zoneset rename

Use zoneset rename to rename a zone set.

Syntax

zoneset rename old-name new-name

Views

VSAN view

Predefined user roles

network-admin

Parameters

old-name: Specifies the name of the zone set to be renamed, a case-sensitive string of 1 to 64 characters. This name can contain letters (uppercase and lowercase), numbers, and special characters (see Table 26). It must start with a letter.

new-name: Specifies the new zone set name, a case-sensitive string of 1 to 64 characters. This name can contain letters (uppercase and lowercase), numbers, and special characters (see Table 26). It must start with a letter.

Usage guidelines

Only FCF switches and VSANs operating in FCF mode support this command.

Examples

# Create a zone set named zs1.

<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] zoneset name zs1
[Sysname-vsan1-zoneset-zs1] quit

# Rename zone set zs1 as zs2.

[Sysname-vsan1] zoneset rename zs1 zs2

Related commands

• display zoneset

• zoneset name