bfd multi-hop min-transmit-interval

Use bfd multi-hop min-transmit-interval to set the minimum interval for transmitting multihop BFD control packets.

Use undo bfd multi-hop min-transmit-interval to restore the default.

Syntax

bfd multi-hop min-transmit-interval value

undo bfd multi-hop min-transmit-interval

Default

The minimum interval for transmitting multihop BFD control packets is 400 milliseconds.

Views

System view

Predefined user roles

network-admin

Parameters

value: Specifies the minimum interval for transmitting multihop BFD control packets, in the range of 100 to 1000 milliseconds.

Usage guidelines

Use this command to make sure that the BFD packet sending rate does not exceed the device capability. The actual BFD control packet transmitting interval on the local end is the greater value between the minimum interval for transmitting BFD control packets on the local end and the minimum interval for receiving BFD control packets on the peer end.

Examples

# Set the minimum interval for transmitting multihop BFD control packets to 500 milliseconds.

<Sysname> system-view
[Sysname] bfd multi-hop min-transmit-interval 500