example
- NQA operation configuration (FTP), FTP operation configuration example
- NQA operation configuration (HTTP), HTTP operation configuration example
- NQA operation configuration (ICMP echo), ICMP echo operation configuration example
- NQA operation configuration (ICMP jitter), ICMP jitter operation configuration example
- NQA operation configuration (path jitter), Path jitter operation configuration example
- NQA operation configuration (SNMP), SNMP operation configuration example
- NQA operation configuration (TCP), TCP operation configuration example
- NQA operation configuration (UDP echo), UDP echo operation configuration example
- NQA operation configuration (UDP jitter), UDP jitter operation configuration example
- NQA operation configuration (UDP tracert), UDP tracert operation configuration example
- NQA operation configuration (voice), Voice operation configuration example
- NQA template configuration (DNS), DNS template configuration example
- NQA template configuration (FTP), FTP template configuration example
- NQA template configuration (HTTP), HTTP template configuration example
- NQA template configuration (HTTPS), HTTPS template configuration example
- NQA template configuration (ICMP), ICMP template configuration example
- NQA template configuration (RADIUS), RADIUS template configuration example
- NQA template configuration (SSL), SSL template configuration example
- NQA template configuration (TCP half open), TCP half open template configuration example
- NQA template configuration (TCP), TCP template configuration example
- NQA template configuration (UDP), UDP template configuration example
- IPv6
- NTP client/server association mode, IPv6 NTP client/server mode configuration example
- NTP multicast association mode (on switch), IPv6 NTP multicast mode configuration example
- NTP symmetric active/passive association mode, IPv6 NTP symmetric active/passive mode configuration example
- IT infrasturcture
- VCF fabric overview, Configuring VCF fabric
L
- Layer 2
- port mirroring configuration, Configuring port mirroring, Port mirroring configuration examples
- remote port mirroring (egress port), Layer 2 remote port mirroring with egress port configuration task list, Layer 2 remote port mirroring configuration example (with egress port)
- remote port mirroring (reflector port), Layer 2 remote port mirroring with reflector port configuration task list, Layer 2 remote port mirroring configuration example (reflector port)
- remote port mirroring configuration, Configuring Layer 2 remote port mirroring
- Layer 3
- port mirroring configuration, Configuring port mirroring, Port mirroring configuration examples
- remote port mirroring configuration, Configuring Layer 3 remote port mirroring, Layer 3 remote port mirroring configuration example
- tracert, Tracert
- tracert node failure identification, Using a tracert command to identify failed or all nodes in a path, Tracert example
- level
- information center system logs, Log levels
- link
- information center interface link up/link down log generation, Disabling an interface from generating link up or link down logs
- Linux
- information center log host output configuration, Configuration example for outputting logs to a Linux log host
- kernel thread, Monitoring and maintaining processes
- PMM, Monitoring and maintaining processes
- PMM kernel thread, Monitoring kernel threads
- PMM kernel thread deadloop detection, Configuring kernel thread deadloop detection
- PMM kernel thread display, Displaying and maintaining kernel threads
- PMM kernel thread maintain, Displaying and maintaining kernel threads
- PMM kernel thread starvation detection, Configuring kernel thread starvation detection
- list
- Event MIB object list configuration, Configuring Event MIB object lists
- loading
- NETCONF configuration, Saving, rolling back, and loading the configuration, Loading the configuration
- local
- NTP local clock as reference source, Configuring the local clock as a reference source
- packet capture configuration, Configuring local packet capture
- packet capture mode, Packet capture modes
- port mirroring, Local port mirroring
- port mirroring configuration, Configuring local port mirroring
- port mirroring group creation, Creating a local mirroring group
- port mirroring group monitor port, Configuring the monitor port for the local mirroring group
- port mirroring group source CPU, Configuring source CPUs for the local mirroring group
- port mirroring group source port, Configuring source ports for the local mirroring group
- locking
- NETCONF configuration, Locking/unlocking the configuration, Example for locking the configuration
- log suppression, Configuring log suppression for a module
- logging
- information center common logs, Log types
- information center configuration, Configuring the information center, Information center configuration task list, Information center configuration examples
- information center diagnostic log save (log file), Saving diagnostic logs to the diagnostic log file
- information center diagnostic logs, Log types
- information center duplicate log suppression, Enabling duplicate log suppression
- information center hidden logs, Log types
- information center interface link up/link down log generation, Disabling an interface from generating link up or link down logs
- information center log default output rules, Default output rules for logs
- information center log output (console), Outputting logs to the console
- information center log output (log buffer), Outputting logs to the log buffer
- information center log output (log host), Outputting logs to log hosts
- information center log output (monitor terminal), Outputting logs to the monitor terminal
- information center log output configuration (console), Configuration example for outputting logs to the console
- information center log output configuration (Linux log host), Configuration example for outputting logs to a Linux log host
- information center log output configuration (UNIX log host), Configuration example for outputting logs to a UNIX log host
- information center log save (log file), Saving logs to the log file
- information center log storage period, Setting the minimum storage period for logs
- information center log suppression, Configuring log suppression for a module
- information center security log file management, Managing the security log file
- information center security log management, Managing security logs
- information center security log save (log file), Saving security logs to the security log file
- information center security logs, Log types
- information center synchronous log output, Enabling synchronous information output
- information center system log destinations, Log destinations
- information center system log formats, Log formats
- information center system log levels, Log levels
- information center system log SNMP notification, Enabling SNMP notifications for system logs
- information center trace log file max size, Configuring the maximum size of the trace log file
- NETCONF logging enable, Enabling NETCONF logging
- SNMP configuration, Configuring SNMP logging
- system information default output rules (diagnostic log), Default output rules for diagnostic logs
- system information default output rules (hidden log), Default output rules for hidden logs
- system information default output rules (security log), Default output rules for security logs
- system information default output rules (trace log), Default output rules for trace logs
- logical
- packet capture display filter configuration (logical expression), Logical expression
- packet capture display filter operator, Display filter operators
- packet capture filter configuration (logical expression), Logical expression
- packet capture filter operator, Capture filter operators
- packet capture operator, Filter elements
M
- maintaining
- information center, Displaying and maintaining information center
- PMM, Displaying and maintaining processes
- PMM kernel threads, Displaying and maintaining kernel threads
- PMM Linux, Monitoring and maintaining processes
- process monitoring and maintenance. See
- user PMM, Displaying and maintaining user processes
- VCF fabric, Displaying and maintaining VCF fabric
- Management Information Base. Use
- managing
- information center security log file, Managing the security log file
- information center security logs, Managing security logs
- NETCONF device management, How to use NETCONF
- master
- Puppet, Puppet master
- matching
- flow mirroring match criteria, Configuring match criteria
- NETCONF data filtering (column-based), Column-based filtering
- NETCONF data filtering (column-based) (conditional match), Conditional match filtering
- NETCONF data filtering (column-based) (full match), Full match filtering
- NETCONF data filtering (column-based) (regex match), Regular expression match filtering
- NETCONF data filtering (conditional match), Example for filtering data by conditional match
- NETCONF data filtering (regex match), Example for filtering data with regular expression match
- NETCONF data filtering (table-based), Table-based filtering
- packet capture display filter configuration (proto[…] expression), The proto[…] expression
- message
- NETCONF format, NETCONF message format
- NTP message receiving disable, Disabling an interface from receiving NTP messages
- NTP message source interface, Specifying the source interface for NTP messages
- MIB
- Event MIB configuration, Configuring the Event MIB, Event MIB configuration task list
- Event MIB event actions, Event actions
- Event MIB monitored object, Monitored objects
- Event MIB object list configuration, Configuring Event MIB object lists
- Event MIB object owner, Object owner
- Event MIB sampling configuration, Configuring Event MIB sampling
- Event MIB trigger test, Trigger test
- Event MIB trigger test configuration, Configuring a trigger
- Event MIB trigger test configuration (Boolean), Configuring a Boolean trigger test, Boolean trigger test configuration example
- Event MIB trigger test configuration (existence), Configuring an existence trigger test, Existence trigger test configuration example
- Event MIB trigger test configuration (threshold), Configuring a threshold trigger test, Threshold trigger test configuration example
- SNMP, SNMP framework, MIB and view-based MIB access control
- SNMP Get operation, SNMP operations
- SNMP Set operation, SNMP operations
- SNMP view-based access control, MIB and view-based MIB access control
- mirroring
- flow. See
- port. See
- mode
- NTP association, Configuring NTP association mode
- NTP broadcast association, Association modes, Configuring NTP in broadcast mode
- NTP client/server association, Association modes, Configuring NTP in client/server mode
- NTP multicast association, Association modes, Configuring NTP in multicast mode
- NTP symmetric active/passive association, Association modes, Configuring NTP in symmetric active/passive mode
- packet capture feature image-based, Packet capture modes
- packet capture local, Packet capture modes
- packet capture remote, Packet capture modes
- SNMP access control (rule-based), Access control modes
- SNMP access control (view-based), Access control modes
- module
- feature module debug, Debugging a feature module
- information center configuration, Configuring the information center, Information center configuration task list, Information center configuration examples
- NETCONF configuration data retrieval (all modules), All-module configuration data retrieval example
- NETCONF configuration data retrieval (Syslog module), Syslog configuration data retrieval example
- NETCONF data entry retrieval (interface table), Example for retrieving a data entry for the interface table
- NETCONF module report event subscription, Subscribing to module report events
- monitor terminal
- information center log output, Outputting logs to the monitor terminal
- monitoring
- EAA configuration, Configuring EAA
- EAA environment variable configuration (user-defined), Configuring a user-defined EAA environment variable
- EAA monitor policy configuration (CLI), Configuring a monitor policy from the CLI
- Event MIB configuration, Configuring the Event MIB, Event MIB configuration task list
- Event MIB trigger test configuration (Boolean), Boolean trigger test configuration example
- Event MIB trigger test configuration (existence), Existence trigger test configuration example
- Event MIB trigger test configuration (threshold), Threshold trigger test configuration example
- NETCONF monitoring event subscription, Subscribing to monitoring events
- NQA client threshold monitoring, Configuring threshold monitoring
- NQA threshold monitoring, Threshold monitoring
- PMM kernel thread, Monitoring kernel threads
- PMM Linux, Monitoring and maintaining processes
- process monitoring and maintenance. See
- multicast
- IPv6 NTP multicast association mode (on switch), IPv6 NTP multicast mode configuration example
- NTP multicast association mode, Association modes, Configuring NTP in multicast mode
- NTP multicast association mode (on switch), NTP multicast mode configuration example
- NTP multicast client configuration, Configuring a multicast client
- NTP multicast mode authentication, Configuring NTP authentication in multicast mode
- NTP multicast mode dynamic associations max, Configuring the maximum number of dynamic associations
- NTP multicast server configuration, Configuring the multicast server
N
- NAT
- CWMP CPE NAT traversal, Enabling NAT traversal for the CPE
- NETCONF
- capability exchange, Exchanging capabilities
- CLI operations, Performing CLI operations through NETCONF, CLI operation example
- CLI return, Returning to the CLI
- configuration, Configuring NETCONF, NETCONF configuration task list
- configuration data retrieval (all modules), All-module configuration data retrieval example
- configuration data retrieval (Syslog module), Syslog configuration data retrieval example
- configuration load, Saving, rolling back, and loading the configuration, Loading the configuration
- configuration lock/unlock, Locking/unlocking the configuration, Example for locking the configuration
- configuration rollback, Saving, rolling back, and loading the configuration
- configuration rollback (configuration file-based), Rolling back the configuration based on a configuration file
- configuration rollback (rollback point-based), Rolling back the configuration based on a rollback point
- configuration save, Saving, rolling back, and loading the configuration, Saving the configuration, Example for saving the configuration
- data entry retrieval (interface table), Example for retrieving a data entry for the interface table
- data filtering, Filtering data
- data filtering (conditional match), Example for filtering data by conditional match
- data filtering (regex match), Example for filtering data with regular expression match
- device management, How to use NETCONF
- edit-config operation, Performing the <edit-config> operation
- event notification subscription, Subscribing to event notifications, Example for subscribing to event notifications
- FIPS compliance, FIPS compliance
- get/get-bulk operation, Performing the <get>/<get-bulk> operation
- get-config/get-bulk-config operation, Performing the <get-config>/<get-bulk-config> operation
- information retrieval, Retrieving NETCONF information
- message format, NETCONF message format
- module report event subscription, Subscribing to module report events
- monitoring event subscription, Subscribing to monitoring events
- NETCONF logging enable, Enabling NETCONF logging
- over SOAP, NETCONF message format
- over SOAP configuration, Configuring NETCONF over SOAP
- over SSH enable, Enabling NETCONF over SSH
- parameter value change, Example for changing the value of a parameter
- protocols and standards, Protocols and standards
- save-point/begin operation, Performing the <save-point/begin> operation
- save-point/commit operation, Performing the <save-point/commit> operation
- save-point/end operation, Performing the <save-point/end> operation
- save-point/get-commit-information operation, Performing the <save-point/get-commit-information> operation
- save-point/get-commits operation, Performing the <save-point/get-commits> operation
- save-point/rollback operation, Performing the <save-point/rollback> operation
- service operations, Performing service operations
- session establishment, Establishing a NETCONF session
- session idle timeout time set, Setting the NETCONF session idle timeout time
- session information retrieval, Retrieving NETCONF session information
- session termination, Terminating another NETCONF session
- structure, NETCONF structure
- supported operations, Appendix A Supported NETCONF operations
- syslog event subscription, Subscribing to syslog events
- XML view, Entering XML view
- YANG file content retrieval, Retrieving YANG file content
- netwokring
- automatd overlay network deployment, Automated overlay network deployment
- automatd underlay network provisioning, Automated underlay network provisioning
