Outputting logs to the monitor terminal
Monitor terminals refer to terminals that log in to the device through the AUX, VTY, or TTY line.
To output logs to the monitor terminal:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable the information center. | info-center enable | By default, the information center is enabled. |
3. Configure an output rule for the monitor terminal. | info-center source { module-name | default } { console | monitor | logbuffer | logfile | loghost } { deny | level severity } | For information about default output rules, see "Default output rules for logs." |
4. (Optional.) Configure the timestamp format. | info-center timestamp { boot | date | none } | The default timestamp format is date. |
5. Return to user view. | quit | N/A |
6. Enable log output to the monitor terminal. | terminal monitor | By default, log output to the monitor terminal is enabled. |
7. Enable the display of debug information on the current terminal. | terminal debugging | By default, the display of debug information is disabled on the current terminal. |
8. (Optional.) Set the lowest level of logs that can be output to the monitor terminal. | terminal logging level severity | The default setting is 6 (informational). |