CLI event monitor policy configuration example

Configure a policy from the CLI to monitor the event that occurs when a question mark (?) is entered at the command line that contains letters and digits.

When the event occurs, the system executes the command and sends the log message "hello world" to the information center.

# Create CLI-defined policy test and enter its view.

<Sysname> system-view
[Sysname] rtm cli-policy test

# Add a CLI event that occurs when a question mark (?) is entered at any command line that contains letters and digits.

[Sysname-rtm-test] event cli async mode help pattern [a-zA-Z0-9]

# Add an action that sends the message "hello world" with a priority of 4 from the logging facility local3 when the event occurs.

[Sysname-rtm-test] action 0 syslog priority 4 facility local3 msg “hello world”

# Add an action that enters system view when the event occurs.

[Sysname-rtm-test] action 2 cli system-view

# Add an action that creates VLAN 2 when the event occurs.

[Sysname-rtm-test] action 3 cli vlan 2

# Set the policy runtime to 2000 seconds. The system stops executing the policy and displays an execution failure message if it fails to complete policy execution within 2000 seconds.

[Sysname-rtm-test] running-time 2000

# Specify the network-admin user role for executing the policy.

[Sysname-rtm-test] user-role network-admin

# Enable the policy.

[Sysname-rtm-test] commit

# Display information about the policy.

[Sysname-rtm-test] display rtm policy registered
Total number: 1
Type  Event      TimeRegistered       PolicyName
CLI   CLI        Aug 29 14:56:50 2013 test

# Enable the information center to output log messages to the current monitoring terminal.

[Sysname-rtm-test] return
<Sysname> terminal monitor

# Enter a question mark (?) at a command line that contains a letter d. Verify that the system displays the "hello world" message and a policy successfully executed message on the terminal screen.

<Sysname> d?
  debugging
  delete
  diagnostic-logfile
  dir
  display

<Sysname>d%May  7 02:10:03:218 2013 Sysname RTM/4/RTM_ACTION: "hello world"
%May  7 02:10:04:176 2013 Sysname RTM/6/RTM_POLICY: CLI policy test is running successfully.