- VCF fabric topology discovery, Topology discovery
- network
- Event MIB SNMP notification enable, Enabling SNMP notifications for Event MIB
- Event MIB trigger test configuration (Boolean), Boolean trigger test configuration example
- Event MIB trigger test configuration (existence), Existence trigger test configuration example
- Event MIB trigger test configuration (threshold), Threshold trigger test configuration example
- feature module debug, Debugging a feature module
- flow mirroring configuration, Configuring flow mirroring, Flow mirroring configuration task list, Flow mirroring configuration example
- flow mirroring match criteria, Configuring match criteria
- flow mirroring traffic behavior, Configuring a traffic behavior
- information center diagnostic log save (log file), Saving diagnostic logs to the diagnostic log file
- information center duplicate log suppression, Enabling duplicate log suppression
- information center interface link up/link down log generation, Disabling an interface from generating link up or link down logs
- information center log output configuration (console), Configuration example for outputting logs to the console
- information center log output configuration (Linux log host), Configuration example for outputting logs to a Linux log host
- information center log output configuration (UNIX log host), Configuration example for outputting logs to a UNIX log host
- information center log storage period, Setting the minimum storage period for logs
- information center log suppression, Configuring log suppression for a module
- information center security log file management, Managing the security log file
- information center security log save (log file), Saving security logs to the security log file
- information center synchronous log output, Enabling synchronous information output
- information center system log SNMP notification, Enabling SNMP notifications for system logs
- information center system log types, Log types
- information center trace log file max size, Configuring the maximum size of the trace log file
- Layer 2 remote port mirroring (egress port), Layer 2 remote port mirroring with egress port configuration task list, Layer 2 remote port mirroring configuration example (with egress port)
- Layer 2 remote port mirroring (reflector port), Layer 2 remote port mirroring with reflector port configuration task list, Layer 2 remote port mirroring configuration example (reflector port)
- Layer 2 remote port mirroring configuration, Configuring Layer 2 remote port mirroring
- Layer 3 remote port mirroring configuration, Configuring Layer 3 remote port mirroring, Layer 3 remote port mirroring configuration example
- Layer 3 remote port mirroring local group, Configuring local mirroring groups
- Layer 3 remote port mirroring local group monitor port, Configuring the monitor port for a local mirroring group
- Layer 3 remote port mirroring local group source CPU, Configuring source CPUs for a local mirroring group
- Layer 3 remote port mirroring local group source port, Configuring source ports for a local mirroring group
- local port mirroring (source CPU mode), Local port mirroring configuration example (in source CPU mode)
- local port mirroring (source port mode), Local port mirroring configuration example (in source port mode)
- local port mirroring configuration, Configuring local port mirroring
- local port mirroring group monitor port, Configuring the monitor port for the local mirroring group
- local port mirroring group source CPU, Configuring source CPUs for the local mirroring group
- local port mirroring group source port, Configuring source ports for the local mirroring group
- Network Configuration Protocol. Use
- NQA client history record save, Configuring the saving of NQA history records
- NQA client operation, Configuring NQA operations on the NQA client
- NQA client operation (DHCP), Configuring the DHCP operation
- NQA client operation (DLSw), Configuring the DLSw operation
- NQA client operation (DNS), Configuring the DNS operation
- NQA client operation (FTP), Configuring the FTP operation
- NQA client operation (HTTP), Configuring the HTTP operation
- NQA client operation (ICMP echo), Configuring the ICMP echo operation
- NQA client operation (ICMP jitter), Configuring the ICMP jitter operation
- NQA client operation (path jitter), Configuring the path jitter operation
- NQA client operation (SNMP), Configuring the SNMP operation
- NQA client operation (TCP), Configuring the TCP operation
- NQA client operation (UDP echo), Configuring the UDP echo operation
- NQA client operation (UDP jitter), Configuring the UDP jitter operation
- NQA client operation (UDP tracert), Configuring the UDP tracert operation
- NQA client operation (voice), Configuring the voice operation
- NQA client operation optional parameters, Configuring optional parameters for the NQA operation
- NQA client operation scheduling, Scheduling the NQA operation on the NQA client
- NQA client statistics collection, Configuring the NQA statistics collection feature
- NQA client template, Configuring NQA templates on the NQA client
- NQA client threshold monitoring, Configuring threshold monitoring
- NQA client+Track collaboration, Configuring the collaboration feature
- NQA collaboration configuration (on switch), NQA collaboration configuration example
- NQA operation configuration (DHCP)(on switch), DHCP operation configuration example
- NQA operation configuration (DLSw), DLSw operation configuration example
- NQA operation configuration (DNS), DNS operation configuration example
- NQA operation configuration (FTP), FTP operation configuration example
- NQA operation configuration (HTTP), HTTP operation configuration example
- NQA operation configuration (ICMP echo), ICMP echo operation configuration example
- NQA operation configuration (ICMP jitter), ICMP jitter operation configuration example
- NQA operation configuration (path jitter), Path jitter operation configuration example
- NQA operation configuration (SNMP), SNMP operation configuration example
- NQA operation configuration (TCP), TCP operation configuration example
- NQA operation configuration (UDP echo), UDP echo operation configuration example
- NQA operation configuration (UDP jitter), UDP jitter operation configuration example
- NQA operation configuration (UDP tracert), UDP tracert operation configuration example
- NQA operation configuration (voice), Voice operation configuration example
- NQA server, Configuring the NQA server
- NQA template configuration (DNS), DNS template configuration example
- NQA template configuration (FTP), FTP template configuration example
- NQA template configuration (HTTP), HTTP template configuration example
- NQA template configuration (HTTPS), HTTPS template configuration example
- NQA template configuration (ICMP), ICMP template configuration example
- NQA template configuration (RADIUS), RADIUS template configuration example
- NQA template configuration (SSL), SSL template configuration example
- NQA template configuration (TCP half open), TCP half open template configuration example
- NQA template configuration (TCP), TCP template configuration example
- NQA template configuration (UDP), UDP template configuration example
- NTP access control rights, Configuring access control rights
- NTP association mode, Configuring NTP association mode
- NTP message receiving disable, Disabling an interface from receiving NTP messages
- ping network connectivity test, Using a ping command to test network connectivity
- PMM 3rd party process start, Starting a third-party process
- PMM 3rd party process stop, Stopping a third-party process
- port mirroring remote destination group, Configuring a remote destination group on the destination device
- port mirroring remote source group, Configuring a remote source group on the source device
- port mirroring remote source group egress port, Configuring the egress port for a remote source group
- port mirroring remote source group reflector port, Configuring the reflector port for a remote source group
- port mirroring remote source group remote probe VLAN, Configuring the remote probe VLAN for a remote source group
- port mirroring remote source group source CPU, Configuring source CPUs for a remote source group
- port mirroring remote source group source ports, Configuring source ports for a remote source group
- quality analyzer. See
- RMON alarm configuration, Configuring the RMON alarm function, Alarm function configuration example
- RMON alarm group sample types, Sample types for the alarm group and the private alarm group
- RMON Ethernet statistics group configuration, Ethernet statistics group configuration example
- RMON history group configuration, History group configuration example
- RMON statistics configuration, Configuring the RMON statistics function
- sFlow counter sampling configuration, Configuring counter sampling
- sFlow flow sampling configuration, Configuring flow sampling
- SNMPv1 basics configuration, Configuring SNMPv1 or SNMPv2c basic parameters
- SNMPv2c basics configuration, Configuring SNMPv1 or SNMPv2c basic parameters
- SNMPv3 basics configuration, Configuring SNMPv3 basic parameters
- tracert node failure identification, Using a tracert command to identify failed or all nodes in a path, Tracert example
- network management
- automated VCF fabric provisioning and deployment, Automated VCF fabric configuration example
- Chef configuration, Configuring Chef, Configuring Chef, Chef configuration example
- Chef configuration file, Chef configuration file
- Chef resources, Chef resources, Chef resources
- CWMP basic functions, Basic CWMP functions
- CWMP configuration, Configuring CWMP, Configuration task list, CWMP configuration example
- EAA configuration, Configuring EAA, EAA configuration examples
- Event MIB configuration, Configuring the Event MIB, Event MIB configuration task list
- information center configuration, Configuring the information center, Information center configuration task list, Information center configuration examples
- NETCONF configuration, Configuring NETCONF
- NQA configuration, Configuring NQA, NQA configuration task list, NQA configuration examples
- NTP configuration, Configuring NTP, Configuration task list, NTP configuration examples
- packet capture configuration, Configuring the packet capture, Packet capture configuration task list, Packet capture configuration examples
- PMM Linux network, Monitoring and maintaining processes
- port mirroring configuration, Configuring port mirroring, Port mirroring configuration examples
- Puppet configuration, Configuring Puppet, Configuring Puppet, Puppet configuration example
- Puppet resources, Puppet resources, Puppet resources
- RMON configuration, Configuring RMON
- sFlow configuration, Configuring sFlow, sFlow configuration task list, sFlow configuration example
- SNMP configuration, Configuring SNMP
- SNMPv1 configuration, SNMPv1/SNMPv2c configuration example
- SNMPv2c configuration, SNMPv1/SNMPv2c configuration example
- VCF fabric configuration, VCF fabric configuration task list
- VCF fabric overview, Configuring VCF fabric
- Network Time Protocol. Use
- networking
- automated VCF fabric provisioning and deployment, Automated VCF fabric provisioning and deployment
- Neutron deployment, Neutron deployment
- NMM
- Chef configuration, Configuring Chef, Configuring Chef, Chef configuration example
- Chef configuration file, Chef configuration file
- Chef framework, Chef network framework
- Chef resources, Chef resources, Chef resources
- CWMP ACS attributes, Configuring ACS attributes
- CWMP ACS attributes (default)(CLI), Configuring the default ACS attributes from the CLI
- CWMP ACS attributes (preferred), Configuring the preferred ACS attributes
- CWMP ACS autoconnect parameters, Configuring autoconnect parameters
- CWMP ACS HTTPS SSL client policy, Specifying an SSL client policy for HTTPS connection to ACS
- CWMP basic functions, Basic CWMP functions
- CWMP configuration, Configuring CWMP, Configuration task list, CWMP configuration example
- CWMP CPE ACS authentication parameters, Configuring ACS authentication parameters
- CWMP CPE ACS connection interface, Configuring the CWMP connection interface
- CWMP CPE ACS provision code, Configuring the provision code
- CWMP CPE attributes, Configuring CPE attributes
- CWMP CPE NAT traversal, Enabling NAT traversal for the CPE
- CWMP framework, CWMP network framework
- CWMP settings display, Displaying and maintaining CWMP
- EAA configuration, Configuring EAA, EAA configuration examples
- EAA environment variable configuration (user-defined), Configuring a user-defined EAA environment variable
- EAA event monitor, Event monitors
- EAA event monitor policy configuration (CLI), CLI event monitor policy configuration example
- EAA event monitor policy configuration (Track), Track event monitor policy configuration example
- EAA event monitor policy element, Elements in a monitor policy
- EAA event monitor policy environment variable, EAA environment variables
- EAA event source, Event sources
- EAA monitor policy, EAA monitor policies
- EAA monitor policy configuration, Configuring a monitor policy
- EAA monitor policy configuration (CLI), Configuring a monitor policy from the CLI
- EAA monitor policy configuration (CLI-defined+environment variables), CLI-defined policy with EAA environment variables configuration example
- EAA monitor policy configuration (Tcl), Configuring a monitor policy by using Tcl
- EAA monitor policy configuration (Tcl-defined), Tcl-defined policy configuration example
- EAA monitor policy suspension, Suspending monitor policies
- EAA RTM, RTM
- EAA settings display, Displaying and maintaining EAA settings
- feature image-based packet capture configuration, Configuring feature image-based packet capture
- feature module debug, Debugging a feature module
- flow mirroring configuration, Flow mirroring configuration example
- information center configuration, Configuring the information center, Information center configuration task list, Information center configuration examples
- information center diagnostic log save (log file), Saving diagnostic logs to the diagnostic log file
- information center display, Displaying and maintaining information center
- information center duplicate log suppression, Enabling duplicate log suppression
- information center interface link up/link down log generation, Disabling an interface from generating link up or link down logs
- information center log default output rules, Default output rules for logs
- information center log destinations, Log destinations
- information center log formats, Log formats
- information center log levels, Log levels
- information center log output (console), Outputting logs to the console
- information center log output (log buffer), Outputting logs to the log buffer
- information center log output (log host), Outputting logs to log hosts
- information center log output (monitor terminal), Outputting logs to the monitor terminal
- information center log output configuration (console), Configuration example for outputting logs to the console
- information center log output configuration (Linux log host), Configuration example for outputting logs to a Linux log host
- information center log output configuration (UNIX log host), Configuration example for outputting logs to a UNIX log host
- information center log save (log file), Saving logs to the log file
- information center log storage period, Setting the minimum storage period for logs
- information center log suppression, Configuring log suppression for a module
- information center maintain, Displaying and maintaining information center
- information center security log file management, Managing the security log file
- information center security log management, Managing security logs
- information center security log save (log file), Saving security logs to the security log file
- information center synchronous log output, Enabling synchronous information output
- information center system log SNMP notification, Enabling SNMP notifications for system logs
- information center system log types, Log types
- information center trace log file max size, Configuring the maximum size of the trace log file
- IPv6 NTP client/server association mode configuration, IPv6 NTP client/server mode configuration example
- IPv6 NTP multicast association mode configuration (on switch), IPv6 NTP multicast mode configuration example
- IPv6 NTP symmetric active/passive association mode configuration, IPv6 NTP symmetric active/passive mode configuration example
- Layer 2 remote port mirroring (egress port), Layer 2 remote port mirroring with egress port configuration task list, Layer 2 remote port mirroring configuration example (with egress port)
- Layer 2 remote port mirroring (reflector port), Layer 2 remote port mirroring with reflector port configuration task list, Layer 2 remote port mirroring configuration example (reflector port)
- Layer 2 remote port mirroring configuration, Configuring Layer 2 remote port mirroring
