mvrp registration
Syntax
mvrp registration { fixed | forbidden | normal }
undo mvrp registration
View
Layer 2 Ethernet port view, Layer 2 aggregate interface view, port group view
Default level
2: System level
Parameters
fixed: Specifies the fixed registration mode.
forbidden: Specifies the forbidden registration mode.
normal: Specifies the normal registration mode.
Description
Use mvrp registration to set the MVRP registration mode on the port.
Use undo mvrp registration to restore the default.
By default, the MVRP registration mode is normal.
This command is available only on trunk ports.
Related commands: display mvrp running-status.
Examples
# Configure Ethernet 1/0/1 as a trunk port, and set the MVRP registration mode to fixed on the port.
<Sysname> system-view [Sysname] interface ethernet 1/0/1 [Sysname-Ethernet1/0/1] port link-type trunk [Sysname-Ethernet1/0/1] port trunk permit vlan all [Sysname-Ethernet1/0/1] mvrp registration fixed