cfd hardware-cc
Use cfd hardware-cc to enable hardware CC.
Use undo cfd hardware-cc to disable hardware CC.
NOTE: This command is available in Release 2422 and later versions. | ||
Syntax
cfd hardware-cc service-instance instance-id remote-mep mep-list
undo cfd hardware-cc service-instance instance-id remote-mep mep-list
Default
Hardware CC is disabled.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
service-instance instance-id: Specifies an Ethernet service instance by its ID in the range of 1 to 32767.
remote-mep mep-list: Specifies remote MEPs. The mep-list argument specifies a space-separated list of up to 10 MEP items. Each item specifies a MEP ID or a range of MEP IDs in the form of mep-id [ to mep-id ]. The value range for MEP IDs is 1 to 8191.
Examples
# Enable hardware CC on FortyGigE 1/0/1 to detect connection to remote MEP 5 in Ethernet service instance 1.
<Sysname> system-view [Sysname] interface fortygige 1/0/1 [Sysname-FortyGigE1/0/1] cfd hardware-cc service-instance 1 remote-mep 5