Verifying the configuration

After receiving an RA message with the M flag set to 0 and the O flag set to 1, Switch A automatically enables the stateless DHCPv6 function.

# Use the display ipv6 dhcp client command to view the current client configuration information. If the client successfully obtains configuration information from the server, the following information will be displayed.

[SwitchA-Vlan-interface2] display ipv6 dhcp client interface vlan-interface 2
Vlan-interface2 is in stateless DHCPv6 client mode
State is OPEN
Preferred Server:
    Reachable via address     :  FE80::213:7FFF:FEF6:C818
    DUID                      :  0003000100137ff6c818
    DNS servers               :  1:2:3::5
                                 1:2:4::7
    Domain names              :  abc.com
                                 Sysname.com

# Use the display ipv6 dhcp client statistics command to view the current client statistics.

[SwitchA-Vlan-interface2] display ipv6 dhcp client statistics
Interface                     :  Vlan-interface2
Packets Received              :  1
        Reply                 :  1
        Advertise             :  0
        Reconfigure           :  0
        Invalid               :  0
Packets Sent                  :  5
        Solicit               :  0
        Request               :  0
        Confirm               :  0
        Renew                 :  0
        Rebind                :  0
        Information-request   :  5
        Release               :  0
        Decline               :  0