display spbm unicast-fdb count
Use display spbm unicast-fdb count to display the number of SPBM unicast FDB entries.
Syntax
display spbm unicast-fdb [ b-mac mac-address | b-vlan vlan-id | system-id system-id ] count
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
b-mac mac-address: Specifies a B-MAC address in H-H-H format. You can omit the consecutive 0s at the beginning of each segment. For example, you can enter f-e2-1 for 000f-00e2-0001. If you specify a B-MAC, the command displays the total number of entries for the B-MAC.
b-vlan vlan-id: Specifies a B-VLAN by its VLAN ID in the range of 1 to 4094. If you specify a B-VLAN, the command displays the total number of unicast FDB entries for the B-VLAN.
system-id system-id: Specifies a system ID in XXXX.XXXX.XXXX format. If you specify a system ID, the command displays unicast FDB entries for the system ID.
Usage guidelines
This command displays the total number of SPBM unicast FDB entries if you execute the command without any parameters.
Examples
# Display the total number of SPBM unicast FDB entries.
<Sysname> display spbm unicast-fdb count Total entries: 2