Configuring the DLSw operation
The DLSw operation measures the response time of a DLSw device.
To configure the DLSw operation:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Create an NQA operation and enter NQA operation view. | nqa entry admin-name operation-tag | By default, no NQA operations exist. |
3. Specify the DLSw type and enter its view. | type dlsw | N/A |
4. Specify the destination IP address of probe packets. | destination ip ip-address | By default, no destination IP address is specified. |
5. (Optional.) Specify the source IP address of probe packets. | source ip ip-address | By default, the packets take the primary IP address of the output interface as their source IP address. The source IP address must be the IP address of a local interface, and the interface must be up. Otherwise, no probe packets can be sent out. |