display npv traffic-map

Use display npv traffic-map to display the traffic mapping information (downlink-to-uplink interface mappings).

Syntax

display npv traffic-map [ vsan vsan-id ] [ interface interface-type interface-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. If you do not specify a VSAN, this command displays the traffic mapping information of all VSANs. On an FCF-NPV switch, this command displays the traffic mapping information of only VSANs operating in NPV mode.

interface interface-type interface-number: Specifies a downlink interface by its type and number. If you do not specify a downlink interface, this command displays the traffic mapping information of all downlink interfaces.

Usage guidelines

Only NPV and FCF-NPV switches support this command.

Examples

# Display traffic mapping information.

<Sysname> display npv traffic-map
NPV traffic map information of VSAN 1:
Server interface       External interface
Vfc1                   Vfc3
Vfc2                   Vfc3