display rrpp verbose

Use display rrpp verbose to display detailed RRPP information.

Syntax

display rrpp verbose domain domain-id [ ring ring-id ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

domain domain-id: Specifies an RRPP domain by its ID in the range of 1 to 128.

ring ring-id: Specifies an RRPP ring by its ID in the range of 1 to 128. If you do not specify this option, the command displays detailed information for all rings in the specified RRPP domain.

Examples

# Display detailed information for all rings in RRPP domain 2.

<Sysname> display rrpp verbose domain 2
 Domain ID     : 2
 Control VLAN  : Primary 10, Secondary 11
 Protected VLAN: Reference instance 3, 5 to 7
 Hello timer   : 1 seconds, Fail timer: 3 seconds
 Fast detection status: Disabled
 Fast-Hello timer: 20 ms, Fast-Fail timer: 60 ms
 Fast-Edge-Hello timer: 10 ms, Fast-Edge-Fail timer: 30 ms

 Ring ID       : 1
 Ring level    : 0
 Node mode     : Master
 Ring state    : Completed
 Enable status : Yes, Active status: Yes
 Primary port  : FGE1/0/4                    Port status: UP
 Secondary port: FGE1/0/5                    Port status: BLOCKED

 Ring ID       : 2
 Ring level    : 1
 Node mode     : Edge
 Ring state    : -
 Enable status : No, Active status: No
 Common port   : FGE1/0/4                    Port status: -
                 FGE1/0/5                    Port status: -
 Edge port     : FGE1/0/3                    Port status: -

Table 27: Command output

Field	Description
Domain ID	RRPP domain ID.
Control VLAN	Control VLANs of the RRPP domain: Primary—Primary control VLAN. Secondary—Secondary control VLAN.
Protected VLAN	MSTIs corresponding to the VLANs protected by the RRPP domain. To view the VLAN-to-instance mappings, use the display stp region-configuration command (see Layer 2—LAN Switching Command Reference).
Hello timer	Hello timer value in seconds.
Fail timer	Fail timer value in seconds.
Fast detection status	Fast detection mechanism status: Enabled or Disabled.
Fast-Hello timer	Fast-Hello timer value in milliseconds.
Fast-Fail timer	Fast-Fail timer value in milliseconds.
Fast-Edge-Hello timer	Fast-Edge-Hello timer value in milliseconds.
Fast-Edge-Fail timer	Fast-Edge-Fail timer value in milliseconds.
Ring ID	RRPP ring ID.
Ring level	RRPP ring level: 0—Primary ring. 1—Subring.
Node mode	Node mode: Master node. Transit node. Edge node. Assistant edge node.
Ring state	RRPP ring state: Completed—The ring is healthy. Failed—The ring is not closed. If the ring is not enabled on the device operating as the master node or the device is not the master node of the ring, a hyphen (-) is displayed.
Enable status	RRPP ring status: Yes—Enabled. No—Disabled.
Active status	RRPP ring status. Yes—Active. No—Inactive. An RRPP ring can be active only when RRPP and the RRPP ring are both enabled. This field also helps you identify whether RRPP is enabled.
Primary port	The primary port field means the node mode is master node or transit node. A hyphen (-) appears when one of the following cases occurs: The port is not configured on the ring. The card to which the port belongs has not started up. The port is a member of a link aggregation group.
Secondary port	The secondary port field means the node mode is master node or transit node. A hyphen (-) appears when one of the following cases occurs: The port is not configured on the ring. The card to which the port belongs has not started up. The port is a member of a link aggregation group.
Common port	The common port field means the node mode is edge node or assistant edge node. A hyphen (-) appears when one of the following cases occurs: The port is not configured on the ring. The card to which the port belongs has not started up. The port is a member of a link aggregation group.
Edge port	The edge port field means the node mode is edge node or assistant edge node. A hyphen (-) appears when one of the following cases occurs: The port is not configured on the ring. The card to which the port belongs has not started up. The port is a member of a link aggregation group.
Port status	Port status: Down, up, or blocked. A hyphen (-) appears when one of the following cases occurs: The ring is inactive. The port is not configured on the ring. The card to which the port belongs has not started up. The port is a member of a link aggregation group.

prev	up	next
display rrpp statistics	home	domain ring