- Layer 3 remote port mirroring configuration, Configuring Layer 3 remote port mirroring, Layer 3 remote port mirroring configuration example
- Layer 3 remote port mirroring local group, Configuring local mirroring groups
- Layer 3 remote port mirroring local group monitor port, Configuring the monitor port for a local mirroring group
- Layer 3 remote port mirroring local group source CPU, Configuring source CPUs for a local mirroring group
- Layer 3 remote port mirroring local group source port, Configuring source ports for a local mirroring group
- local packet capture configuration, Configuring local packet capture
- local port mirroring (source CPU mode), Local port mirroring configuration example (in source CPU mode)
- local port mirroring (source port mode), Local port mirroring configuration example (in source port mode)
- local port mirroring configuration, Configuring local port mirroring
- local port mirroring group, Creating a local mirroring group
- local port mirroring group monitor port, Configuring the monitor port for the local mirroring group
- local port mirroring group source CPU, Configuring source CPUs for the local mirroring group
- local port mirroring group source port, Configuring source ports for the local mirroring group
- NETCONF capability exchange, Exchanging capabilities
- NETCONF CLI operations, Performing CLI operations through NETCONF, CLI operation example
- NETCONF CLI return, Returning to the CLI
- NETCONF configuration, Configuring NETCONF, NETCONF configuration task list
- NETCONF configuration data retrieval (all modules), All-module configuration data retrieval example
- NETCONF configuration data retrieval (Syslog module), Syslog configuration data retrieval example
- NETCONF configuration load, Saving, rolling back, and loading the configuration
- NETCONF configuration lock/unlock, Locking/unlocking the configuration, Example for locking the configuration
- NETCONF configuration rollback, Saving, rolling back, and loading the configuration
- NETCONF configuration save, Saving, rolling back, and loading the configuration
- NETCONF data entry retrieval (interface table), Example for retrieving a data entry for the interface table
- NETCONF data filtering, Filtering data
- NETCONF edit-config operation, Performing the <edit-config> operation
- NETCONF event notification subscription, Subscribing to event notifications, Example for subscribing to event notifications
- NETCONF get/get-bulk operation, Performing the <get>/<get-bulk> operation
- NETCONF get-config/get-bulk-config operation, Performing the <get-config>/<get-bulk-config> operation
- NETCONF information retrieval, Retrieving NETCONF information
- NETCONF module report event subscription, Subscribing to module report events
- NETCONF monitoring event subscription, Subscribing to monitoring events
- NETCONF over SOAP configuration, Configuring NETCONF over SOAP
- NETCONF over SSH enable, Enabling NETCONF over SSH
- NETCONF parameter value change, Example for changing the value of a parameter
- NETCONF protocols and standards, Protocols and standards
- NETCONF save-point/begin operation, Performing the <save-point/begin> operation
- NETCONF save-point/commit operation, Performing the <save-point/commit> operation
- NETCONF save-point/end operation, Performing the <save-point/end> operation
- NETCONF save-point/get-commit-information operation, Performing the <save-point/get-commit-information> operation
- NETCONF save-point/get-commits operation, Performing the <save-point/get-commits> operation
- NETCONF save-point/rollback operation, Performing the <save-point/rollback> operation
- NETCONF service operations, Performing service operations
- NETCONF session establishment, Establishing a NETCONF session
- NETCONF session information retrieval, Retrieving NETCONF session information
- NETCONF session termination, Terminating another NETCONF session
- NETCONF structure, NETCONF structure
- NETCONF supported operations, Appendix A Supported NETCONF operations
- NETCONF syslog event subscription, Subscribing to syslog events
- NETCONF YANG file content retrieval, Retrieving YANG file content
- NQA client history record save, Configuring the saving of NQA history records
- NQA client operation, Configuring NQA operations on the NQA client
- NQA client operation (DHCP), Configuring the DHCP operation
- NQA client operation (DLSw), Configuring the DLSw operation
- NQA client operation (DNS), Configuring the DNS operation
- NQA client operation (FTP), Configuring the FTP operation
- NQA client operation (HTTP), Configuring the HTTP operation
- NQA client operation (ICMP echo), Configuring the ICMP echo operation
- NQA client operation (ICMP jitter), Configuring the ICMP jitter operation
- NQA client operation (path jitter), Configuring the path jitter operation
- NQA client operation (SNMP), Configuring the SNMP operation
- NQA client operation (TCP), Configuring the TCP operation
- NQA client operation (UDP echo), Configuring the UDP echo operation
- NQA client operation (UDP jitter), Configuring the UDP jitter operation
- NQA client operation (UDP tracert), Configuring the UDP tracert operation
- NQA client operation (voice), Configuring the voice operation
- NQA client operation optional parameters, Configuring optional parameters for the NQA operation
- NQA client operation scheduling, Scheduling the NQA operation on the NQA client
- NQA client statistics collection, Configuring the NQA statistics collection feature
- NQA client template, Configuring NQA templates on the NQA client
- NQA client template (DNS), Configuring the DNS template
- NQA client template (FTP), Configuring the FTP template
- NQA client template (HTTP), Configuring the HTTP template
- NQA client template (HTTPS), Configuring the HTTPS template
- NQA client template (ICMP), Configuring the ICMP template
- NQA client template (RADIUS), Configuring the RADIUS template
- NQA client template (SSL), Configuring the SSL template
- NQA client template (TCP half open), Configuring the TCP half open template
- NQA client template (TCP), Configuring the TCP template
- NQA client template (UDP), Configuring the UDP template
- NQA client template optional parameters, Configuring optional parameters for the NQA template
- NQA client threshold monitoring, Configuring threshold monitoring
- NQA client+Track collaboration, Configuring the collaboration feature
- NQA collaboration configuration (on switch), NQA collaboration configuration example
- NQA configuration, Configuring NQA, NQA configuration task list, NQA configuration examples
- NQA display, Displaying and maintaining NQA
- NQA operation configuration (DHCP)(on switch), DHCP operation configuration example
- NQA operation configuration (DLSw), DLSw operation configuration example
- NQA operation configuration (DNS), DNS operation configuration example
- NQA operation configuration (FTP), FTP operation configuration example
- NQA operation configuration (HTTP), HTTP operation configuration example
- NQA operation configuration (ICMP echo), ICMP echo operation configuration example
- NQA operation configuration (ICMP jitter), ICMP jitter operation configuration example
- NQA operation configuration (path jitter), Path jitter operation configuration example
- NQA operation configuration (SNMP), SNMP operation configuration example
- NQA operation configuration (TCP), TCP operation configuration example
- NQA operation configuration (UDP echo), UDP echo operation configuration example
- NQA operation configuration (UDP jitter), UDP jitter operation configuration example
- NQA operation configuration (UDP tracert), UDP tracert operation configuration example
- NQA operation configuration (voice), Voice operation configuration example
- NQA server, Configuring the NQA server
- NQA template configuration (DNS), DNS template configuration example
- NQA template configuration (FTP), FTP template configuration example
- NQA template configuration (HTTP), HTTP template configuration example
- NQA template configuration (HTTPS), HTTPS template configuration example
- NQA template configuration (ICMP), ICMP template configuration example
- NQA template configuration (RADIUS), RADIUS template configuration example
- NQA template configuration (SSL), SSL template configuration example
- NQA template configuration (TCP half open), TCP half open template configuration example
- NQA template configuration (TCP), TCP template configuration example
- NQA template configuration (UDP), UDP template configuration example
- NQA threshold monitoring, Threshold monitoring
- NQA+Track collaboration, Collaboration
- NTP access control rights, Configuring access control rights
- NTP architecture, NTP architecture
- NTP association mode, Configuring NTP association mode
- NTP authentication configuration, Configuring NTP authentication
- NTP broadcast association mode configuration, Configuring NTP in broadcast mode
- NTP broadcast association mode configuration (on switch), NTP broadcast mode configuration example
- NTP broadcast mode authentication configuration, Configuring NTP authentication in broadcast mode
- NTP broadcast mode+authentication (on switch), Configuration example for NTP broadcast mode with authentication
- NTP client/server association mode configuration, NTP client/server mode configuration example
- NTP client/server mode authentication configuration, Configuring NTP authentication in client/server mode
- NTP client/server mode+authentication, Configuration example for NTP client/server mode with authentication
- NTP configuration, Configuring NTP, Configuration task list, NTP configuration examples
- NTP display, Displaying and maintaining NTP
- NTP dynamic associations max, Configuring the maximum number of dynamic associations
- NTP enable, Enabling the NTP service
- NTP local clock as reference source, Configuring the local clock as a reference source
- NTP message receiving disable, Disabling an interface from receiving NTP messages
- NTP message source interface specification, Specifying the source interface for NTP messages
- NTP multicast association mode, Configuring NTP in multicast mode
- NTP multicast association mode configuration (on switch), NTP multicast mode configuration example
- NTP multicast mode authentication configuration, Configuring NTP authentication in multicast mode
- NTP optional parameter configuration, Configuring NTP optional parameters
- NTP packet DSCP value setting, Setting a DSCP value for NTP packets
- NTP protocols and standards, Protocols and standards
- NTP security, NTP security
- NTP symmetric active/passive association mode configuration, NTP symmetric active/passive mode configuration example
- NTP symmetric active/passive mode authentication configuration, Configuring NTP authentication in symmetric active/passive mode
- packet capture configuration, Configuring the packet capture, Packet capture configuration task list, Packet capture configuration examples
- packet capture configuration (remote), Remote packet capture configuration example
- packet capture display, Displaying and maintaining packet capture
- packet capture display filter configuration, Building a display filter
- packet capture file save, Saving captured packets to a file configuration example
- packet capture filter configuration, Building a capture filter
- packet capture filtered data display, Filtering packet data to display configuration example
- packet file content display, Displaying the contents in a packet file
- ping address reachability determination, Ping example
- ping command, Ping
- ping network connectivity test, Using a ping command to test network connectivity
- port mirroring classification, Port mirroring classification and implementation
- port mirroring configuration, Configuring port mirroring, Port mirroring configuration examples
- port mirroring display, Displaying and maintaining port mirroring
- port mirroring implementation, Port mirroring classification and implementation
- port mirroring remote destination group, Configuring a remote destination group on the destination device
- port mirroring remote source group, Configuring a remote source group on the source device
- Puppet configuration, Configuring Puppet, Configuring Puppet, Puppet configuration example
- Puppet framework, Puppet network framework
- Puppet resources, Puppet resources, Puppet resources
- remote packet capture configuration, Configuring remote packet capture
- RMON alarm configuration, Alarm function configuration example
- RMON configuration, Configuring RMON
- RMON Ethernet statistics group configuration, Ethernet statistics group configuration example
- RMON group, RMON groups
- RMON history group configuration, History group configuration example
- RMON protocols and standards, Protocols and standards
- RMON settings display, Displaying and maintaining RMON settings
- sFlow agent+collector information configuration, Configuring the sFlow agent and sFlow collector information
- sFlow configuration, Configuring sFlow, sFlow configuration task list, sFlow configuration example
- sFlow counter sampling configuration, Configuring counter sampling
- sFlow display, Displaying and maintaining sFlow
- sFlow flow sampling configuration, Configuring flow sampling
- sFlow protocols and standards, Protocols and standards
- shutting down Chef, Shutting down Chef
- shutting down Puppet, Shutting down Puppet on the device
- SNMP access control mode, Access control modes
- SNMP basics configuration, Configuring SNMP basic parameters
- SNMP configuration, Configuring SNMP
- SNMP framework, SNMP framework
- SNMP Get operation, SNMP operations
- SNMP logging configuration, Configuring SNMP logging
- SNMP MIB, MIB and view-based MIB access control
- SNMP notification, Configuring SNMP notifications
- SNMP notification send parameters, Configuring the SNMP agent to send notifications to a host
- SNMP protocol versions, Protocol versions
- SNMP settings display, Displaying the SNMP settings
- SNMP silence, SNMP silence
- SNMP view-based MIB access control, MIB and view-based MIB access control
- SNMPv1 configuration, SNMPv1/SNMPv2c configuration example
- SNMPv2c configuration, SNMPv1/SNMPv2c configuration example
- SNTP authentication, Configuring SNTP authentication
- SNTP configuration, Configuration task list, Configuring SNTP, Configuration task list, SNTP configuration example
- SNTP display, Displaying and maintaining SNTP
- SNTP enable, Enabling the SNTP service
- SNTP NTP server specification, Specifying an NTP server for the device
- starting up Chef, Starting Chef
- starting up Puppet, Starting Puppet
- system debugging, Using ping, tracert, and system debugging, System debugging
- system information default output rules (diagnostic log), Default output rules for diagnostic logs
- system information default output rules (hidden log), Default output rules for hidden logs
- system information default output rules (security log), Default output rules for security logs
- system information default output rules (trace log), Default output rules for trace logs
- system maintenance, Using ping, tracert, and system debugging
- tracert, Tracert
- tracert node failure identification, Using a tracert command to identify failed or all nodes in a path, Tracert example
- troubleshooting sFlow, Troubleshooting sFlow configuration
- troubleshooting sFlow remote collector cannot receive packets, The remote sFlow collector cannot receive sFlow packets
- NMS
- Event MIB SNMP notification enable, Enabling SNMP notifications for Event MIB
- RMON configuration, Configuring RMON
- SNMP Notification operation, SNMP operations
- SNMP protocol versions, Protocol versions
- SNMP Set operation, SNMP operations, SNMP operations
- node
- Event MIB monitored object, Monitored objects
- notifying
- Event MIB event notification action configuration, Configuring a notification action for an event
- Event MIB SNMP notification enable, Enabling SNMP notifications for Event MIB
- information center system log SNMP notification, Enabling SNMP notifications for system logs
- NETCONF event notification subscription, Subscribing to event notifications, Example for subscribing to event notifications
- NETCONF syslog event subscription, Subscribing to syslog events
- SNMP configuration, Configuring SNMP
- SNMP notification, Configuring SNMP notifications
- SNMP Notification operation, SNMP operations
- SNMP notification send parameters, Configuring the SNMP agent to send notifications to a host
- NQA
- client enable, Enabling the NQA client
- client history record save, Configuring the saving of NQA history records
- client operation, Configuring NQA operations on the NQA client
- client operation (DHCP), Configuring the DHCP operation
- client operation (DLSw), Configuring the DLSw operation
- client operation (DNS), Configuring the DNS operation
- client operation (FTP), Configuring the FTP operation
- client operation (HTTP), Configuring the HTTP operation
- client operation (ICMP echo), Configuring the ICMP echo operation
