display smart-link flush
Use display smart-link flush to display information about the received flush messages.
Syntax
display smart-link flush
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display information about the received flush messages.
<Sysname> display smart-link flush Received flush packets : 10 Receiving interface of the last flush packet : FortyGigE1/0/1 Receiving time of the last flush packet : 19:19:03 2014/04/21 Device ID of the last flush packet : 000f-e200-8500 Control VLAN of the last flush packet : 1
Table 28: Command output
Field | Description |
|---|---|
Received flush packets | Total number of received flush messages. |
Receiving interface of the last flush packet | Port that received the last flush message. |
Receiving time of the last flush packet | Time when the last flush message was received. |
Device ID of the last flush packet | Device ID carried in the last flush message. |
Control VLAN of the last flush packet | Control VLAN ID carried in the last flush message. |
Related commands
reset smart-link statistics