display ip interface brief

Use display ip interface brief to display brief IP configuration information for the specified Layer 3 interface or all Layer 3 interfaces.

Syntax

display ip interface [ interface-type [ interface-number ] ] brief

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface-type: Specifies the interface type.

interface-number: Specifies the interface number.

Usage guidelines

Use the display ip interface brief command to display brief IP configuration information, including the state, IP address, and description of the physical and link layer protocols, for the specified Layer 3 interface or all Layer 3 interfaces.

If you do not specify the interface type and interface number, the command displays the brief IP configuration information for all Layer 3 interfaces.

If you specify only the interface type, the command displays the brief IP configuration information for all Layer 3 interfaces of the specified type.

If you specify both the interface type and interface number, the command displays the brief IP configuration information for the specified interface.

Examples

# Display brief IP configuration information for VLAN interfaces.

<Sysname> display ip interface vlan-interface brief
*down: administratively down                                                    
(s): spoofing (l): loopback
Interface                     Physical Protocol IP Address      Description     
Vlan10                        down     down     6.6.6.1         Vlan-inte...    
Vlan2                         down     down     7.7.7.1         Vlan-inte...

Table 4: Command output

Field	Description
*down: administratively down	The interface is administratively shut down with the shutdown command.
(s) : spoofing	Spoofing attribute of the interface. It indicates that an interface might have no link present even when its link layer protocol is up or the link is established only on demand.
Interface	Interface name.
Physical	Physical state of the interface: down—The interface is administratively shut down with the shutdown* command. down—The interface is administratively up but its physical state is down (possibly because of poor connection or line failure). up—Both the administrative and physical states of the interface are up.
Protocol	Link layer protocol state of the interface: down—The protocol state of the interface is down (typically when no IP address is configured for the interface). up—The protocol state of the interface is up. up(s)—The protocol state of the interface is up (spoofing).
IP Address	IP address of the interface. If no IP address is configured, unassigned is displayed.
Description	Interface description information. A maximum of 12 characters can be displayed. If there are more than 12 characters, only the first 9 characters are displayed.

Related commands

display ip interface
ip address

prev	up	next
display ip interface	home	ip address