- client operation (ICMP jitter), Configuring the ICMP jitter operation
- client operation (path jitter), Configuring the path jitter operation
- client operation (SNMP), Configuring the SNMP operation
- client operation (TCP), Configuring the TCP operation
- client operation (UDP echo), Configuring the UDP echo operation
- client operation (UDP jitter), Configuring the UDP jitter operation
- client operation (UDP tracert), Configuring the UDP tracert operation
- client operation (voice), Configuring the voice operation
- client operation optional parameters, Configuring optional parameters for the NQA operation
- client operation scheduling, Scheduling the NQA operation on the NQA client
- client statistics collection, Configuring the NQA statistics collection feature
- client template (DNS), Configuring the DNS template
- client template (FTP), Configuring the FTP template
- client template (HTTP), Configuring the HTTP template
- client template (HTTPS), Configuring the HTTPS template
- client template (ICMP), Configuring the ICMP template
- client template (RADIUS), Configuring the RADIUS template
- client template (SSL), Configuring the SSL template
- client template (TCP half open), Configuring the TCP half open template
- client template (TCP), Configuring the TCP template
- client template (UDP), Configuring the UDP template
- client template configuration, Configuring NQA templates on the NQA client
- client template optional parameters, Configuring optional parameters for the NQA template
- client threshold monitoring, Configuring threshold monitoring
- client+Track collaboration, Configuring the collaboration feature
- collaboration configuration (on switch), NQA collaboration configuration example
- configuration, Configuring NQA, NQA configuration task list, NQA configuration examples
- display, Displaying and maintaining NQA
- how it works, NQA operation
- operation configuration (DHCP)(on switch), DHCP operation configuration example
- operation configuration (DLSw), DLSw operation configuration example
- operation configuration (DNS), DNS operation configuration example
- operation configuration (FTP), FTP operation configuration example
- operation configuration (HTTP), HTTP operation configuration example
- operation configuration (ICMP echo), ICMP echo operation configuration example
- operation configuration (ICMP jitter), ICMP jitter operation configuration example
- operation configuration (path jitter), Path jitter operation configuration example
- operation configuration (SNMP), SNMP operation configuration example
- operation configuration (TCP), TCP operation configuration example
- operation configuration (UDP echo), UDP echo operation configuration example
- operation configuration (UDP jitter), UDP jitter operation configuration example
- operation configuration (UDP tracert), UDP tracert operation configuration example
- operation configuration (voice), Voice operation configuration example
- server configuration, Configuring the NQA server
- supported operations, Overview
- template configuration (DNS), DNS template configuration example
- template configuration (FTP), FTP template configuration example
- template configuration (HTTP), HTTP template configuration example
- template configuration (HTTPS), HTTPS template configuration example
- template configuration (ICMP), ICMP template configuration example
- template configuration (RADIUS), RADIUS template configuration example
- template configuration (SSL), SSL template configuration example
- template configuration (TCP half open), TCP half open template configuration example
- template configuration (TCP), TCP template configuration example
- template configuration (UDP), UDP template configuration example
- threshold monitoring, Threshold monitoring
- Track collaboration function, Collaboration
- NTP
- access control, NTP access control
- access control rights configuration, Configuring access control rights
- architecture, NTP architecture
- association mode configuration, Configuring NTP association mode
- authentication, NTP authentication
- authentication configuration, Configuring NTP authentication
- broadcast association mode, Association modes
- broadcast association mode configuration, Configuring NTP in broadcast mode
- broadcast association mode configuration (on switch), NTP broadcast mode configuration example
- broadcast client configuration, Configuring a broadcast client
- broadcast mode authentication configuration, Configuring NTP authentication in broadcast mode
- broadcast mode dynamic associations max, Configuring the maximum number of dynamic associations
- broadcast mode+authentication (on switch), Configuration example for NTP broadcast mode with authentication
- broadcast server configuration, Configuring the broadcast server
- client/server association mode, Association modes
- client/server association mode configuration, Configuring NTP in client/server mode, NTP client/server mode configuration example
- client/server mode authentication configuration, Configuring NTP authentication in client/server mode
- client/server mode dynamic associations max, Configuring the maximum number of dynamic associations
- client/server mode+authentication, Configuration example for NTP client/server mode with authentication
- configuration, Configuring NTP, Configuration task list, NTP configuration examples
- configuration restrictions, Configuration restrictions and guidelines
- display, Displaying and maintaining NTP
- enable, Enabling the NTP service
- how it works, How NTP works
- IPv6 client/server association mode configuration, IPv6 NTP client/server mode configuration example
- IPv6 multicast association mode configuration (on switch), IPv6 NTP multicast mode configuration example
- IPv6 symmetric active/passive association mode configuration, IPv6 NTP symmetric active/passive mode configuration example
- local clock as reference source, Configuring the local clock as a reference source
- message receiving disable, Disabling an interface from receiving NTP messages
- message source interface specification, Specifying the source interface for NTP messages
- multicast association mode, Association modes
- multicast association mode configuration, Configuring NTP in multicast mode
- multicast association mode configuration (on switch), NTP multicast mode configuration example
- multicast client configuration, Configuring a multicast client
- multicast mode authentication configuration, Configuring NTP authentication in multicast mode
- multicast mode dynamic associations max, Configuring the maximum number of dynamic associations
- multicast server configuration, Configuring the multicast server
- optional parameter configuration, Configuring NTP optional parameters
- packet DSCP value setting, Setting a DSCP value for NTP packets
- protocols and standards, Protocols and standards
- security, NTP security
- SNTP authentication, Configuring SNTP authentication
- SNTP configuration, Configuration task list, Configuring SNTP, Configuration task list, SNTP configuration example
- SNTP configuration restrictions, Configuration restrictions and guidelines
- SNTP server specification, Specifying an NTP server for the device
- symmetric active/passive association mode, Association modes
- symmetric active/passive association mode configuration, Configuring NTP in symmetric active/passive mode, NTP symmetric active/passive mode configuration example
- symmetric active/passive mode authentication configuration, Configuring NTP authentication in symmetric active/passive mode
- symmetric active/passive mode dynamic associations max, Configuring the maximum number of dynamic associations
O
- object
- Event MIB monitored, Monitored objects
- Event MIB object list configuration, Configuring Event MIB object lists
- Event MIB object owner, Object owner
- operator
- packet capture arithmetic, Filter elements
- packet capture logical, Filter elements
- packet capture relational, Filter elements
- outbound
- port mirroring, Mirroring direction
- outputting
- information center log configuration (console), Configuration example for outputting logs to the console
- information center log configuration (Linux log host), Configuration example for outputting logs to a Linux log host
- information center log default output rules, Default output rules for logs
- information center logs (log buffer), Outputting logs to the log buffer
- information center logs configuration (UNIX log host), Configuration example for outputting logs to a UNIX log host
- information center synchronous log output, Enabling synchronous information output
- information logs (console), Outputting logs to the console
- information logs (log host), Outputting logs to log hosts
- information logs (monitor terminal), Outputting logs to the monitor terminal
- overlay network
- automated deployment, Automated overlay network deployment
P
- packet
- flow mirroring configuration, Configuring flow mirroring, Flow mirroring configuration task list, Flow mirroring configuration example
- flow mirroring match criteria, Configuring match criteria
- flow mirroring QoS policy, Configuring a QoS policy
- flow mirroring QoS policy application, Applying a QoS policy
- flow mirroring traffic behavior, Configuring a traffic behavior
- Layer 3 remote port mirroring configuration, Configuring Layer 3 remote port mirroring
- NTP DSCP value setting, Setting a DSCP value for NTP packets
- packet capture display filter configuration (packet field expression), Packet field expression
- port mirroring configuration, Configuring port mirroring, Port mirroring configuration examples
- SNMP silence, SNMP silence
- SNTP configuration, Configuration task list, Configuring SNTP, Configuration task list, SNTP configuration example
- packet capture
- capture filter keywords, Capture filter keywords
- capture filter operator, Capture filter operators
- configuration, Configuring the packet capture, Packet capture configuration task list, Packet capture configuration examples
- display, Displaying and maintaining packet capture
- display filter configuration, Building a display filter
- display filter configuration (logical expression), Logical expression
- display filter configuration (packet field expression), Packet field expression
- display filter configuration (proto[…] expression), The proto[…] expression
- display filter configuration (relational expression), Relational expression
- display filter keyword, Display filter keywords
- display filter operator, Display filter operators
- feature image-based configuration, Configuring feature image-based packet capture
- feature image-based file save, Saving captured packets to a file
- feature image-based packet data display filter, Filtering packet data to display
- file content display, Displaying the contents in a packet file
- file save, Saving captured packets to a file configuration example
- filter configuration, Building a capture filter
- filter configuration (expr relop expr expression), The expr relop expr expression
- filter configuration (logical expression), Logical expression
- filter configuration (proto [ exprsize ] expression), The proto [ expr:size ] expression
- filter configuration (vlan vlan_id expression), The vlan vlan_id expression
- filter data to display, Filtering packet data to display configuration example
- filter elements, Filter elements
- local configuration, Configuring local packet capture
- mode, Packet capture modes
- remote configuration, Configuring remote packet capture, Remote packet capture configuration example
- parameter
- CWMP CPE ACS authentication, Configuring ACS authentication parameters
- NETCONF parameter value change, Example for changing the value of a parameter
- NQA client history record save, Configuring the saving of NQA history records
- NQA client operation optional parameters, Configuring optional parameters for the NQA operation
- NQA client template optional parameters, Configuring optional parameters for the NQA template
- NTP dynamic associations max, Configuring the maximum number of dynamic associations
- NTP local clock as reference source, Configuring the local clock as a reference source
- NTP message receiving disable, Disabling an interface from receiving NTP messages
- NTP message source interface, Specifying the source interface for NTP messages
- NTP optional parameter configuration, Configuring NTP optional parameters
- SNMP basics configuration, Configuring SNMP basic parameters
- SNMPv1 basics configuration, Configuring SNMPv1 or SNMPv2c basic parameters
- SNMPv2c basics configuration, Configuring SNMPv1 or SNMPv2c basic parameters
- SNMPv3 basics configuration, Configuring SNMPv3 basic parameters
- path
- NQA client operation (path jitter), Configuring the path jitter operation
- NQA operation configuration, Path jitter operation configuration example
- performing
- NETCONF CLI operations, Performing CLI operations through NETCONF, CLI operation example
- NETCONF edit-config operation, Performing the <edit-config> operation
- NETCONF get/get-bulk operation, Performing the <get>/<get-bulk> operation
- NETCONF get-config/get-bulk-config operation, Performing the <get-config>/<get-bulk-config> operation
- NETCONF save-point/begin operation, Performing the <save-point/begin> operation
- NETCONF save-point/commit operation, Performing the <save-point/commit> operation
- NETCONF save-point/end operation, Performing the <save-point/end> operation
- NETCONF save-point/get-commit-information operation, Performing the <save-point/get-commit-information> operation
- NETCONF save-point/get-commits operation, Performing the <save-point/get-commits> operation
- NETCONF save-point/rollback operation, Performing the <save-point/rollback> operation
- NETCONF service operations, Performing service operations
- ping
- address reachability determination, Ping, Ping example
- network connectivity test, Using a ping command to test network connectivity
- system maintenance, Using ping, tracert, and system debugging
- PMM
- 3rd party process start, Starting a third-party process
- 3rd party process stop, Stopping a third-party process
- display, Displaying and maintaining processes
- kernel thread deadloop detection, Configuring kernel thread deadloop detection
- kernel thread monitoring, Monitoring kernel threads
- kernel thread starvation detection, Configuring kernel thread starvation detection
- Linux kernel thread, Monitoring and maintaining processes
- Linux network, Monitoring and maintaining processes
- Linux user, Monitoring and maintaining processes
- maintain, Displaying and maintaining processes
- user PMM display, Displaying and maintaining user processes
- user PMM maintain, Displaying and maintaining user processes
- policy
- CWMP ACS HTTPS SSL client policy, Specifying an SSL client policy for HTTPS connection to ACS
- EAA configuration, Configuring EAA, EAA configuration examples
- EAA environment variable configuration (user-defined), Configuring a user-defined EAA environment variable
- EAA event monitor policy configuration (CLI), CLI event monitor policy configuration example
- EAA event monitor policy configuration (Track), Track event monitor policy configuration example
- EAA event monitor policy element, Elements in a monitor policy
- EAA event monitor policy environment variable, EAA environment variables
- EAA monitor policy, EAA monitor policies
- EAA monitor policy configuration, Configuring a monitor policy
- EAA monitor policy configuration (CLI), Configuring a monitor policy from the CLI
- EAA monitor policy configuration (CLI-defined+environment variables), CLI-defined policy with EAA environment variables configuration example
- EAA monitor policy configuration (Tcl), Configuring a monitor policy by using Tcl
- EAA monitor policy configuration (Tcl-defined), Tcl-defined policy configuration example
- EAA monitor policy suspension, Suspending monitor policies
- flow mirroring QoS policy, Configuring a QoS policy
- flow mirroring QoS policy application, Applying a QoS policy
- port
- IPv6 NTP client/server association mode, IPv6 NTP client/server mode configuration example
- IPv6 NTP multicast association mode (on switch), IPv6 NTP multicast mode configuration example
- IPv6 NTP symmetric active/passive association mode, IPv6 NTP symmetric active/passive mode configuration example
- mirroring. See
- NTP association mode, Configuring NTP association mode
- NTP broadcast association mode (on switch), NTP broadcast mode configuration example
- NTP broadcast mode+authentication (on switch), Configuration example for NTP broadcast mode with authentication
- NTP client/server association mode, NTP client/server mode configuration example
- NTP client/server mode+authentication, Configuration example for NTP client/server mode with authentication
- NTP configuration, Configuring NTP, Configuration task list, NTP configuration examples
- NTP multicast association mode (on switch), NTP multicast mode configuration example
- NTP symmetric active/passive association mode, NTP symmetric active/passive mode configuration example
