circuit-cost
Use circuit-cost to configure a global SPBM link metric value.
Use undo circuit-cost to restore the default.
Syntax
circuit-cost value
undo circuit-cost
Default
No global SPBM link metric value is configured.
Views
SPBM view
Predefined user roles
network-admin
Parameters
value: Specifies a link metric value in the range of 1 to 16777215.
Usage guidelines
The following methods are available for you to assign a link metric value to an interface:
Setting an interface-specific value in interface view.
Setting a global value in SPBM view. This global value applies to all SPBM-enabled interfaces.
Setting a bandwidth reference for the system to calculate a value automatically for the interface.
The system chooses a link metric value for an interface in order of interface-specific value, global value, and autocalculated value.
Examples
# Set the global SPBM link metric value to 11.
<Sysname> system-view [Sysname] spbm [Sysname-spbm] circuit-cost 11
Related commands
bandwidth-reference
spbm cost