display spbm unicast-pw
Use display spbm unicast-pw to display unicast PWs.
Syntax
display spbm unicast-pw [ i-sid i-sid ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
i-sid i-sid: Specifies an I-SID in the range of 255 to 16777215. If you do not specify an I-SID, the command displays unicast PW information for all I-SIDs.
count: Displays the total number of unicast PWs. If you do not specify this keyword, the command displays unicast PW information.
Usage guidelines
PWs are set up between BEBs. The unicast PW table is empty on BCBs.
Examples
# Display all unicast PWs.
<Sysname> display spbm unicast-pw System ID I-SID B-MAC B-VLAN Port 000f.e201.0101 300 000f-e201-0101 100 FGE1/0/1 000f.e201.0102 300 000f-e201-0102 100 FGE1/0/2
Table 28: Command output
Field | Description |
---|---|
System ID | System ID of the remote BEB. |
I-SID | SPBM VSI identifier. |
B-MAC | Unicast B-MAC of the remote BEB. |
B-VLAN | B-VLAN to be encapsulated for frames to be tunneled. |
Port | Outgoing interface. |
# Display the total number of unicast PWs.
<Sysname> display spbm unicast-pw count Total entries: 2