Outputting logs to log hosts
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable the information center. | info-center enable | By default, the information center is enabled. |
3. Configure an output rule for log hosts. | info-center source { module-name | default } { console | monitor | logbuffer | logfile | loghost } { deny | level severity } | For information about default output rules, see "Default output rules for logs." |
4. (Optional.) Specify the source IP address for output logs. | info-center loghost source interface-type interface-number | By default, the source IP address of output logs is the primary IP address of the outgoing interface. |
5. (Optional.) Configure the timestamp format. | info-center timestamp loghost { date | iso [ with-timezone ] | no-year-date | none } | The default timestamp format is date. |
6. Specify a log host and configure related parameters. | info-center loghost [ vpn-instance vpn-instance-name ] { hostname | ipv4-address | ipv6 ipv6-address } [ port port-number ] [ facility local-number ] | By default, no log hosts or related parameters are specified. The value for the port-number argument must be the same as the value configured on the log host. Otherwise, the log host cannot receive logs. You can specify a maximum of 20 log hosts. |