bfd echo enable
Use bfd echo enable to enable the echo packet mode.
Use undo bfd echo enable to restore the default.
Syntax
bfd echo [ send | receive ] enable
undo bfd echo [ send | receive ] enable
Default
The echo packet mode is disabled.
Views
Interface view
Predefined user roles
network-admin
Parameters
receive: Specifies the echo packet receiving capability.
send: Specifies the echo packet sending capability.
Usage guidelines
If you enable the echo packet mode for a BFD session in which control packets are sent and the session comes up, BFD does the following:
Periodically sends echo packets to detect link connectivity.
Decreases the control packet receiving rate at the same time.
Examples
# Enable the echo packet mode on VLAN-interface 11.
<Sysname> system-view [Sysname] interface vlan-interface 11 [Sysname-Vlan-interface11] bfd echo enable