- SNTP configuration, Configuration task list, Configuring SNTP, Configuration task list, SNTP configuration example
- port mirroring
- classification, Port mirroring classification and implementation
- configuration, Configuring port mirroring, Port mirroring configuration examples
- display, Displaying and maintaining port mirroring
- implementation, Port mirroring classification and implementation
- Layer 2 remote (reflector port), Layer 2 remote port mirroring with reflector port configuration task list
- Layer 2 remote configuration, Configuring Layer 2 remote port mirroring
- Layer 2 remote configuration (egress port), Layer 2 remote port mirroring with egress port configuration task list
- Layer 2 remote port mirroring configuration (egress port), Layer 2 remote port mirroring configuration example (with egress port)
- Layer 2 remote port mirroring configuration (reflector port), Layer 2 remote port mirroring configuration example (reflector port)
- Layer 3 local group source port configuration restrictions, Configuration restrictions and guidelines
- Layer 3 remote configuration, Configuring Layer 3 remote port mirroring
- Layer 3 remote port mirroring configuration, Layer 3 remote port mirroring configuration example
- Layer 3 remote port mirroring local mirroring group monitor port configuration restrictions, Configuration restrictions and guidelines
- local configuration, Configuring local port mirroring
- local group creation, Creating a local mirroring group
- local group monitor port, Configuring the monitor port for the local mirroring group
- local group monitor port configuration restrictions, Configuration restrictions and guidelines
- local group source CPU, Configuring source CPUs for the local mirroring group
- local group source port, Configuring source ports for the local mirroring group
- local group source port configuration restrictions, Configuration restrictions and guidelines
- local mirroring configuration (source CPU mode), Local port mirroring configuration example (in source CPU mode)
- local mirroring configuration (source port mode), Local port mirroring configuration example (in source port mode)
- monitor port to remote probe VLAN assignment, Assigning the monitor port to the remote probe VLAN
- remote destination group configuration, Configuring a remote destination group on the destination device
- remote destination group creation, Creating a remote destination group
- remote destination group monitor port, Configuring the monitor port for a remote destination group
- remote destination group remote probe VLAN, Configuring the remote probe VLAN for a remote destination group
- remote source group configuration, Configuring a remote source group on the source device
- terminology, Terminology
- prerequisite
- automated underlay network provisioning, Provisioning prerequisites
- private
- RMON private alarm group, Private alarm group
- procedure
- applying flow mirroring QoS policy, Applying a QoS policy
- applying flow mirroring QoS policy (control plane), Applying a QoS policy to the control plane
- applying flow mirroring QoS policy (global), Applying a QoS policy globally
- applying flow mirroring QoS policy (interface), Applying a QoS policy to an interface
- applying flow mirroring QoS policy (VLAN), Applying a QoS policy to a VLAN
- assigning CWMP ACS attribute (preferred)(CLI), Configuring the preferred ACS attributes from the CLI
- assigning CWMP ACS attribute (preferred)(DHCP server), Assigning ACS attributes from the DHCP server
- changing NETCONF parameter value, Example for changing the value of a parameter
- configuring automated overlay network deployment, Configuring automated overlay network deployment
- configuring automated underlay network provisioning, Configuring automated underlay network provisioning
- configuring Chef, Configuring Chef, Chef configuration example
- configuring Chef client, Configuring a Chef client
- configuring Chef server, Configuring the Chef server
- configuring CWMP, Configuration task list, CWMP configuration example
- configuring CWMP ACS attribute, Configuring ACS attributes
- configuring CWMP ACS attribute (default)(CLI), Configuring the default ACS attributes from the CLI
- configuring CWMP ACS attribute (preferred), Configuring the preferred ACS attributes
- configuring CWMP ACS autoconnect parameters, Configuring autoconnect parameters
- configuring CWMP ACS close-wait timer, Setting the close-wait timer
- configuring CWMP ACS connection retry max number, Setting the maximum number of connection retries
- configuring CWMP ACS periodic Inform feature, Configuring the periodic Inform feature
- configuring CWMP CPE ACS authentication parameters, Configuring ACS authentication parameters
- configuring CWMP CPE ACS connection interface, Configuring the CWMP connection interface
- configuring CWMP CPE ACS provision code, Configuring the provision code
- configuring CWMP CPE attribute, Configuring CPE attributes
- configuring CWMP CPE NAT traversal, Enabling NAT traversal for the CPE
- configuring EAA environment variable (user-defined), Configuring a user-defined EAA environment variable
- configuring EAA event monitor policy (CLI), CLI event monitor policy configuration example
- configuring EAA event monitor policy (Track), Track event monitor policy configuration example
- configuring EAA monitor policy, Configuring a monitor policy
- configuring EAA monitor policy (CLI), Configuring a monitor policy from the CLI
- configuring EAA monitor policy (CLI-defined+environment variables), CLI-defined policy with EAA environment variables configuration example
- configuring EAA monitor policy (Tcl), Configuring a monitor policy by using Tcl
- configuring EAA monitor policy (Tcl-defined), Tcl-defined policy configuration example
- configuring Event MIB, Event MIB configuration task list
- configuring Event MIB notification action, Configuring a notification action for an event
- configuring Event MIB object list, Configuring Event MIB object lists
- configuring Event MIB sampling, Configuring Event MIB sampling
- configuring Event MIB set action, Configuring a set action for an event
- configuring Event MIB trigger test, Configuring a trigger
- configuring Event MIB trigger test (Boolean), Configuring a Boolean trigger test, Boolean trigger test configuration example
- configuring Event MIB trigger test (existence), Configuring an existence trigger test, Existence trigger test configuration example
- configuring Event MIB trigger test (threshold), Configuring a threshold trigger test, Threshold trigger test configuration example
- configuring feature image-based packet capture, Configuring feature image-based packet capture
- configuring flow mirroring, Flow mirroring configuration task list, Flow mirroring configuration example
- configuring flow mirroring match criteria, Configuring match criteria
- configuring flow mirroring QoS policy, Configuring a QoS policy
- configuring flow mirroring traffic behavior, Configuring a traffic behavior
- configuring information center, Information center configuration task list
- configuring information center log output (console), Configuration example for outputting logs to the console
- configuring information center log output (Linux log host), Configuration example for outputting logs to a Linux log host
- configuring information center log output (UNIX log host), Configuration example for outputting logs to a UNIX log host
- configuring information center log storage period, Setting the minimum storage period for logs
- configuring information center log suppression, Configuring log suppression for a module
- configuring information center trace log file max size, Configuring the maximum size of the trace log file
- configuring IPv6 NTP client/server association mode, IPv6 NTP client/server mode configuration example
- configuring IPv6 NTP multicast association mode (on switch), IPv6 NTP multicast mode configuration example
- configuring IPv6 NTP symmetric active/passive association mode, IPv6 NTP symmetric active/passive mode configuration example
- configuring Layer 2 remote port mirroring, Configuring Layer 2 remote port mirroring
- configuring Layer 2 remote port mirroring (egress port), Layer 2 remote port mirroring with egress port configuration task list, Layer 2 remote port mirroring configuration example (with egress port)
- configuring Layer 2 remote port mirroring (reflector port), Layer 2 remote port mirroring with reflector port configuration task list, Layer 2 remote port mirroring configuration example (reflector port)
- configuring Layer 3 remote port mirroring, Configuring Layer 3 remote port mirroring, Layer 3 remote port mirroring configuration example
- configuring Layer 3 remote port mirroring local group, Configuring local mirroring groups
- configuring Layer 3 remote port mirroring local group monitor port (interface view), Configuring the monitor port in interface view
- configuring Layer 3 remote port mirroring local group monitor port (system view), Configuring the monitor port in system view
- configuring Layer 3 remote port mirroring local group source port, Configuring source ports for a local mirroring group
- configuring Layer 3 remote port mirroring local group source ports (interface view), Configuring source ports in interface view
- configuring Layer 3 remote port mirroring local group source ports (system view), Configuring source ports in system view
- configuring Layer 3 remote port mirroring local mirroring group monitor port, Configuring the monitor port for a local mirroring group
- configuring Layer 3 remote port mirroring local mirroring group source CPU, Configuring source CPUs for a local mirroring group
- configuring local packet capture, Configuring local packet capture
- configuring local port mirroring, Configuring local port mirroring
- configuring local port mirroring (source CPU mode), Local port mirroring configuration example (in source CPU mode)
- configuring local port mirroring (source port mode), Local port mirroring configuration example (in source port mode)
- configuring local port mirroring group monitor port, Configuring the monitor port for the local mirroring group
- configuring local port mirroring group monitor port (interface view), Configuring the monitor port in interface view
- configuring local port mirroring group monitor port (system view), Configuring the monitor port in system view
- configuring local port mirroring group source CPUs, Configuring source CPUs for the local mirroring group
- configuring local port mirroring group source ports, Configuring source ports for the local mirroring group
- configuring local port mirroring group source ports (interface view), Configuring source ports in interface view
- configuring local port mirroring group source ports (system view), Configuring source ports in system view
- configuring NETCONF, NETCONF configuration task list
- configuring NETCONF over SOAP, Configuring NETCONF over SOAP
- configuring NQA, NQA configuration task list
- configuring NQA client history record save, Configuring the saving of NQA history records
- configuring NQA client operation, Configuring NQA operations on the NQA client
- configuring NQA client operation (DHCP), Configuring the DHCP operation
- configuring NQA client operation (DLSw), Configuring the DLSw operation
- configuring NQA client operation (DNS), Configuring the DNS operation
- configuring NQA client operation (FTP), Configuring the FTP operation
- configuring NQA client operation (HTTP), Configuring the HTTP operation
- configuring NQA client operation (ICMP echo), Configuring the ICMP echo operation
- configuring NQA client operation (ICMP jitter), Configuring the ICMP jitter operation
- configuring NQA client operation (path jitter), Configuring the path jitter operation
- configuring NQA client operation (SNMP), Configuring the SNMP operation
- configuring NQA client operation (TCP), Configuring the TCP operation
- configuring NQA client operation (UDP echo), Configuring the UDP echo operation
- configuring NQA client operation (UDP jitter), Configuring the UDP jitter operation
- configuring NQA client operation (UDP tracert), Configuring the UDP tracert operation
- configuring NQA client operation (voice), Configuring the voice operation
- configuring NQA client operation optional parameters, Configuring optional parameters for the NQA operation
- configuring NQA client statistics collection, Configuring the NQA statistics collection feature
- configuring NQA client template, Configuring NQA templates on the NQA client
- configuring NQA client template (DNS), Configuring the DNS template
- configuring NQA client template (FTP), Configuring the FTP template
- configuring NQA client template (HTTP), Configuring the HTTP template
- configuring NQA client template (HTTPS), Configuring the HTTPS template
- configuring NQA client template (ICMP), Configuring the ICMP template
- configuring NQA client template (RADIUS), Configuring the RADIUS template
- configuring NQA client template (SSL), Configuring the SSL template
- configuring NQA client template (TCP half open), Configuring the TCP half open template
- configuring NQA client template (TCP), Configuring the TCP template
- configuring NQA client template (UDP), Configuring the UDP template
- configuring NQA client template optional parameters, Configuring optional parameters for the NQA template
- configuring NQA client threshold monitoring, Configuring threshold monitoring
- configuring NQA client+Track collaboration, Configuring the collaboration feature
- configuring NQA collaboration (on switch), NQA collaboration configuration example
- configuring NQA operation (DHCP)(on switch), DHCP operation configuration example
- configuring NQA operation (DLSw), DLSw operation configuration example
- configuring NQA operation (DNS), DNS operation configuration example
- configuring NQA operation (FTP), FTP operation configuration example
- configuring NQA operation (HTTP), HTTP operation configuration example
- configuring NQA operation (ICMP echo), ICMP echo operation configuration example
- configuring NQA operation (ICMP jitter), ICMP jitter operation configuration example
- configuring NQA operation (path jitter), Path jitter operation configuration example
- configuring NQA operation (SNMP), SNMP operation configuration example
- configuring NQA operation (TCP), TCP operation configuration example
- configuring NQA operation (UDP echo), UDP echo operation configuration example
- configuring NQA operation (UDP jitter), UDP jitter operation configuration example
- configuring NQA operation (UDP tracert), UDP tracert operation configuration example
- configuring NQA operation (voice), Voice operation configuration example
- configuring NQA server, Configuring the NQA server
- configuring NQA template (DNS), DNS template configuration example
- configuring NQA template (FTP), FTP template configuration example
- configuring NQA template (HTTP), HTTP template configuration example
- configuring NQA template (HTTPS), HTTPS template configuration example
- configuring NQA template (ICMP), ICMP template configuration example
- configuring NQA template (RADIUS), RADIUS template configuration example
- configuring NQA template (SSL), SSL template configuration example
- configuring NQA template (TCP half open), TCP half open template configuration example
- configuring NQA template (TCP), TCP template configuration example
- configuring NQA template (UDP), UDP template configuration example
- configuring NTP, Configuration task list
- configuring NTP access control rights, Configuring access control rights
- configuring NTP association mode, Configuring NTP association mode
- configuring NTP broadcast association mode, Configuring NTP in broadcast mode
- configuring NTP broadcast association mode (on switch), NTP broadcast mode configuration example
- configuring NTP broadcast client, Configuring a broadcast client
- configuring NTP broadcast mode authentication, Configuring NTP authentication in broadcast mode
- configuring NTP broadcast mode+authentication (on switch), Configuration example for NTP broadcast mode with authentication
- configuring NTP broadcast server, Configuring the broadcast server
- configuring NTP client/server association mode, Configuring NTP in client/server mode, NTP client/server mode configuration example
- configuring NTP client/server mode authentication, Configuring NTP authentication in client/server mode
- configuring NTP client/server mode+authentication, Configuration example for NTP client/server mode with authentication
- configuring NTP dynamic associations max, Configuring the maximum number of dynamic associations
- configuring NTP local clock as reference source, Configuring the local clock as a reference source
- configuring NTP multicast association mode, Configuring NTP in multicast mode
- configuring NTP multicast association mode (on switch), NTP multicast mode configuration example
- configuring NTP multicast client, Configuring a multicast client
- configuring NTP multicast mode authentication, Configuring NTP authentication in multicast mode
