Setting the age timer for ND entries in stale state

ND entries in stale state have an age timer. If an ND entry in stale state is not refreshed before the timer expires, it transits to the delay state. If it is still not refreshed in five seconds, the ND entry transits to the probe state, and the device sends an NS message for detection. If no response is received, the device removes the ND entry.

To set the age timer for ND entries in stale state:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Set the age timer for ND entries in stale state.	ipv6 neighbor stale-aging aging-time	Optional. Four hours by default.

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Set the age timer for ND entries in stale state.

ipv6 neighbor stale-aging aging-time

Optional.

Four hours by default.

prev	up	next
Configuring the maximum number of neighbors dynamically learned	home	Configuring parameters related to RA messages