display spbm multicast-fdb
Use display spbm multicast-fdb to display SPBM multicast FDB entries.
Syntax
display spbm multicast-fdb [ b-vlan vlan-id | i-sid i-sid | system-id system-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
b-vlan vlan-id: Specifies a B-VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a B-VLAN, the command displays multicast FDB entries for all B-VLANs.
i-sid i-sid: Specifies an I-SID in the range of 255 to 16777215. If you do not specify an I-SID, the command displays multicast FDB entries for all I-SIDs.
system-id system-id: Specifies a system ID in XXXX.XXXX.XXXX format. If you do not specify a system ID, the command displays multicast FDB entries for all system IDs.
Usage guidelines
The SPBM multicast FDB contains multicast routes that ISIS-SPB calculates based on the SPBM LSDB.
If you do not specify any parameters, the command displays all multicast FDB entries.
Examples
# Display all SPBM multicast FDB entries.
<Sysname> display spbm multicast-fdb Flags: E-Egress T-Transit System ID MAC address B-VLAN Flags Port 0011.2200.de01 9334-6900-03e8 7 T FGE1/0/1 0011.2200.de01 9334-6900-0190 4 T FGE1/0/2 0011.2200.de01 9334-6900-01f4 5 T FGE1/0/3
Table 17: Command output
Field | Description |
---|---|
MAC address | Multicast MAC address. |
Flags | Forwarding actions:
If this field displays both flags, the device performs both actions. |
Port | Outgoing interfaces. This field displays N/A if no outgoing interfaces are available. |