vrrp ipv6 vrid shutdown

Use vrrp ipv6 vrid shutdown to disable an IPv6 VRRP group.

Use undo vrrp ipv6 vrid shutdown to restore the default.

Syntax

vrrp ipv6 vrid virtual-router-id shutdown

undo vrrp ipv6 vrid virtual-router-id shutdown

Default

An IPv6 VRRP group is enabled.

Views

Interface view

Predefined user roles

network-admin

Parameters

virtual-router-id: Specifies an IPv6 VRRP group by its virtual router ID in the range of 1 to 255.

Usage guidelines

You can use this command to temporarily disable an IPv6 VRRP group. After this command is configured, the VRRP group stays in initialized state, and its configurations remain unchanged. You can change its configuration, and your changes take effect when you enable the VRRP group again.

Examples

# Disable IPv6 VRRP group 1.

<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] vrrp ipv6 vrid 1 shutdown