- configuring NTP multicast server, Configuring the multicast server
- configuring NTP optional parameters, Configuring NTP optional parameters
- configuring NTP symmetric active/passive association mode, Configuring NTP in symmetric active/passive mode, NTP symmetric active/passive mode configuration example
- configuring NTP symmetric active/passive mode authentication, Configuring NTP authentication in symmetric active/passive mode
- configuring packet capture, Packet capture configuration task list
- configuring packet capture (remote), Remote packet capture configuration example
- configuring packet capture file save, Saving captured packets to a file configuration example
- configuring packet capture filtered data display, Filtering packet data to display configuration example
- configuring PMM kernel thread deadloop detection, Configuring kernel thread deadloop detection
- configuring PMM kernel thread starvation detection, Configuring kernel thread starvation detection
- configuring port mirroring monitor port to remote probe VLAN assignment, Assigning the monitor port to the remote probe VLAN
- configuring port mirroring remote destination group monitor port, Configuring the monitor port for a remote destination group
- configuring port mirroring remote destination group on the destination device, Configuring a remote destination group on the destination device
- configuring port mirroring remote destination group remote probe VLAN, Configuring the remote probe VLAN for a remote destination group
- configuring port mirroring remote source group egress port, Configuring the egress port for a remote source group
- configuring port mirroring remote source group on source device, Configuring a remote source group on the source device
- configuring port mirroring remote source group reflector port, Configuring the reflector port for a remote source group
- configuring port mirroring remote source group remote probe VLAN, Configuring the remote probe VLAN for a remote source group
- configuring port mirroring remote source group source CPU, Configuring source CPUs for a remote source group
- configuring port mirroring remote source group source ports, Configuring source ports for a remote source group
- configuring Puppet, Configuring Puppet, Puppet configuration example
- configuring remote packet capture, Configuring remote packet capture
- configuring RMON alarm, Configuring the RMON alarm function, Alarm function configuration example
- configuring RMON Ethernet statistics group, Ethernet statistics group configuration example
- configuring RMON history group, History group configuration example
- configuring RMON statistics, Configuring the RMON statistics function
- configuring sFlow, sFlow configuration task list, sFlow configuration example
- configuring sFlow agent+collector information, Configuring the sFlow agent and sFlow collector information
- configuring sFlow counter sampling, Configuring counter sampling
- configuring sFlow flow sampling, Configuring flow sampling
- configuring SNMP basic parameters, Configuring SNMP basic parameters
- configuring SNMP logging, Configuring SNMP logging
- configuring SNMP notification, Configuring SNMP notifications
- configuring SNMPv1, SNMPv1/SNMPv2c configuration example
- configuring SNMPv1 basics, Configuring SNMPv1 or SNMPv2c basic parameters
- configuring SNMPv1 notification send parameters, Configuring the SNMP agent to send notifications to a host
- configuring SNMPv2c, SNMPv1/SNMPv2c configuration example
- configuring SNMPv2c basics, Configuring SNMPv1 or SNMPv2c basic parameters
- configuring SNMPv2c notification send parameters, Configuring the SNMP agent to send notifications to a host
- configuring SNMPv3 basic parameters, Configuring SNMPv3 basic parameters
- configuring SNMPv3 notification send parameters, Configuring the SNMP agent to send notifications to a host
- configuring SNTP, Configuration task list, Configuration task list, SNTP configuration example
- configuring SNTP authentication, Configuring SNTP authentication
- configuring VCF fabric, VCF fabric configuration task list
- configuring workstation, Configuring a workstation
- creating Event MIB event, Creating an event
- creating local port mirroring group, Creating a local mirroring group
- creating port mirroring remote destination group, Creating a remote destination group
- creating port mirroring remote source group, Creating a remote source group
- creating RMON Ethernet statistics entry, Creating an RMON Ethernet statistics entry
- creating RMON history control entry, Creating an RMON history control entry
- debugging feature module, Debugging a feature module
- determining ping address reachability, Ping example
- disabling information center interface link up/link down log generation, Disabling an interface from generating link up or link down logs
- disabling NTP message interface receiving, Disabling an interface from receiving NTP messages
- displaying CWMP settings, Displaying and maintaining CWMP
- displaying EAA settings, Displaying and maintaining EAA settings
- displaying Event MIB, Displaying and maintaining the Event MIB
- displaying information center, Displaying and maintaining information center
- displaying NMM sFlow, Displaying and maintaining sFlow
- displaying NQA, Displaying and maintaining NQA
- displaying NTP, Displaying and maintaining NTP
- displaying packet capture, Displaying and maintaining packet capture
- displaying packet file content, Displaying the contents in a packet file
- displaying PMM, Displaying and maintaining processes
- displaying PMM kernel threads, Displaying and maintaining kernel threads
- displaying port mirroring, Displaying and maintaining port mirroring
- displaying RMON settings, Displaying and maintaining RMON settings
- displaying SNMP settings, Displaying the SNMP settings
- displaying SNTP, Displaying and maintaining SNTP
- displaying user PMM, Displaying and maintaining user processes
- displaying VCF fabric, Displaying and maintaining VCF fabric
- enabling CWMP, Enabling CWMP from the CLI
- enabling Event MIB SNMP notification, Enabling SNMP notifications for Event MIB
- enabling information center duplicate log suppression, Enabling duplicate log suppression
- enabling information center synchronous log output, Enabling synchronous information output
- enabling information center system log SNMP notification, Enabling SNMP notifications for system logs
- enabling NETCONF logging, Enabling NETCONF logging
- enabling NETCONF over SSH, Enabling NETCONF over SSH
- enabling NQA client, Enabling the NQA client
- enabling NTP, Enabling the NTP service
- enabling SNMP notification, Enabling SNMP notifications
- enabling SNTP, Enabling the SNTP service
- enabling VCF fabric topology discovery, Enabling VCF fabric topology discovery
- entering NETCONF XML view, Entering XML view
- establishing NETCONF session, Establishing a NETCONF session
- exchanging NETCONF capabilities, Exchanging capabilities
- filtering feature image-based packet capture data display, Filtering packet data to display
- filtering NETCONF data, Filtering data
- filtering NETCONF data (conditional match), Example for filtering data by conditional match
- filtering NETCONF data (regex match), Example for filtering data with regular expression match
- identifying tracert node failure, Using a tracert command to identify failed or all nodes in a path, Tracert example
- loading NETCONF configuration, Saving, rolling back, and loading the configuration, Loading the configuration
- locking NETCONF configuration, Locking/unlocking the configuration, Example for locking the configuration
- maintaining information center, Displaying and maintaining information center
- maintaining PMM, Displaying and maintaining processes
- maintaining PMM kernel threads, Displaying and maintaining kernel threads
- maintaining user PMM, Displaying and maintaining user processes
- maintaining VCF fabric, Displaying and maintaining VCF fabric
- managing information center security log, Managing security logs
- managing information center security log file, Managing the security log file
- monitoring PMM kernel thread, Monitoring kernel threads
- outputting information center logs (console), Outputting logs to the console
- outputting information center logs (log buffer), Outputting logs to the log buffer
- outputting information center logs (log host), Outputting logs to log hosts
- outputting information center logs (monitor terminal), Outputting logs to the monitor terminal
- performing NETCONF CLI operations, Performing CLI operations through NETCONF, CLI operation example
- performing NETCONF edit-config operation, Performing the <edit-config> operation
- performing NETCONF get/get-bulk operation, Performing the <get>/<get-bulk> operation
- performing NETCONF get-config/get-bulk-config operation, Performing the <get-config>/<get-bulk-config> operation
- performing NETCONF save-point/begin operation, Performing the <save-point/begin> operation
- performing NETCONF save-point/commit operation, Performing the <save-point/commit> operation
- performing NETCONF save-point/end operation, Performing the <save-point/end> operation
- performing NETCONF save-point/get-commit-information operation, Performing the <save-point/get-commit-information> operation
- performing NETCONF save-point/get-commits operation, Performing the <save-point/get-commits> operation
- performing NETCONF save-point/rollback operation, Performing the <save-point/rollback> operation
- performing NETCONF service operations, Performing service operations
- retrieving NETCONF configuration data (all modules), All-module configuration data retrieval example
- retrieving NETCONF configuration data (Syslog module), Syslog configuration data retrieval example
- retrieving NETCONF data entry (interface table), Example for retrieving a data entry for the interface table
- retrieving NETCONF information, Retrieving NETCONF information
- retrieving NETCONF session information, Retrieving NETCONF session information
- retrieving NETCONF YANG file content information, Retrieving YANG file content
- returning to NETCONF CLI, Returning to the CLI
- rolling back NETCONF configuration, Saving, rolling back, and loading the configuration
- rolling back NETCONF configuration (configuration file-based), Rolling back the configuration based on a configuration file
- rolling back NETCONF configuration (rollback point-based), Rolling back the configuration based on a rollback point
- saving feature image-based packet capture to file, Saving captured packets to a file
- saving information center diagnostic logs (log file), Saving diagnostic logs to the diagnostic log file
- saving information center log (log file), Saving logs to the log file
- saving information center security logs (log file), Saving security logs to the security log file
- saving NETCONF configuration, Saving, rolling back, and loading the configuration, Saving the configuration, Example for saving the configuration
- scheduling CWMP ACS connection initiation, Scheduling a connection initiation
- scheduling NQA client operation, Scheduling the NQA operation on the NQA client
- setting NETCONF session idle timeout time, Setting the NETCONF session idle timeout time
- setting NTP packet DSCP value, Setting a DSCP value for NTP packets
- shutting down Chef, Shutting down Chef
- shutting down Puppet, Shutting down Puppet on the device
- specifying CWMP ACS HTTPS SSL client policy, Specifying an SSL client policy for HTTPS connection to ACS
- specifying NTP message source interface, Specifying the source interface for NTP messages
- specifying SNTP NTP server, Specifying an NTP server for the device
- starting PMM 3rd party process, Starting a third-party process
- starting up Chef, Starting Chef
- starting up Puppet, Starting Puppet
- stopping PMM 3rd party process, Stopping a third-party process
- subscribing to NETCONF event notifications, Subscribing to event notifications, Example for subscribing to event notifications
- subscribing to NETCONF module report event, Subscribing to module report events
- subscribing to NETCONF monitoring event, Subscribing to monitoring events
- subscribing to NETCONF syslog event, Subscribing to syslog events
- suspending EAA monitor policy, Suspending monitor policies
- terminating NETCONF session, Terminating another NETCONF session
- testing network connectivity with ping, Using a ping command to test network connectivity
- troubleshooting sFlow remote collector cannot receive packets, The remote sFlow collector cannot receive sFlow packets
- unlocking NETCONF configuration, Locking/unlocking the configuration, Example for locking the configuration
- process
- automated underlay network provisioning, Process of automated underlay network provisioning
- monitoring and maintenance. See
- protocols and standards
- NETCONF, Configuring NETCONF, Protocols and standards
- NTP, Protocols and standards
- packet capture display filter keyword, Display filter keywords
- RMON, Protocols and standards
- sFlow, Protocols and standards
- SNMP configuration, Configuring SNMP
- SNMP versions, Protocol versions
- provision code (ACS), Configuring the provision code
- Puppet. See
- agent, Puppet agent
- aget, Puppet network framework
- configuration, Configuring Puppet, Configuring Puppet, Starting Puppet, Shutting down Puppet on the device, Puppet configuration example
- master, Puppet network framework, Puppet master
- network framework, Puppet network framework, Puppet master, Puppet agent
- Puppet resources, Puppet resources
- resources, Puppet resources
- shutting down Puppet, Shutting down Puppet on the device
- starting up Puppet, Starting Puppet
R
- RADIUS
- NQA client template, Configuring the RADIUS template
- NQA template configuration, RADIUS template configuration example
- real-time
- event manager. See
- reflector port
- Layer 2 remote port mirroring, Reflector port, egress port, and remote probe VLAN
- Layer 2 remote port mirroring (reflector port), Layer 2 remote port mirroring with reflector port configuration task list
- port mirroring remote source group reflector port, Configuring the reflector port for a remote source group
- regex match
- NETCONF data filtering, Example for filtering data with regular expression match
- NETCONF data filtering (column-based), Regular expression match filtering
- regular expression. Use regex
- relational
- packet capture display filter configuration (relational expression), Relational expression
- packet capture operator, Filter elements
- remote
- Layer 2 remote port mirroring, Configuring Layer 2 remote port mirroring
- Layer 2 remote port mirroring (egress port), Layer 2 remote port mirroring with egress port configuration task list
- Layer 2 remote port mirroring (reflector port), Layer 2 remote port mirroring with reflector port configuration task list
- Layer 3 port mirroring local group, Configuring local mirroring groups
- Layer 3 port mirroring local group monitor port, Configuring the monitor port for a local mirroring group
- Layer 3 port mirroring local group source CPU, Configuring source CPUs for a local mirroring group
- Layer 3 port mirroring local group source port, Configuring source ports for a local mirroring group
- Layer 3 remote port mirroring configuration, Configuring Layer 3 remote port mirroring
- packet capture configuration, Configuring remote packet capture, Remote packet capture configuration example
- packet capture mode, Packet capture modes
- port mirroring, Remote port mirroring
- port mirroring destination group, Configuring a remote destination group on the destination device
- port mirroring destination group creation, Creating a remote destination group
- port mirroring destination group monitor port, Configuring the monitor port for a remote destination group
- port mirroring destination group remote probe VLAN, Configuring the remote probe VLAN for a remote destination group
- port mirroring monitor port to remote probe VLAN assignment, Assigning the monitor port to the remote probe VLAN
- port mirroring source group, Configuring a remote source group on the source device
- port mirroring source group creation, Creating a remote source group
- port mirroring source group egress port, Configuring the egress port for a remote source group
- port mirroring source group reflector port, Configuring the reflector port for a remote source group
- port mirroring source group remote probe VLAN, Configuring the remote probe VLAN for a remote source group
- port mirroring source group source CPU, Configuring source CPUs for a remote source group
- port mirroring source group source ports, Configuring source ports for a remote source group
- Remote Network Monitoring. Use
- remote probe VLAN
- Layer 2 remote port mirroring, Reflector port, egress port, and remote probe VLAN
- port mirroring monitor port to remote probe VLAN assignment, Assigning the monitor port to the remote probe VLAN
- port mirroring remote destination group, Configuring the remote probe VLAN for a remote destination group
