Configuring the provision code
The ACS can use the provision code to identify services assigned to each CPE. For correct configuration deployment, make sure the same provision code is configured on the CPE and the ACS. For information about the support of your ACS for provision codes, see the ACS documentation.
To configure the provision code:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter CWMP view. | cwmp | N/A |
3. Configure the provision code. | cwmp cpe provision-code provision-code | The default provision code is PROVISIONINGCODE. |