[x]

Configuring Layer 2 remote port mirroring > Layer 2 remote port mirroring with egress port configuration task list

 

 Next

Layer 2 remote port mirroring with egress port configuration task list

Tasks at a glance

(Required.) Configuring a remote destination group on the destination device:

  1. Creating a remote destination group

  2. Configuring the monitor port for a remote destination group

  3. Configuring the remote probe VLAN for a remote destination group

  4. Assigning the monitor port to the remote probe VLAN

(Required.) Configuring a remote source group on the source device:

  1. Creating a remote source group

  2. Perform at least one of the following tasks:

  3. Configuring the egress port for a remote source group

  4. Configuring the remote probe VLAN for a remote source group

prev

 

up

 next

Layer 2 remote port mirroring with reflector port configuration task list 

home

 Configuring a remote destination group on the destination device

© Copyright 2017 Hewlett Packard Enterprise Development LP