snmp-agent trap life

Syntax

snmp-agent trap life seconds

undo snmp-agent trap life

View

System view

Default level

3: Manage level

Parameters

seconds: Timeout time, which ranges from 1 to 2,592,000 seconds.

Description

Use the snmp-agent trap life command to configure the holding time of the traps in the queue. Traps are discarded when the holding time expires.

Use the undo snmp-agent trap life command to restore the default holding time of traps in the queue.

By default, the holding time of SNMP traps in the queue is 120 seconds.

	NOTE: The SNMP module sends traps in queues. As soon as the traps are saved in the trap queue, a timer is started. If traps are not sent out until the timer times out (the holding time configured by using this command expires), the system removes the traps from the trap sending queue.

Related commands: snmp-agent trap enable, snmp-agent target-host.

Examples

# Configure the holding time of traps in the queue as 60 seconds.

<Sysname> system-view
[Sysname] snmp-agent trap life 60