preemption delay
Use preemption delay to set the preemption delay.
Use undo preemption delay to restore the default.
Syntax
preemption delay delay
undo preemption delay
Default
The preemption delay is 1 second.
Views
Smart link group view
Predefined user roles
network-admin
Parameters
delay: Specifies the preemption delay in the range of 0 to 300 seconds.
Usage guidelines
The preemption delay configuration takes effect only after a preemption mode is configured.
Preemption delay is the period of time that the primary port waits before taking over to collaborate with the switchover of upstream devices.
Examples
# Enable role preemption and set the preemption delay to 10 seconds.
<Sysname> system-view [Sysname] smart-link group 1 [Sysname-smlk-group1] preemption mode role [Sysname-smlk-group1] preemption delay 10
Related commands
preemption mode