Tcl-defined policy configuration example

As shown in Figure 79, use Tcl to create a monitor policy on the Device. This policy must meet the following requirements:

• EAA sends the log message "rtm_tcl_test is running" when a command that contains the display this string is entered.

• The system executes the command only after it executes the policy successfully.

# Edit a Tcl script file (rtm_tcl_test.tcl, in this example) for EAA to send the message "rtm_tcl_test is running" when a command that contains the display this string is executed.

::comware::rtm::event_register cli sync mode execute pattern display this user-role network-admin
::comware::rtm::action syslog priority 1 facility local4 msg rtm_tcl_test is running

# Download the Tcl script file from the TFTP server at 1.2.1.1.

<Sysname> tftp 1.2.1.1 get rtm_tcl_test.tcl

# Create Tcl-defined policy test and bind it to the Tcl script file.

<Sysname> system-view
[Sysname] rtm tcl-policy test rtm_tcl_test.tcl
[Sysname] quit

# Display information about the policy.

<Sysname> display rtm policy registered
Total number: 1
Type  Event      TimeRegistered       PolicyName
TCL   CLI        Aug 29 14:54:50 2013 test

# Enable the information center to output log messages to the current monitoring terminal.

<Sysname> terminal monitor

# Execute the display this command. Verify that the system displays the rtm_tcl_test is running message and a message that the policy is being successfully executed.

<Sysname> display this
#
return
<Sysname>%Jun  4 15:02:30:354 2013 Sysname RTM/1/RTM_ACTION: rtm_tcl_test is running
%Jun  4 15:02:30:382 2013 Sysname RTM/6/RTM_POLICY: TCL policy test is running successfully.