Applying the address pool to an interface

After an address pool is applied to an interface, a prefix and other configuration parameters can be selected from the address pool and assigned to the DHCPv6 client requesting through the interface.

Follow these guidelines when you apply an address pool to an interface:

To apply an address pool to an interface:

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter interface view.

interface interface-type interface-number

N/A

3. Apply the DHCPv6 address pool to the interface.

ipv6 dhcp server apply pool pool-number [ allow-hint | preference preference-value | rapid-commit ] *

Not configured by default