display spbm b-vlan
Use display spbm b-vlan to display ECT algorithm information for B-VLANs.
Syntax
display spbm b-vlan [vlan-id ] [ standby slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan-id: Specifies a B-VLAN ID in the range of 1 to 4094. If you do not specify a B-VLAN ID, the command displays ECT algorithm information for all B-VLANs.
standby slot slot-number: Specifies a subordinate device by its IRF member ID. If you do not specify a subordinate device, the command displays information for the master device.
Examples
# Display ECT algorithm information for all B-VLANs.
<Sysname> display spbm b-vlan B-VLAN 1: Mode: SPBM Local use: Yes Remote use: No ECT-Index: 1 Algorithm: 00-80-c2-01 Mask: 0x00 I-SID list: 300-302, 305, 309 B-VLAN 2: Mode: SPBM Local use: Yes Remote use: No ECT-Index: 1 Algorithm: 00-80-c2-01 Mask: 0x00 I-SID list: 400-402, 404
Table 5: Command output
Field | Description |
---|---|
Mode | System operating mode. This field displays SPBM for an SPBM-enabled device. |
Local use | Availability of the B-VLAN for transmitting traffic at the local end:
|
Remote use | Availability of the B-VLAN for transmitting traffic at the remote end:
|
ECT-Index | ECT algorithm index. |
Algorithm | ECT algorithm content. |
Mask | ECT algorithm mask. |
I-SID list | I-SIDs mapped to the B-VLAN on the local device. This field displays N/A if no I-SIDs are mapped to the B-VLAN. |