Removing the MS mode and FS mode settings for an ERPS ring
After you configure this task, the owner node can ignore the WTR timer and immediately switch traffic to the recovered link upon link recovery.
This task also switches an ERPS ring from non-revertive mode to revertive mode if the ERPS ring is in non-revertive mode.
To remove the MS mode and FS mode settings for an ERPS ring:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Remove the MS mode and FS mode settings for an ERPS ring. | erps clear ring ring-id instance instance-id | N/A |