link-aggregation management-port

Use link-aggregation management-port to specify a member port in an aggregation group as a management port.

Use undo link-aggregation management-port to restore the default.

Syntax

link-aggregation management-port

undo link-aggregation management-port

Default

An interface does not act as a management port in its aggregation group.

Views

Layer 2 Ethernet interface view

Predefined user roles

network-admin

Usage guidelines

You can use this command before the Layer 2 Ethernet interface is assigned to an aggregation group. However, the management port setting will take effect only after the interface is assigned to an aggregation group.

An aggregation group can have only one management port. If you specify multiple ports in an aggregation group as management ports, the system chooses the port with the lowest port number as the management port.

Examples

# Configure Ten-GigabitEthernet 1/0/1 as the management port in its aggregation group.

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] link-aggregation management-port