oam remote-loopback

Use oam remote-loopback start to enable Ethernet OAM remote loopback on the specified Ethernet port.

Use oam remote-loopback stop to disable Ethernet OAM remote loopback on the Ethernet port.

Syntax

oam remote-loopback start

oam remote-loopback stop

Default

Ethernet OAM remote loopback is disabled on the Ethernet port.

Views

Layer 2 Ethernet port view, Layer 3 Ethernet port view

Predefined user roles

network-admin

Usage guidelines

Ethernet OAM remote loopback is available only after the Ethernet OAM connection is established and can be performed only by the Ethernet OAM entities operating in active Ethernet OAM mode.

You can enable Ethernet OAM remote loopback on a specified port in user view or system view, or enable it on the current port in port view. The configurations have the same effect.

Examples

# Configure the active Ethernet OAM mode and enable Ethernet OAM on FortyGigE 1/0/1, and then enable Ethernet OAM remote loopback on FortyGigE 1/0/1 in Layer 2 Ethernet port view.

<Sysname> system-view
[Sysname] interface fortygige 1/0/1
[Sysname-FortyGigE1/0/1] oam mode active
[Sysname-FortyGigE1/0/1] oam enable
[Sysname-FortyGigE1/0/1] oam remote-loopback start

Related commands

• oam enable

• oam mode

• oam remote-loopback interface