spbm timer lsp
Use spbm timer lsp to configure the minimum LSP transmit interval on an interface and specify the maximum number of LSPs sent at each interval.
Use undo spbm timer lsp to restore the default.
Syntax
spbm timer lsp time [ count count ]
undo spbm timer lsp
Default
The minimum LSP transmit interval is 33 milliseconds. A maximum of five LSPs can be sent at each interval.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
time: Specifies the minimum LSP transmit interval in the range of 1 to 1000 milliseconds.
count: Specifies the maximum number of LSPs that can be sent at each interval. The value range is 1 to 1000.
Usage guidelines
Use this command to control ISIS-SPB traffic on a circuit.
Before the minimum interval expires, newly generated LSP updates must wait in queue before they can be sent out.
Examples
# Set the minimum LSP transmit interval to 500 milliseconds on FortyGigE 1/0/1.
<Sysname> system-view [Sysname] interface fortygige 1/0/1 [Sysname-FortyGigE1/0/1] spbm timer lsp 500