display spbm ect-migration i-sid

Use display spbm ect-migration i-sid to display ECT migration information for an I-SID.

Syntax

display spbm ect-migration i-sid i-sid [ standby slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

i-sid: Specifies an I-SID in the range of 255 to 16777215.

standby slot slot-number: Specifies a subordinate device by its IRF member ID. If you do not specify a subordinate device, the command displays information for the master device.

Examples

# Display ECT migration information for I-SID 300.

<Sysname> display spbm ect-migration i-sid 300
ECT            B-VLAN    T    R
00-80-c2-01    1         0    1

Table 11: Command output

Field	Description
ECT	ECT algorithm.
B-VLAN	B-VLAN assigned to the I-SID.
T	Transmit (T) bit identifies the device's transmitter status in the multicast group for the I-SID: 1—T bit set. The device is a transmitter. If tandem replication is used, the BEB sets the T bit. 0—T bit not set. The device is not a transmitter. If head-end replication is used, the BEB does not set the T bit.
R	Receive (R) bit identifies the device's receiver status in the multicast group for the I-SID: 1—R bit set. The device is a receiver. 0—R bit not set. The device is not a receiver.

prev	up	next
display spbm ect	home	display spbm fast-channel statistics