Configuring optional parameters for an NQA test group
Optional parameters for an NQA test group are valid only for tests in this test group.
Unless otherwise specified, the following optional parameters are applicable to all test types.
To configure optional parameters for an NQA test group:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter NQA test group view. | nqa entry admin-name operation-tag | N/A |
3. Enter test type view of a test group. | type { dhcp | dlsw | dns | ftp | http | icmp-echo | snmp | tcp | udp-echo | udp-jitter | voice } | N/A |
4. Configure the description for a test group. | description text | Optional. By default, no description is available for a test group. |
5. Configure the interval between two consecutive tests for a test group. | frequency interval | Optional. By default, the interval between two consecutive tests for a test group is 0 milliseconds. Only one test is performed. If the last test is not completed when the interval specified by the frequency command is reached, a new test does not start. |
6. Configure the number of probe operations to be performed in one test. | probe count times | Optional. By default, one probe operation is performed in one test. Not available for voice tests, Only one probe operation can be performed in one voice test. |
7. Configure the NQA probe timeout time. | probe timeout timeout | Optional. By default, the timeout time is 3000 milliseconds. Not available for UDP jitter tests. |
8. Configure the maximum number of hops a probe packet traverses in the network. | ttl value | Optional. 20 by default. Not available for DHCP tests. |
9. Configure the ToS field in an IP packet header in an NQA probe packet. | tos value | Optional. 0 by default. |
10. Enable the routing table bypass function. | route-option bypass-route | Optional. Disabled by default. Not available for DHCP tests. |