Configuring a port-specific load sharing mode

Before you configure a port-specific load sharing mode, make sure you have bound a minimum of one physical interface to the IRF port.

To configure a port-specific load sharing mode for an IRF port:

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter IRF port view.

irf-port member-id/irf-port-number

N/A

3. Configure the port-specific load sharing mode.

irf-port load-sharing mode { destination-ip | destination-mac | source-ip | source-mac } *

By default, the global IRF link load sharing mode is used.

If you execute this command multiple times, the most recent configuration takes effect.