- port mirroring remote source group remote probe VLAN, Configuring the remote probe VLAN for a remote source group
- reporting
- NETCONF module report event subscription, Subscribing to module report events
- resources
- Chef, Chef resources
- Puppet, Puppet resources
- restrictions
- automated overlay network deployment, Configuration restrictions and guidelines
- automated underlay network provisioning, Configuration restrictions and guidelines
- EAA monitor policy configuration, Configuration restrictions and guidelines
- Layer 3 remote port mirroring local group monitor port configuration, Configuration restrictions and guidelines
- Layer 3 remote port mirroring local group source port configuration, Configuration restrictions and guidelines
- local port mirroring group monitor port configuration, Configuration restrictions and guidelines
- local port mirroring group source port configuration, Configuration restrictions and guidelines
- NTP configuration, Configuration restrictions and guidelines
- SNTP configuration, Configuration restrictions and guidelines
- SNTP configuration restrictions, Configuration restrictions and guidelines
- VCF fabric configuration, Configuration restrictions and guidelines
- retrieving
- NETCONF configuration data (all modules), All-module configuration data retrieval example
- NETCONF configuration data (Syslog module), Syslog configuration data retrieval example
- NETCONF data entry (interface table), Example for retrieving a data entry for the interface table
- NETCONF information, Retrieving NETCONF information
- NETCONF session information, Retrieving NETCONF session information
- NETCONF YANG file content, Retrieving YANG file content
- returning
- NETCONF CLI return, Returning to the CLI
- RMON
- alarm configuration, Configuring the RMON alarm function, Alarm function configuration example
- alarm group, Alarm group
- alarm group sample types, Sample types for the alarm group and the private alarm group
- configuration, Configuring RMON
- Ethernet statistics entry creation, Creating an RMON Ethernet statistics entry
- Ethernet statistics group, Statistics group
- Ethernet statistics group configuration, Ethernet statistics group configuration example
- event group, Event group
- Event MIB configuration, Configuring the Event MIB, Event MIB configuration task list
- Event MIB event creation, Creating an event
- Event MIB notification action configuration, Configuring a notification action for an event
- Event MIB object list configuration, Configuring Event MIB object lists
- Event MIB sampling configuration, Configuring Event MIB sampling
- Event MIB set action configuration, Configuring a set action for an event
- Event MIB trigger test configuration (Boolean), Boolean trigger test configuration example
- Event MIB trigger test configuration (existence), Existence trigger test configuration example
- Event MIB trigger test configuration (threshold), Threshold trigger test configuration example
- group, RMON groups
- history control entry creation, Creating an RMON history control entry
- history group, History group
- history group configuration, History group configuration example
- private alarm group, Private alarm group
- protocols and standards, Protocols and standards
- settings display, Displaying and maintaining RMON settings
- statistics configuration, Configuring the RMON statistics function
- rollback
- NETCONF save-point/begin operation, Performing the <save-point/begin> operation
- NETCONF save-point/commit operation, Performing the <save-point/commit> operation
- NETCONF save-point/end operation, Performing the <save-point/end> operation
- NETCONF save-point/get-commit-information operation, Performing the <save-point/get-commit-information> operation
- NETCONF save-point/get-commits operation, Performing the <save-point/get-commits> operation
- NETCONF save-point/rollback operation, Performing the <save-point/rollback> operation
- rolling back
- NETCONF configuration, Saving, rolling back, and loading the configuration
- NETCONF configuration (configuration file-based), Rolling back the configuration based on a configuration file
- NETCONF configuration (rollback point-based), Rolling back the configuration based on a rollback point
- routing
- automated VCF fabric provisioning and deployment, Automated VCF fabric configuration example
- IPv6 NTP client/server association mode, IPv6 NTP client/server mode configuration example
- IPv6 NTP multicast association mode (on switch), IPv6 NTP multicast mode configuration example
- IPv6 NTP symmetric active/passive association mode, IPv6 NTP symmetric active/passive mode configuration example
- NTP association mode, Configuring NTP association mode
- NTP broadcast association mode (on switch), NTP broadcast mode configuration example
- NTP broadcast mode+authentication (on switch), Configuration example for NTP broadcast mode with authentication
- NTP client/server association mode, NTP client/server mode configuration example
- NTP client/server mode+authentication, Configuration example for NTP client/server mode with authentication
- NTP configuration, Configuring NTP, Configuration task list, NTP configuration examples
- NTP multicast association mode (on switch), NTP multicast mode configuration example
- NTP symmetric active/passive association mode, NTP symmetric active/passive mode configuration example
- SNTP configuration, Configuration task list, Configuring SNTP, Configuration task list, SNTP configuration example
- VCF fabric configuration, VCF fabric configuration task list
- RPC
- CWMP RPC methods, RPC methods
- RTM
- EAA, RTM
- EAA configuration, Configuring EAA, EAA configuration examples
- rule
- information center log default output rules, Default output rules for logs
- SNMP access control (rule-based), Access control modes
- system information default output rules (diagnostic log), Default output rules for diagnostic logs
- system information default output rules (hidden log), Default output rules for hidden logs
- system information default output rules (security log), Default output rules for security logs
- system information default output rules (trace log), Default output rules for trace logs
- runtime
- EAA event monitor policy runtime, Runtime
S
- sampling
- Event MIB sampling configuration, Configuring Event MIB sampling
- Sampled Flow. Use
- sFlow counter sampling, Configuring counter sampling
- sFlow flow sampling configuration, Configuring flow sampling
- saving
- feature image-based packet capture to file, Saving captured packets to a file
- information center diagnostic logs (log file), Saving diagnostic logs to the diagnostic log file
- information center log (log file), Saving logs to the log file
- information center security logs (log file), Saving security logs to the security log file
- NETCONF configuration, Saving, rolling back, and loading the configuration, Saving the configuration, Example for saving the configuration
- NQA client history records, Configuring the saving of NQA history records
- packet capture file save, Saving captured packets to a file configuration example
- scheduling
- CWMP ACS connection initiation, Scheduling a connection initiation
- NQA client operation, Scheduling the NQA operation on the NQA client
- security
- information center security log file management, Managing the security log file
- information center security log management, Managing security logs
- information center security log save (log file), Saving security logs to the security log file
- information center security logs, Log types
- NTP, NTP security
- NTP access control rights, Configuring access control rights
- NTP authentication, NTP authentication, Configuring NTP authentication
- NTP broadcast mode authentication, Configuring NTP authentication in broadcast mode
- NTP client/server mode authentication, Configuring NTP authentication in client/server mode
- NTP multicast mode authentication, Configuring NTP authentication in multicast mode
- NTP symmetric active/passive mode authentication, Configuring NTP authentication in symmetric active/passive mode
- SNMP silence, SNMP silence
- SNTP authentication, Configuring SNTP authentication
- server
- Chef, Chef server
- NQA configuration, Configuring the NQA server
- NTP broadcast server configuration, Configuring the broadcast server
- NTP multicast server configuration, Configuring the multicast server
- SNTP configuration, Configuration task list, Configuring SNTP, Configuration task list, SNTP configuration example
- SNTP NTP server specification, Specifying an NTP server for the device
- service
- NETCONF configuration data retrieval (all modules), All-module configuration data retrieval example
- NETCONF configuration data retrieval (Syslog module), Syslog configuration data retrieval example
- NETCONF configuration load, Saving, rolling back, and loading the configuration
- NETCONF configuration rollback, Saving, rolling back, and loading the configuration
- NETCONF configuration save, Saving, rolling back, and loading the configuration
- NETCONF data entry retrieval (interface table), Example for retrieving a data entry for the interface table
- NETCONF edit-config operation, Performing the <edit-config> operation
- NETCONF get/get-bulk operation, Performing the <get>/<get-bulk> operation
- NETCONF get-config/get-bulk-config operation, Performing the <get-config>/<get-bulk-config> operation
- NETCONF operations, Performing service operations
- NETCONF parameter value change, Example for changing the value of a parameter
- session
- NETCONF session establishment, Establishing a NETCONF session
- NETCONF session idle timeout time, Setting the NETCONF session idle timeout time
- NETCONF session information retrieval, Retrieving NETCONF session information
- NETCONF session termination, Terminating another NETCONF session
- set operation
- SNMP, SNMP operations
- SNMP logging, Configuring SNMP logging
- setting
- information center log storage period, Setting the minimum storage period for logs
- NETCONF session idle timeout time, Setting the NETCONF session idle timeout time
- NTP packet DSCP value, Setting a DSCP value for NTP packets
- severity level (system information), Log levels
- sFlow
- agent+collector information configuration, Configuring the sFlow agent and sFlow collector information
- configuration, Configuring sFlow, sFlow configuration task list, sFlow configuration example
- counter sampling configuration, Configuring counter sampling
- display, Displaying and maintaining sFlow
- flow sampling configuration, Configuring flow sampling
- protocols and standards, Protocols and standards
- troubleshoot, Troubleshooting sFlow configuration
- troubleshoot remote collector cannot receive packets, The remote sFlow collector cannot receive sFlow packets
- silence (SNMP), SNMP silence
- Simple Network Management Protocol. Use
- Simplified NTP. See
- SNMP
- access control mode, Access control modes
- agent, SNMP framework
- agent notification, Configuring SNMP notifications
- basic parameter configuration, Configuring SNMP basic parameters
- configuration, Configuring SNMP
- Event MIB configuration, Configuring the Event MIB, Event MIB configuration task list
- Event MIB display, Displaying and maintaining the Event MIB
- Event MIB event creation, Creating an event
- Event MIB notification action configuration, Configuring a notification action for an event
- Event MIB object list configuration, Configuring Event MIB object lists
- Event MIB sampling configuration, Configuring Event MIB sampling
- Event MIB set action configuration, Configuring a set action for an event
- Event MIB SNMP notification enable, Enabling SNMP notifications for Event MIB
- Event MIB trigger test configuration, Configuring a trigger
- Event MIB trigger test configuration (Boolean), Configuring a Boolean trigger test, Boolean trigger test configuration example
- Event MIB trigger test configuration (existence), Configuring an existence trigger test, Existence trigger test configuration example
- Event MIB trigger test configuration (threshold), Configuring a threshold trigger test, Threshold trigger test configuration example
- FIPS compliance, FIPS compliance
- framework, SNMP framework
- Get operation, SNMP operations
- get operation, Configuring SNMP logging
- information center system log SNMP notification, Enabling SNMP notifications for system logs
- logging configuration, Configuring SNMP logging
- manager, SNMP framework
- MIB, SNMP framework, MIB and view-based MIB access control
- MIB view-based access control, MIB and view-based MIB access control
- notification configuration, Configuring SNMP notifications
- notification enable, Enabling SNMP notifications
- Notification operation, SNMP operations
- notification send parameters, Configuring the SNMP agent to send notifications to a host
- NQA client operation, Configuring the SNMP operation
- NQA operation configuration, SNMP operation configuration example
- protocol versions, Protocol versions
- RMON configuration, Configuring RMON
- set operation, Configuring SNMP logging
- Set operation, SNMP operations
- settings display, Displaying the SNMP settings
- silence, SNMP silence
- SNMPv1 basic parameter configuration, Configuring SNMPv1 or SNMPv2c basic parameters
- SNMPv1 configuration, SNMPv1/SNMPv2c configuration example
- SNMPv2c basic parameter configuration, Configuring SNMPv1 or SNMPv2c basic parameters
- SNMPv2c configuration, SNMPv1/SNMPv2c configuration example
- SNMPv3 basic parameter configuration, Configuring SNMPv3 basic parameters
- SNMPv1
- basic parameter configuration, Configuring SNMPv1 or SNMPv2c basic parameters
- configuration, SNMPv1/SNMPv2c configuration example
- Notification operation, SNMP operations
- notification send parameters, Configuring the SNMP agent to send notifications to a host
- protocol version, Protocol versions
- SNMPv2c
- basic parameter configuration, Configuring SNMPv1 or SNMPv2c basic parameters
- configuration, SNMPv1/SNMPv2c configuration example
- Notification operation, SNMP operations
- notification send parameters, Configuring the SNMP agent to send notifications to a host
- protocol version, Protocol versions
- SNMPv3
- basic parameter configuration, Configuring SNMPv3 basic parameters
- Event MIB object owner, Object owner
- Notification operation, SNMP operations
- notification send parameters, Configuring the SNMP agent to send notifications to a host
- protocol version, Protocol versions
- SNTP
- authentication, Configuring SNTP authentication
- configuration, Configuration task list, Configuring SNTP, Configuration task list, SNTP configuration example
- configuration restrictions, Configuration restrictions and guidelines, Configuration restrictions and guidelines
- display, Displaying and maintaining SNTP
- enable, Enabling the SNTP service
- NTP server specification, Specifying an NTP server for the device
- SOAP
- NETCONF message format, NETCONF message format
- NETCONF over SOAP configuration, Configuring NETCONF over SOAP
- source
- port mirroring source, Mirroring source
- port mirroring source device, Source device
- specifying
- CWMP ACS HTTPS SSL client policy, Specifying an SSL client policy for HTTPS connection to ACS
- NTP message source interface, Specifying the source interface for NTP messages
- SNTP NTP server, Specifying an NTP server for the device
- SSH
- NETCONF over SSH enable, Enabling NETCONF over SSH
- SSL
- CWMP ACS HTTPS SSL client policy, Specifying an SSL client policy for HTTPS connection to ACS
- NQA client template (SSL), Configuring the SSL template
- NQA template configuration, SSL template configuration example
- starting
- PMM 3rd party process, Starting a third-party process
- starvation detection (Linux kernel thread PMM), Configuring kernel thread starvation detection
- statistics
- NQA client statistics collection, Configuring the NQA statistics collection feature
- RMON configuration, Configuring RMON
- RMON Ethernet statistics entry, Creating an RMON Ethernet statistics entry
- RMON Ethernet statistics group, Statistics group
- RMON Ethernet statistics group configuration, Ethernet statistics group configuration example
- RMON history control entry, Creating an RMON history control entry
- RMON statistics configuration, Configuring the RMON statistics function
- sFlow agent+collector information configuration, Configuring the sFlow agent and sFlow collector information
- sFlow configuration, Configuring sFlow, sFlow configuration task list, sFlow configuration example
- sFlow counter sampling configuration, Configuring counter sampling
- sFlow flow sampling configuration, Configuring flow sampling
- stopping
- PMM 3rd party process, Stopping a third-party process
- storage
- information center log storage period, Setting the minimum storage period for logs
- subscribing
- NETCONF event notification, Subscribing to event notifications, Example for subscribing to event notifications
- NETCONF module report event, Subscribing to module report events
- NETCONF monitoring event, Subscribing to monitoring events
