Switch fails in layer 2 multicast forwarding
Symptom
A switch fails to implement Layer 2 multicast forwarding.
Analysis
IGMP snooping is not enabled.
Solution
Enter the display current-configuration command to view the running status of IGMP snooping.
If IGMP snooping is not enabled, use the igmp-snooping command to enable IGMP snooping globally, and then use igmp-snooping enable command to enable IGMP snooping in VLAN view.
If IGMP snooping is disabled only for the corresponding VLAN, just use the igmp-snooping enable command in VLAN view to enable IGMP snooping in the corresponding VLAN.