Associating a ring with a subring
On a multi-ring network, perform this task if you want to advertise topology changes in a subring to a ring.
To associate a ring with a subring:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter ERPS ring view. | erps ring ring-id | N/A |
3. Enter ERPS instance view. | instance instance-id | N/A |
4. Associate a ring with the subring. | sub-ring connect ring ring-id instance instance-id | By default, a subring is not associated with any rings. |