- NETCONF syslog event, Subscribing to syslog events
- suppressing
- information center duplicate log suppression, Enabling duplicate log suppression
- information center log suppression, Configuring log suppression for a module
- suspending
- EAA monitor policy, Suspending monitor policies
- switch
- module debug, Debugging information control switches
- screen output, Debugging information control switches
- switching
- automated VCF fabric provisioning and deployment, Automated VCF fabric configuration example
- VCF fabric configuration, VCF fabric configuration task list
- symmetric
- IPv6 NTP symmetric active/passive association mode, IPv6 NTP symmetric active/passive mode configuration example
- NTP symmetric active/passive association mode, Association modes, Configuring NTP in symmetric active/passive mode, Configuring NTP authentication in symmetric active/passive mode, NTP symmetric active/passive mode configuration example
- NTP symmetric active/passive mode dynamic associations max, Configuring the maximum number of dynamic associations
- synchronizing
- information center synchronous log output, Enabling synchronous information output
- NTP configuration, Configuring NTP, Configuration task list, NTP configuration examples
- SNTP configuration, Configuration task list, Configuring SNTP, Configuration task list, SNTP configuration example
- syslog
- NETCONF syslog event subscription, Subscribing to syslog events
- Syslog
- NETCONF configuration data retrieval (Syslog module), Syslog configuration data retrieval example
- system
- default output rules (diagnostic log), Default output rules for diagnostic logs
- default output rules (hidden log), Default output rules for hidden logs
- default output rules (security log), Default output rules for security logs
- default output rules (trace log), Default output rules for trace logs
- information center duplicate log suppression, Enabling duplicate log suppression
- information center interface link up/link down log generation, Disabling an interface from generating link up or link down logs
- information center log destinations, Log destinations
- information center log levels, Log levels
- information center log output (console), Outputting logs to the console
- information center log output (log buffer), Outputting logs to the log buffer
- information center log output (log host), Outputting logs to log hosts
- information center log output (monitor terminal), Outputting logs to the monitor terminal
- information center log output configuration (console), Configuration example for outputting logs to the console
- information center log output configuration (Linux log host), Configuration example for outputting logs to a Linux log host
- information center log output configuration (UNIX log host), Configuration example for outputting logs to a UNIX log host
- information center log save (log file), Saving logs to the log file
- information center log suppression, Configuring log suppression for a module
- information center log types, Log types
- information center security log file management, Managing the security log file
- information center security log management, Managing security logs
- information center security log save (log file), Saving security logs to the security log file
- information center synchronous log output, Enabling synchronous information output
- information center system log SNMP notification, Enabling SNMP notifications for system logs
- information log formats, Log formats
- log default output rules, Default output rules for logs
- system administration
- debugging, Using ping, tracert, and system debugging
- feature module debug, Debugging a feature module
- ping, Using ping, tracert, and system debugging
- ping address reachability, Ping example
- ping command, Ping
- ping network connectivity test, Using a ping command to test network connectivity
- system debugging, System debugging
- tracert, Using ping, tracert, and system debugging, Tracert
- tracert node failure identification, Using a tracert command to identify failed or all nodes in a path, Tracert example
- system debugging
- module debugging switch, Debugging information control switches
- screen output switch, Debugging information control switches
- system information
- information center configuration, Configuring the information center, Information center configuration task list, Information center configuration examples
T
- Tcl
- EAA configuration, Configuring EAA, EAA configuration examples
- EAA monitor policy configuration, Configuring a monitor policy by using Tcl, Tcl-defined policy configuration example
- TCP
- NQA client operation, Configuring the TCP operation
- NQA client template, Configuring the TCP template
- NQA client template (TCP half open), Configuring the TCP half open template
- NQA operation configuration, TCP operation configuration example
- NQA template configuration, TCP template configuration example
- NQA template configuration (half open), TCP half open template configuration example
- template
- NQA client template (DNS), Configuring the DNS template
- NQA client template (FTP), Configuring the FTP template
- NQA client template (HTTP), Configuring the HTTP template
- NQA client template (HTTPS), Configuring the HTTPS template
- NQA client template (ICMP), Configuring the ICMP template
- NQA client template (RADIUS), Configuring the RADIUS template
- NQA client template (SSL), Configuring the SSL template
- NQA client template (TCP half open), Configuring the TCP half open template
- NQA client template (TCP), Configuring the TCP template
- NQA client template (UDP), Configuring the UDP template
- NQA client template configuration, Configuring NQA templates on the NQA client
- NQA client template optional parameters, Configuring optional parameters for the NQA template
- NQA template configuration (DNS), DNS template configuration example
- NQA template configuration (FTP), FTP template configuration example
- NQA template configuration (HTTP), HTTP template configuration example
- NQA template configuration (HTTPS), HTTPS template configuration example
- NQA template configuration (ICMP), ICMP template configuration example
- NQA template configuration (RADIUS), RADIUS template configuration example
- NQA template configuration (SSL), SSL template configuration example
- NQA template configuration (TCP half open), TCP half open template configuration example
- NQA template configuration (TCP), TCP template configuration example
- NQA template configuration (UDP), UDP template configuration example
- template file
- automated underlay network provisioning, Template file
- terminating
- NETCONF session, Terminating another NETCONF session
- testing
- Event MIB trigger test (Boolean), Trigger test
- Event MIB trigger test (existence), Trigger test
- Event MIB trigger test (threshold), Trigger test
- Event MIB trigger test configuration, Configuring a trigger
- Event MIB trigger test configuration (Boolean), Configuring a Boolean trigger test, Boolean trigger test configuration example
- Event MIB trigger test configuration (existence), Configuring an existence trigger test, Existence trigger test configuration example
- Event MIB trigger test configuration (threshold), Configuring a threshold trigger test, Threshold trigger test configuration example
- ping network connectivity test, Using a ping command to test network connectivity
- threshold
- Event MIB trigger test, Threshold test
- Event MIB trigger test configuration, Configuring a threshold trigger test, Threshold trigger test configuration example
- NQA client threshold monitoring, Threshold monitoring, Configuring threshold monitoring
- NQA operation reaction entry, Reaction entry
- NQA operation support accumulate type, Threshold types
- NQA operation support average type, Threshold types
- NQA operation support consecutive type, Threshold types
- NQA operation triggered action none, Triggered actions
- NQA operation triggered action trap-only, Triggered actions
- NQA operation triggered action trigger-only, Triggered actions
- time
- NTP configuration, Configuring NTP, Configuration task list, NTP configuration examples
- NTP local clock as reference source, Configuring the local clock as a reference source
- SNTP configuration, Configuration task list, Configuring SNTP, Configuration task list, SNTP configuration example
- timeout
- NETCONF session idle timeout time, Setting the NETCONF session idle timeout time
- timer
- CWMP ACS close-wait timer, Setting the close-wait timer
- SNMP silence, SNMP silence
- topology
- VCF fabric topology, VCF fabric topology
- VCF fabric topology discovery, Topology discovery
- traceroute. See
- tracert
- IP address retrieval, Tracert
- node failure detection, Tracert, Using a tracert command to identify failed or all nodes in a path, Tracert example
- NQA client operation (UDP tracert), Configuring the UDP tracert operation
- NQA operation configuration (UDP tracert), UDP tracert operation configuration example
- system maintenance, Using ping, tracert, and system debugging
- tracing
- information center trace log file max size, Configuring the maximum size of the trace log file
- Track
- EAA event monitor policy configuration, Track event monitor policy configuration example
- NQA client+Track collaboration, Configuring the collaboration feature
- NQA collaboration, Collaboration
- NQA collaboration configuration (on switch), NQA collaboration configuration example
- traffic
- NQA client operation (voice), Configuring the voice operation
- RMON configuration, Configuring RMON
- sFlow agent+collector information configuration, Configuring the sFlow agent and sFlow collector information
- sFlow configuration, Configuring sFlow, sFlow configuration task list, sFlow configuration example
- sFlow counter sampling configuration, Configuring counter sampling
- sFlow flow sampling configuration, Configuring flow sampling
- trapping
- Event MIB SNMP notification enable, Enabling SNMP notifications for Event MIB
- information center system log SNMP notification, Enabling SNMP notifications for system logs
- SNMP notification, Configuring SNMP notifications
- triggering
- Event MIB trigger test configuration, Configuring a trigger
- Event MIB trigger test configuration (Boolean), Configuring a Boolean trigger test, Boolean trigger test configuration example
- Event MIB trigger test configuration (existence), Configuring an existence trigger test, Existence trigger test configuration example
- Event MIB trigger test configuration (threshold), Configuring a threshold trigger test, Threshold trigger test configuration example
- NQA operation threshold triggered action none, Triggered actions
- NQA operation threshold triggered action trap-only, Triggered actions
- NQA operation threshold triggered action trigger-only, Triggered actions
- troubleshooting
- sFlow, Troubleshooting sFlow configuration
- sFlow remote collector cannot receive packets, The remote sFlow collector cannot receive sFlow packets
U
- UDP
- IPv6 NTP client/server association mode, IPv6 NTP client/server mode configuration example
- IPv6 NTP multicast association mode (on switch), IPv6 NTP multicast mode configuration example
- IPv6 NTP symmetric active/passive association mode, IPv6 NTP symmetric active/passive mode configuration example
- NQA client operation (UDP echo), Configuring the UDP echo operation
- NQA client operation (UDP jitter), Configuring the UDP jitter operation
- NQA client operation (UDP tracert), Configuring the UDP tracert operation
- NQA client template, Configuring the UDP template
- NQA operation configuration (UDP echo), UDP echo operation configuration example
- NQA operation configuration (UDP jitter), UDP jitter operation configuration example
- NQA operation configuration (UDP tracert), UDP tracert operation configuration example
- NQA template configuration, UDP template configuration example
- NTP association mode, Configuring NTP association mode
- NTP broadcast association mode (on switch), NTP broadcast mode configuration example
- NTP broadcast mode+authentication (on switch), Configuration example for NTP broadcast mode with authentication
- NTP client/server association mode, NTP client/server mode configuration example
- NTP client/server mode+authentication, Configuration example for NTP client/server mode with authentication
- NTP configuration, Configuring NTP, Configuration task list, NTP configuration examples
- NTP multicast association mode (on switch), NTP multicast mode configuration example
- NTP symmetric active/passive association mode, NTP symmetric active/passive mode configuration example
- sFlow configuration, Configuring sFlow, sFlow configuration task list, sFlow configuration example
- underlay network
- automated provisioning, Automated underlay network provisioning
- UNIX
- information center log host output configuration, Configuration example for outputting logs to a UNIX log host
- unlocking
- NETCONF configuration, Locking/unlocking the configuration, Example for locking the configuration
- user
- PMM Linux user, Monitoring and maintaining processes
V
- value
- NETCONF parameter value change, Example for changing the value of a parameter
- variable
- EAA environment variable configuration (user-defined), Configuring a user-defined EAA environment variable
- EAA event monitor policy environment (user-defined), User-defined variables
- EAA event monitor policy environment system-defined (event-specific), System-defined variables
- EAA event monitor policy environment system-defined (public), System-defined variables
- EAA event monitor policy environment variable, EAA environment variables
- EAA monitor policy configuration (CLI-defined+environment variables), CLI-defined policy with EAA environment variables configuration example
- packet capture, Filter elements
- VCF fabric
- automated overlay network deployment, Automated overlay network deployment, Configuring automated overlay network deployment
- automated provisioning and deployemtn, Automated VCF fabric provisioning and deployment
- automated underlay network provisioning, Automated underlay network provisioning, Configuring automated underlay network provisioning
- configuration, VCF fabric configuration task list
- display, Displaying and maintaining VCF fabric
- maintain, Displaying and maintaining VCF fabric
- Neutron component, Neutron concepts and components
- Neutron concepts, Neutron concepts and components
- Neutron deployment, Neutron deployment
- overview, Configuring VCF fabric
- topology, VCF fabric topology
- VCF fabric confiugration
- guidelines, Configuration restrictions and guidelines
- restrictions, Configuration restrictions and guidelines
- VCF fabric topology discovery, Topology discovery
- enable, Enabling VCF fabric topology discovery
- view
- SNMP access control (view-based), Access control modes
- Virtual converged framework. Use
- VLAN
- flow mirroring configuration, Configuring flow mirroring, Flow mirroring configuration task list, Flow mirroring configuration example
- flow mirroring QoS policy application, Applying a QoS policy to a VLAN
- Layer 2 remote port mirroring (egress port), Layer 2 remote port mirroring with egress port configuration task list
- Layer 2 remote port mirroring (reflector port), Layer 2 remote port mirroring with reflector port configuration task list
- Layer 2 remote port mirroring configuration, Configuring Layer 2 remote port mirroring
- Layer 3 remote port mirroring configuration, Configuring Layer 3 remote port mirroring
- local port mirroring configuration, Configuring local port mirroring
- local port mirroring group monitor port, Configuring the monitor port for the local mirroring group
- local port mirroring group source port, Configuring source ports for the local mirroring group
- packet capture filter configuration (vlan vlan_id expression), The vlan vlan_id expression
- port mirroring configuration, Configuring port mirroring, Port mirroring configuration examples
- port mirroring remote probe VLAN, Reflector port, egress port, and remote probe VLAN
- port mirroring remote source group remote probe VLAN, Configuring the remote probe VLAN for a remote source group
- VCF fabric overview, Configuring VCF fabric
- voice
- NQA client operation, Configuring the voice operation
- NQA operation configuration, Voice operation configuration example
- VXLAN
- automated VCF fabric provisioning and deployment, Automated VCF fabric configuration example
- VCF fabric overview, Configuring VCF fabric
X
- XML
- NETCONF capability exchange, Exchanging capabilities
- NETCONF configuration, Configuring NETCONF, NETCONF configuration task list
- NETCONF data filtering, Filtering data
- NETCONF data filtering (conditional match), Example for filtering data by conditional match
- NETCONF data filtering (regex match), Example for filtering data with regular expression match
- NETCONF message format, NETCONF message format
- NETCONF structure, NETCONF structure
- NETCONF XML view, Entering XML view
- XSD
- NETCONF message format, NETCONF message format