Example for filtering data by conditional match

Retrieve data in the Name column with the ifindex value not less than 5000 in the Interfaces table under the Ifmgr module.

# Enter XML view.

<Sysname> xml

# Notify the device of the NETCONF capabilities supported on the client.

<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <capabilities>
    <capability>
            urn:ietf:params:netconf:base:1.0
    </capability>
  </capabilities>
</hello>

# Retrieve data in the Name column with the ifindex value not less than 5000 in the Interfaces table under the Ifmgr module.

<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" xmlns:hp="http://www.hp.com/netconf/base:1.0">
  <get>
    <filter type="subtree">
      <top xmlns="http://www.hp.com/netconf/data:1.0">
        <Ifmgr>
          <Interfaces>
            <Interface>
              <IfIndex hp:match="notLess:5000"/>
              <Name/>
            </Interface>
          </Interfaces>
        </Ifmgr>
      </top>
    </filter>
  </get>
</rpc>

If the client receives the following text, the operation is successful:

<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" xmlns:hp="http://www.hp.com/netconf/base:1.0" message-id="100">
    <data>
        <top xmlns="http://www.hp.com/netconf/data:1.0">
            <Ifmgr>
                <Interfaces>
                    <Interface>
                        <IfIndex>7241</IfIndex>
                        <Name>NULL0</Name>
                    </Interface>
                </Interfaces>
            </Ifmgr>
        </top>
    </data>
</rpc-reply>