Restoring the main next-startup configuration file from a TFTP server
To restore the main next-startup configuration file from a TFTP server, the device performs the following tasks:
Downloads a configuration file from a TFTP server to the root directory of each member's flash memory.
Specifies the file as the main next-startup configuration file.
Before restoring the next-startup configuration file, make sure the following requirements are met:
The server is reachable.
The server is enabled with TFTP service.
You have read and write permissions to the server.
To restore the main next-startup configuration file from a TFTP server:
Step | Command | Remarks |
|---|---|---|
1. Restore the main next-startup configuration file from a TFTP server in user view. | restore startup-configuration from src-addr src-filename | This command is not supported in FIPS mode. |
2. Verify that the specified configuration file has been set as the main next-startup configuration file. | display startup | Optional. |