display rrpp brief

Use display rrpp brief to display brief RRPP information.

Syntax

display rrpp brief

Views

Any view

Predefined user roles

network-admin

network-operator

Examples

# Display brief RRPP information.

<Sysname> display rrpp brief
 Flags for node mode: M –- Master, T -- Transit, E -- Edge, A -- Assistant-edge

 RRPP protocol status: Enabled

 Domain ID     : 1
 Control VLAN  : Primary 5, Secondary 6
 Protected VLAN: Reference instance 0 to 2, 4
 Hello timer   : 1 seconds, Fail timer: 3 seconds
 Fast detection status: Disabled
 Fast-Hello timer: 20 ms, Fast-Fail timer: 60 ms
 Fast-Edge-Hello timer: 10 ms, Fast-Edge-Fail timer: 30 ms
  Ring  Ring   Node  Primary/Common            Secondary/Edge            Enable
  ID    level  mode  port                      port                      status
 ------------------------------------------------------------------------------
  1     1      M     FGE1/0/1                  FGE1/0/2                  Yes

 Domain ID     : 2
 Control VLAN  : Primary 10, Secondary 11
 Protected VLAN: Reference instance 0 to 2, 4
 Hello timer   : 1 seconds, Fail timer: 3 seconds
 Fast detection status: Disabled
 Fast-Hello timer: 10 ms, Fast-Fail timer: 30 ms
  Ring  Ring   Node  Primary/Common            Secondary/Edge            Enable
  ID    level  mode  port                      port                      status
 ------------------------------------------------------------------------------
  1     0      T     FGE1/0/3                  FGE1/0/4                  Yes
  2     1      E     FGE1/0/3                  FGE1/0/5                  Yes
                     FGE1/0/4

Table 24: Command output

Field	Description
Flags for node mode	RRPP node mode: M—Master node. T—Transit node. E—Edge node. A—Assistant edge node.
RRPP protocol status	RRPP status: Enabled—Globally enabled. Disabled—Globally disabled.
Domain ID	RRPP domain ID.
Control VLAN	Primary and secondary control VLANs of the RRPP domain.
Protected VLAN	MSTIs corresponding to the VLANs protected by the RRPP domain. To view the VLAN-to-instance mappings, use the display stp region-configuration command (see Layer 2—LAN Switching Command Reference).
Hello timer	Hello timer value in seconds.
Fail timer	Fail timer value in seconds.
Fast detection status	Fast detection status: Enabled or Disabled.
Fast-Hello timer	Fast-Hello timer value in milliseconds.
Fast-Fail timer	Fast-Fail timer value in milliseconds.
Fast-Edge-Hello timer	Fast-Edge-Hello timer value in milliseconds.
Fast-Edge-Fail timer	Fast-Edge-Fail timer value in milliseconds.
Ring ID	RRPP ring ID.
Ring level	RRPP ring level: 0—Primary ring. 1—Subring.
Primary/Common port	This field displays primary ports when the node mode is master node or transit node. This field displays common ports when the node mode is edge node or assistant edge node. A hyphen (-) appears when one of the following cases occurs: The port is not configured on the ring. The card to which the port belongs has not started up. The port is a member of a link aggregation group.
Secondary/Edge port	This field displays secondary ports when the node mode is master node or transit node. This field displays edge ports when the node mode is edge node or assistant edge node. A hyphen (-) appears when one of the following cases occurs: The port is not configured on the ring. The card to which the port belongs has not started up. The port is a member of a link aggregation group.
Enable status	RRPP ring status: Yes—Enabled. No—Disabled.

prev	up	next
control-vlan	home	display rrpp ring-group