Enabling logging for BGP route flapping
This feature enables BGP to generate logs for BGP route flappings that trigger log generation. The generated logs are sent to the information center. For the logs to be output correctly, you must also configure information center on the device. For more information about the information center, see Network Management and Monitoring Configuration Guide.
To enable logging for BGP route flapping:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter BGP VPNv4 address family view or BGP-VPN VPNv4 address family view. |
| N/A |
3. Enable logging for BGP route flapping. | log-route-flap monitor-time monitor-count [ log-count-limit | route-policy route-policy-name ] * | By default, logging for BGP route flapping is disabled. |