Configuring ACS authentication parameters
To protect the CPE against unauthorized access, configure a CPE username and password for ACS authentication. When an ACS initiates a connection to the CPE, the ACS must provide the correct username and password.
NOTE: The password setting is optional. You can specify only a username for authentication. | ||
To configure ACS authentication parameters:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter CWMP view. | cwmp | N/A |
3. Configure the username for authentication to the CPE. | cwmp cpe username username | By default, no username has been configured for authentication to the CPE. |
4. (Optional.) Configure the password for authentication to the CPE. | cwmp cpe password { cipher | simple } string | By default, no password has been configured for authentication to the CPE. |